Ensim DX-ECAP explosion proof capacitive level transmitters for highly sensitive and durable level measurement of

• conductive liquids
• low conductive liquids
• granulated materials with solid particles
• adhesive and acid/base liquids
   

Full-empty calibration can be performed easily and safely. Different designs and materials for special industrial solutions. CE, Ex certified.

Ensim DX-ECAS capacitive level switches

• conductive liquid
• low conductive liquid
• granulated materials with solid particle
• adhesive and acid/base liquids, cement
  
• Ex certified
  
• optional up to 400°C

The SRU25X lightweight, stainless steel pressure gauge with heavy duty mini diaphragm seal is the ideal choice for

• corrosive, viscous, sedimentous process media
• with a high temperature
• or high pressure

The diaphragm is AISI 316L welded to the body to ensure separation of the filling fluid from the process medium.

The PTX-36 Pressure Transmitter from Schmierer SEA with local display with

• both analog (solid front gauge case)
• and 4-20 mA output for PLC/PID and data loggers

shows clear reading in the case of power failure.
It is used in Pharmaceutical, OIL&GAS, Refrigeration, HVAC and Compressor industries. 

Rough industrial work environments with

• vibrations
• sudden pressure changes or
• high purity demands

require a special protection mechanism for the pressure gauge movement with the needle pointer. The Manodamp® technology offers this solution.

The Ensim DX-ELB explosion proof level switch is designed for alarm level control in pressure boilers and stringent liquid tanks. It provides a long-lasting measurement opportunity for point control in liquid tanks with high pressure or temperature.

• resistance to high temperature, up to 250°C
• up to 25 bar pressure
• for liquids and optionally granular fluids
• long lasting contact structure
• operations in vertical or horizontal connection

Bopp & Reuter Filling and Dosing Solutions for water-based media in the Beverage, Chemical and Pharmaceutical Industry:

• shortest filling time: < 0.1 second
• highest measuring accuracy: 0.01%
  
• lowest conductivity: >1µS/cm

Complete systems with flow meter, batch controller, valves and nozzles and flow computing operator terminal.

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures:

• for hydrocarbons, highly aggressive chemicals, beverages, pastes, foams
• high accuracy (up to 0.01%) - custody transfer - long term stability
• tuning fork principle - robust design - maintenance free
• 400 point correction table for customized parameterization
• Output signals scalable for density and concentration, HART
• Ex protection: flameproof or intrinsically safe

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures

• acids and bases (hydrochloric/sulphuric/nitric acid, sodium hydroxide, aromatic chlorine solution, ammonia, urea, chlorine, caustic soda,…)
• alcohol and solvents (ethanol, methanol, DMAC, methyl butanol, aceton, glycol, adblue, anti-freeze…)
• solids in liquids (porcelain, ketchup, fat in milk, sugar/Brix, water/starch, tartaric acid…)
• Density measurement (hydro carbons, bio fuel, air bubbles in water …)

The Ensim ELT vibrating switches used for level control with corrosive or viscous fluids, powders and solids.

Both tuning forks and single rods work reliable with sticky media.

The vibration sensitivity can be adjusted after installation.

The single rod version avoids jamming of granules.