Flow Switch EFS 1/2" BSP
Flow Switch EFS 1/2" BSP
Back to products
Flow Switch Fire EFS
Flow Switch Fire EFS
Click to enlarge
Ensim

Flow Switch high temp. paddle type EFS

EFS Paddle Flow Switches are used for the monitoring of liquid flow in pipes. When the liquid flow stops or starts its paddle actuates a microswitch (NO/NC) , hereby electrical equipment is protected .The flow switch is suitable to use all kinds
of non-corrosive liquids.

download pdf datasheet

6 People watching this product now!
SKU: EFS paddle 31/32/41/61 Categories: ,
Description

Description

Flow adjustable via screw mechanism.The products are factory setted. Users can change the adjustment according to application needs.

Advantages:

  • Hot and cold water can be used
  • Suitable for hot and cold liquids.
  • Air tight design.

Installation:

Pay attention for right mounting, direction is shown on the switch housing.
Install on the return pipe.The switch must be mounted far from elbows, corners, pumps.

Technical Specifications:

Fluid: Liquid
Process Temperature: – 40/+120°C
Process Pressure: 10 bar
Connection: 1″ BSP
Contact: SPDT, 15A /250VAC 
Case Material: PP
Cover Material: ABS Plastic
Pallet Material: Stainless Steel
Protection Rating: IP64

 

 

About Ensim
More Information
646319313_1513254980809423_2521769434331341523_n
649249201_1517453540389567_2040018977975342071_n
653705091_1525223946279193_4902815804080826887_n

    Products & Features

    Ensim Sensors from Turkiye provides a variety of level, flow, pressure and temperature instruments for liquids, solids and powders designed for demanding industrial environments in explosive environments for point detection (switches) or continuous monitoring (transmitters):
    • Radar Level: non-contact and guided wave sensors
    • Capacitive Level Sensors:
    • Magnetic By-pass and Visual Indicators
    • Hydrostatic
    • Ultrasonic
    • Magnetic Float 
    • Rotary Paddle, Vibrating Fork/Rod 
    • Flow Switches

    Key Benefits

    • Rugged Construction, Reliability, Low Maintenance
    • Advanced Level Sensing: in dusty, humid, or smoky environments
    • Easy Integration: Designed for quick commissioning and simple installation into existing processes. 

    Related products
    Quick view

    Itabar Pitot Tube Steam Flow

    In stock

    SKU: Itabar ibrd-ibfd-ftmd-fthd
    The ITABAR Steam Sensors are designed to measure saturated and superheated steam in all areas of power generation and industrial and process technologies. Flowsensors for fixed installation: IBRF series with threaded connection IBFD series with flanged connection IBFD HT series with flanged connection for superheated steam IBFD HTG series with complete welded construction for superheated steam Flotap Sensors for installation under pressure: FTMD series with threaded connection FTHD series with flanged connection and guided rod spindle download pdf datasheet
    Quick view

    Massflow Sensor RHM06 small size 0.15 – 20 kg/min

    In stock

    SKU: RHM06
    The RHM06 is a low risk, low maintenance solution for critical flow applications everywhere. High pressure and temperature options comined with a selection of wetted material make the RHM06 a true fit and forget device. PDF datasheet
    Quick view

    Ultrasonic portable Clamp-On Flow Meter

    In stock

    SKU: SSEA UFP1.0
    The Schmierer SEA UFP 1.0 portable clamp-on ultrasonic flowmeter is the ideal flow measurement tool for short or long-term monitoring of several flow points, data logging and verification of buit-in flowmeters. The transducers are easily set up and can be used for pipe sizes from DN 25 to 5000. The ergonomically designed handheld transmitter comes with a metal protection case against corrosion and a backlit color digital display. The recharchable battery lasts for 12 hours of continuous operation download pdf datasheet
    Quick view

    VA Flowmeter RA60/FA60 protective steel tube

    In stock

    SKU: RA60/FA60
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 60 and FA 60 are based on the variable area float principle. In pipelines the RA 60 is installed by means of pipe unions and the FA 60 is mounted between flanges. The borosilicate glass measuring cone is located inside a protective steel tube with an inspection window. VA flow meters RA 60 and FA 60 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 60 and FA 60 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. download pdf datasheet
    Quick view

    VA Flowmeter RA65/FA65 protective steel tube

    In stock

    SKU: RA65/FA65
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 65 and FA 65 are based on the variable area float principle. In pipelines the RA 65 is installed by means of pipe unions and the FA 65 is mounted between flanges. The borosilicate glass measuring cone is located inside a protection steel tube with an inspection window. VA flow meters RA 65 and FA 65 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 65 and FA 65 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter. download pdf datasheet
    Quick view

    VA Flowmeter SGM PP/PVC

    In stock

    SKU: SGM VA PP/PVC
    The SGM PP/PVC VA Flow meter is a cost effective fully plastic Version - for chemical applications with highly acidic media, e.g. hydrochloric acid. Since the vertical position of the float is transmitted magnetically to a dial gauge, the SGM, as opposed to standard type variable area flow meters with a glass tube, is also suitable for measuring the flow of opaque media. Each device is individually calibrated to meet customer specifics and fitted with a medium specific scale. download pdf datasheet
    Quick view

    Vane Gasflow Anemometer Meter insertion type

    In stock

    SKU: Vane Flow insertion FA
    Flow rate and flow velocity in pipes and ducts, measuring flow profiles, aerodynamic research, measuring laminar flow, also at high gas temperatures, landfill gas, exhaust gas, flow rate and flow velocity in flowing waters. download pdf datasheet
    Quick view

    Vortex Flow Meter

    In stock

    SKU: SSEA VF
    The VF Vortex Flowmeter measures the volumetric flow of fluids (gases, vapors, liquids) in closed pipes. It is based on the Vortex shedding principle, (or Karman Vortex Effect). The fluid passing through the measuring tube is separated by a triangular prism with a broad flat front and generates two lines of eddies or vortices, the Karman Vortex shedding street. The vortex shedding frequency is proportional to the flow rate.It is detected by a sensor with 4 piezo-electric elements and converted into an electronic output signal. High quality and safety standards: no moving wear off parts inside, no abrasion fully welded SS304 body (opt. SS316) Japanese OVAL technology and design embedded sensor Digital Circuit Board for anti vibration and anti interference Easy installation and flow conversion, (w. pressure and temp. compensation) download pdf datasheet