TTB Series Type B High-Temperature Ceramic Thermocouples Noble Metal

Measure ultra-high furnace and kiln temperatures up to +1800°C with unmatched noble-metal durability. Therefore, steelmakers, glass manufacturers, and high-temperature ceramic engineers deploy Limatherm TTB Series Type B thermocouples. Specifically, they rely on these PtRh30-PtRh6 sensors where Type S or Type R probes reach their upper thermal limits. Because the TTB Series houses high-rhodium platinum wires inside gas-tight Corundum C799 ceramic protection tubes, it resists severe thermal stress and aggressive furnace vapors completely. Furthermore, its rugged aluminum connection head shields internal wiring cleanly. Consequently, your facility prevents premature sensor burnout. As a result, you maintain accurate, drift-free thermal control across extreme continuous firing zones.

Description

Description

Product Types

The Limatherm TTB Series Type B thermocouple platform maps into distinct mechanical builds and ceramic protection sheaths. Thus, you can match your exact ultra-high temperature and chemical resistance needs:

  • TTB Single-Tube Ceramic Series (e.g., TTBC-22): Outfitted with a single gas-tight Corundum C799 alumina sheath. Therefore, it provides rapid thermal response and continuous high-heat tracking up to +1700°C (+1800°C peak).
  • TTB Double-Tube Ceramic Series (e.g., TTBC-42): Engineered with an inner gas-tight ceramic capillary tube plus a heavy-duty outer protective ceramic sheath. Consequently, it delivers maximum mechanical strength and vapor resistance in turbulent furnaces.
  • TTB Platinum-Coated Series (e.g., TTBC-ACT): Built with a Corundum C799 sheath coated in an outer platinum-rhodium barrier. Thus, it resists molten glass erosion and corrosive alkaline vapors completely.

Working Principle

The sensor operates continuously using a noble-metal Type B (PtRh30-PtRh6) thermocouple junction insulated inside multi-bore alumina capillaries and shielded by a gas-tight Corundum C799 tube. First, intense radiant and convective heat inside the furnace transfers cleanly through the high-purity ceramic protection sheath. Because dense Corundum C799 walls block reducing atmospheres, sulfur compounds, and metallic vapors, the noble-metal wires remain completely uncontaminated. Next, the PtRh30-PtRh6 measuring junction captures extreme temperature shifts immediately. Thus, it generates a precise thermoelectric millivolt (mV) signal corresponding to the active furnace temperature. Finally, the terminal block or integrated head transmitter routes this clean signal back to your PLC or furnace controller.

Key Specs

Technical Parameter Manufacturer Specification
Thermocouple Element Single or Double Type B Noble-Metal (PtRh30-PtRh6 / 30% Rhodium vs. 6% Rhodium) per EN 60584-1
Operating Temperature Range Continuous industrial furnace measurement from +600°C up to +1700°C (+1800°C short-term peak)
Ceramic Sheath Material High-purity Alumina Corundum C799 (99.7% Al₂O₃) gas-tight ceramic protection tube
Outer Sheath Diameters Standard 10 mm, 12 mm, 15 mm, 20 mm, or 24 mm ceramic tubes with metallic holding neck
Connection Head Architecture Heavy-duty cast aluminum Type AA or Type NA head with M20x1.5 cable gland entry
System Accuracy Rating Conforms strictly to EN 60584-1 Class 2 or Class 3 noble-metal tolerances

Product Models & Functional Configurations

The Limatherm TTB Series Type B thermocouple catalog offers custom-engineered builds. Moreover, it includes verified factory electronics and hazardous-area options:

  • High-Purity Corundum C799 Protection Tubes: Configured exclusively with dense 99.7% alumina Corundum C799 sheaths. Therefore, probes withstand ultra-high temperatures up to +1800°C without softening or sagging.
  • Metallic Holding Necks & Adjustable Flanges: Paired with heat-resistant steel support tubes, sliding mounting flanges, or threaded bushings. Thus, technicians set exact furnace wall immersion depths cleanly.
  • Standard Ceramic Block vs. AP Head Transmitter: Equipped with a porcelain terminal block for direct standard copper lead wiring (up to +100°C ambient), or an AP / LTT head-mounted transmitter. As a result, it converts millivolts into a noise-immune 4–20 mA or HART signal inside the head.
  • ATEX / IECEx Intrinsically Safe Versions (TTB-Exi): Certified for Zone 0, Zone 1, and Zone 20 hazardous environments when paired with approved Ex i safety barriers.

Advantages

  • Ultra-High Temperature Endurance up to +1800°C: High-rhodium Type B elements operate reliably above the upper limits of Type S and Type R thermocouples. As a result, your facility maintains uninterrupted thermal control in extreme firing zones.
  • No Expensive Compensating Cable Required: Type B thermocouples produce negligible output below +50°C. Therefore, technicians wire the connection head back to the control cabinet using standard, low-cost copper extension cables instead of specialized compensating wire.
  • Superior Grain-Growth & Drift Resistance: Both thermocouple legs contain rhodium (30% and 6%), preventing pure platinum grain growth at extreme temperatures. Consequently, probes resist mechanical embrittlement and calibration drift over long campaigns.
  • Gas-Tight Corundum C799 Shielding: Dense alumina walls block toxic furnace vapors and slag splashes completely. Thus, your sensors survive harsh metallurgical and glassmaking atmospheres longer.

Applications

Metallurgical, glassmaking, and advanced ceramic engineers integrate Limatherm TTB Series Type B thermocouples across extreme high-temperature systems:

  • Glass Melting Tanks & Forehearths: Monitors ultra-hot molten glass bath, crown, and throat temperatures continuously up to +1800°C.
  • Steelmaking, Soaking Pits & Vacuum Furnaces: Tracks extreme metallurgical heat-treatment, forging, and sintering chambers reliably.
  • Technical Ceramic & Refractory Kilns: Supervises high-temperature zirconia, alumina, and carbide firing kilns with minimal signal drift.
  • High-Temperature Gasifiers & Thermal Oxidizers: Delivers durable temperature feedback inside extreme combustion reactors and incinerators.
About Limatherm

Products & Features

Limatherm specializes in industrial temperature measurement and control solutions. Core Products & Services are 

  • Temperature Sensors: wired and head sensors, mineral-insulated (sheathed) RTD and Thermocouples
  • Hazardous Area Solutions: intrinsically safe (Exia) and flameproof (Exd) 
  • Accredited Laboratory: acc. to ISO/IEC 17025 standard
  • High-Temperature Patent:  up to 2300°C
  • Material Diversity: acid-resistant steel, borosilicate glass, ceramics (e.g., Hexoloy)

Key Benefits

  • Reliability in Extreme Environments: Suitable for high-temperature and harsh conditions (e.g., molten metal, acidic environments).
  • Adaptability: Suitable for diverse industries such as metallurgy, chemical processing, and food production.
  • Easy Installation: Features like replaceable inserts and flexible mineral-insulated cables reduce maintenance time and cost.