The pressure will be transmitted without any time delay from the highly flexible and sensitive seal membrane to the measuring instrument using a transmission fluid.
Schmierer Seals are manufactured under highest quality standards with selected materials and coatings, (elastomers, rubbers, high grading stainless steels, Hastelloy, Monel, Inconel, Tantalum, Titanium) for customer specific requirements on process media, pressure, temperature and mounting positions. The connecting part can be made or protected (lined) with suitable material, i.e. SS 316L, PP, PVC, PVDF etc. They will run through several test cycles on tightness and shape of the surface.
The variety of mounting and connection types (flange,sandwich, threaded, tri-clamp, inline, flush, extended, capillary...) make it suitable
- for corrosive, aggressive media (Chemical, Petro-Chemical)
- for toxic and hazardous media (Acid and Alkaline)
- for f&b, sanitary, hygienic and aseptic applications
- for viscous, crystalizing, polymerizing media (Palm Oil, Oleo Chemical)
- for non-homogenous media with particles (Paper & Pulp)
- for ultra pure process fluids (Semiconductor, Solar)
- for high temperature and pressure procedures
With our special diaphragm seal filling station Schmierer diaphragm seals can be locally connected in Shah Alam to pressure gauges, switches and transmitters and DP instruments of all brands.
Diaphragm Seals Design Types:
V120, V121 standard flanged |
V120/123,V121/124 flanged with screwed connection |
V120/150/158, V121/151/159 flanged with open connection | V184 flush welded |
V185 flush with capillary |
V188 flush with extension |
V165 flush treaded |
V188 Paper & Pulp |
V164 Homogenizer | V 163 Varivent, V166 Neumo | V162 chemical tri clamp | V190 Inline |
Diaphragm Seal Coatings |
|||
V120 PTFE |
V120 PTFE - V123 PVDF | V123 PVDF | |