VA Flowmeter SGM PP/PVC
VA Flowmeter SGM PP/PVC
Back to products
VA Flowmeter RA77/FA77 plastic tube - glass cone
VA Flowmeter RA77/FA77 plastic tube - glass cone
Click to enlarge
Kirchner & Tochter

VA Flowmeter RA65/FA65 protective steel tube

VA Flow Meter with protective steel tube and borosilicate measuring cone

The measuring units RA 65 and FA 65 are based on the variable area float principle.
In pipelines the RA 65 is installed by means of pipe unions and the FA 65 is mounted between flanges. The borosilicate glass measuring cone is located inside a protection steel tube with an inspection window.
VA flow meters RA 65 and FA 65 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 65 and FA 65 are used e.g. in plant and process engineering.

By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter.

download pdf datasheet

0 People watching this product now!
SKU: RA65/FA65 Categories: ,
Description

Description

  • calibrated borosilicate measuring cone

  • armature with protective steel tube

  • perspex half-shell as shatter protection

  • reliable due to simple mode of operation

  • scales specific for the media to be measured

  • optionally

    • limit value switches

    • analogue output 4 – 20mA

    • explosion-proof design

    • PVC lining for flow measurement of aggressive fluids

About Kirchner & Tochter
More Information

The know-how of Kirchner specialists competence, experience and years of expertise (since 1951) are the foundations of the Kirchner success story.

Kirchner has specialized in the production of mechanical flow measurement and monitoring, VA, Flapper type and DP flow meters,  in particular for applications in the water/wastewater/slurries, chemical industries and in furnace and system design.

  • Wide range of products
  • Specialized product how know with years of experience and expertise
  • Customized solutions
  • Certified quality Management, (PED, IECEx/ATEX, VDS)
  • Short and reliable delivery cycles

Variable area flow meters

Variable area flow meters with glass cone are used in all industries, because they represent a very cost-effective and reliable method.
Appliances with metal measuring tube (SGM) is the optimal solution at high temperatures and pressures. Because of the extensive electronic modules they are predestined in the processing plants of the chemical industry.
Devices with plastic cone  (SKT / SKP / SKPVC) are the most cost-effective method for flow measurement.

Short-tube flow meters

Short-tube variable area flow meters are suitable for the measurement of small and low flow rates and are available in different types, e.g. with valve and limit switches.

Flap-type flow meters

Reliable measuring devices even for large flow rates in numerous versions with limit switches and electronically measured value transducers. The devices are used in water treatment plants, power stations, to monitor cooling processes, and in building technology and swimming pools.

Differential pressure flow meters

These devices are manufactured with a wide variety of nominal widths. Units with small nominal widths such as DDM / DDW are applied in cooling circuits and monitoring of liquids. The sprinkler orifice plate SMB is installed in stationary sprinkler systems and has been approved by the VdS damage prevention.

Electrical accessory equipment

Accessory products to evaluate the data of the flow meters in control systems, PLC, process automation and in process data recording systems.

Sight glasses

The devices in the sight glass series are used for the visual display of liquid media. The sight glass consists of a sight glass tube of borosilicate glass, four spacers and two connector flanges. Due to its simple design, the service is maintenance-free. Thanks to external radial seals, there are no changes in cross-section and thus no pressure loss.

The media that can be used include for example water, oil and alkaline or acidic liquids. By selecting the material appropriately, the sight glass can be also be used with aggressive media.

Level Indicators

The devices of the NA and NA-V4A model series operate according to the principle of buoyancy. They are designed for vertical installation only.

Consisting of display, flange, float tube and float the NA serves as a level indicator for e.g. underfloor installation liquid container.
The level indicator NA-V4A, consisting of a stainless steel sleeve, a float tube made of borosilicate glass and the connection heads, is mounted outside of the tank.

Each device contains a measuring tube made of borosilicate glass and is custom-made with the desired connection geometry.

With the installation of electrical limit value switches that are adjustable over the entire measuring range, the devices can also be used for remote monitoring.

Bypass flow meters

The wide choice of materials that can be used to manufacture our DST bypass flow meters allows flow measurement of the most varied fluids.

The low-cost device in PVC is frequently used in swimming-pool water technology. The device in PVDF is suitable for the flow measurement of aggressive media, e.g. in water treatment, while the DST-1/2 is mainly used for flow measurement of air and gases. The measuring range extends from 0.02 - 0.16 m3/h to 300 - 1800 m3/h for H20, and from 0.15 m3/h - 1.5 to 1200 - 6000 m3/h for air at STP.

The DST bypass flow meter operates on the differential-pressure method. A ring with an orifice plate is installed in the pipeline. The orifice plate causes constriction of the flow and effects a drop in pressure. This pressure drop is proportional to the square of the flow rate.

If the pressure tap upstream of the orifice plate is connected by a pipe to that downstream of the orifice plate, a partial flow will flow through that pipe. This partial flow is proportional to the flow rate in the main pipeline.

The partial flow can be turned on and off, as required, by installing two ball valves in the bypass line.

Related products
Quick view

Electro Magnetic Flow Meter SSEAMFII

In stock

SKU: SSEA MFII
The SSEAMFII series electromagnetic flowmeter is suitable for the conductive medium with a conductivity higher than 5μs / cm. It is composed of the sensor and converter, and the sensor consists of measuring tube, electrodes, excitation coils, iron core and shell and other components. After the traffic signal is amplified, processed and operated by converter, you can see the instantaneous flow, cumulative flow, output pulse, analog current and other signals for the measurement and control of fluid flow. It adopts the smart converter so that it not only has the measurement, display and other functions, but also supports the remote data transmission, wireless remote control, alarm and other functions. ◆ Excellent measurement repeatability and linearity ◆ Good reliability and anti-interference performance ◆ Good pressure resistance sealing ability ◆ Low pressure loss measurement tube ◆ High intelligentization ◆ Maintenance-free download pdf datasheet
Quick view

Itabar Pitot Tube Flotap Fluid&Gas Flow

In stock

SKU: Itabar ftn-ftm-fth
The ITABAR flow sensor series is designed to measure the volumetric flow of liquids and gases. Installation & removal without process shut down. FTN series threaded version FTM series threaded version with guided rod spindles FTH series flanged version with guided rod spindles download pdf datasheet
Quick view

Itabar Pitot Tube Fluid&Gas Flow

In stock

SKU: Itabar ibr-ibf-ibf100
The ITABAR flow sensor series is designed to measure the volumetric flow of liquids and gases. They are available as threaded (IBR) or flanged (IBF) versions with a pipe size range from DN 25 to DN 2000 and a max temperature of up to 1175°C (flanged). The Flo-tap option allows installation and removal under pressure. nstallation & removal requires process shut down. IBR series with threaded process connections IBF series with flanged process connections IBF 100 series for flue gass applications with opt. air purge unit download pdf datasheet
Quick view

Ultrasonic Clamp-On Flow Meter

In stock

SKU: SSEA UCOF
The Schmierer SEA UFP 1.0 portable clamp-on ultrasonic flowmeter is the ideal flow measurement tool for short or long-term monitoring of several flow points, data logging and verification of buit-in flowmeters. The transducers are easily set up and can be used for pipe sizes from DN 25 to 5000. The ergonomically designed handheld transmitter comes with a metal protection case against corrosion and a backlit color digital display. The recharchable battery lasts for 12 hours of continuous operation download pdf datasheet
Quick view

Ultrasonic portable Clamp-On Flow Meter

In stock

SKU: SSEA UFP1.0
The Schmierer SEA UFP 1.0 portable clamp-on ultrasonic flowmeter is the ideal flow measurement tool for short or long-term monitoring of several flow points, data logging and verification of buit-in flowmeters. The transducers are easily set up and can be used for pipe sizes from DN 25 to 5000. The ergonomically designed handheld transmitter comes with a metal protection case against corrosion and a backlit color digital display. The recharchable battery lasts for 12 hours of continuous operation download pdf datasheet
Quick view

VA Flowmeter SGM

In stock

SKU: SGM VA
VA Flow Meter for high temperature & pressure, chemical applications In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow in pipelines, the SGM is the obvious choice as a reliable device for measuring the flow of liquids and gases. Since the vertical position of the float is transmitted magnetically to a dial gauge, the SGM, as opposed to standard type variable area flow meters with a glass tube, is also suitable for measuring the flow of opaque media. Each device is individually calibrated to meet customer specifics and fitted with a medium specific scale. download pdf datasheet
Quick view

VA Flowmeter SKT/SKT/SKPVC plastic cone

In stock

SKU: SKT/SKT/SKPVC
Plastic Cone VA Flow Meter for cost effective Measurement The plastic flow meters SKT, SKP and SKPVC are based on the variable area float principle. The flowrate is indicated on a scale printed on the measuring tube by the indicator edge of the float. The indicator edge is identical with the largest diameter of the float. The standard scale has been designed in l/h and in % for the medium water (20 °C) and has two adjustable nominal value indications. Special scales for other substances are available on request. download pdf datasheet
Quick view

Vortex Gasflow Meter measuring tube

In stock

SKU: Vortex VA measuring tube
Flow rate and flow velocity measurement in wet and/or particulate-laden gases, biogas or exhaust gas, also according to Clean Air Guidelines, (TA Luft). Flow rate measurement of sludge aeration air, sewage gas, landfill gas, water vapour and engine intake air on test stations. Flow velocity in climatic wind tunnels, diluted car exhaust gas, traffic tunnels and in nuclear reactor technology. download pdf datasheet