TTS Series Type S High-Temperature Ceramic Thermocouples Platinum Rhodium

Measure extreme industrial furnace and kiln temperatures up to +1600°C with noble-metal precision. Therefore, metallurgical engineers, glass manufacturers, and ceramic plant operators deploy Limatherm TTS Series Type S thermocouples. Specifically, they rely on these platinum-rhodium (PtRh10-Pt) sensors where standard base-metal thermocouples oxidize or drift rapidly. Because the TTS Series houses noble-metal wires inside gas-tight ceramic protection tubes, it blocks toxic furnace gases and metallic vapors completely. Furthermore, its rugged aluminum connection head shields internal wiring cleanly. Consequently, your facility prevents premature sensor failure. As a result, you maintain accurate, drift-free thermal control across continuous high-heat production lines.

Description

Description

Product Types

The Limatherm TTS Series Type S thermocouple platform maps into distinct mechanical builds and ceramic protection sheaths. Thus, you can match your exact furnace temperature and thermal shock requirements:

  • TTS Single-Tube Ceramic Series (e.g., TTSC-22): Outfitted with a single gas-tight Mullite C610 or Corundum C799 sheath. Therefore, it provides rapid thermal response and reliable high-heat tracking up to +1600°C.
  • TTS Double-Tube Ceramic Series (e.g., TTSC-42): Engineered with an inner gas-tight ceramic capillary tube plus a heavy-duty outer protective ceramic sheath. Consequently, it delivers maximum mechanical strength and vapor resistance in turbulent furnaces.
  • TTS Platinum-Coated Series (e.g., TTSC-ACT): Built with a Corundum C799 sheath coated in an outer platinum-rhodium barrier. Thus, it resists molten glass erosion and corrosive alkaline vapors completely.

Working Principle

The sensor operates continuously using a noble-metal Type S (PtRh10-Pt) thermocouple junction insulated inside ceramic capillaries and shielded by a gas-tight outer ceramic tube. First, intense radiant and convective heat inside the furnace transfers through the Mullite C610 or Corundum C799 protection sheath. Because dense ceramic walls block reducing atmospheres, sulfur compounds, and metallic vapors, the delicate platinum wires remain uncontaminated. Next, the PtRh10-Pt measuring junction captures extreme temperature shifts immediately. Thus, it generates a precise thermoelectric millivolt (mV) signal corresponding to the active furnace temperature. Finally, the terminal block or integrated head transmitter routes this clean signal back to your PLC or furnace controller.

Key Specs

Technical Parameter Manufacturer Specification
Thermocouple Element Single or Double Type S Noble-Metal (PtRh10-Pt / 90% Platinum, 10% Rhodium) per EN 60584-1
Operating Temperature Range Continuous industrial furnace measurement from 0°C up to +1600°C
Ceramic Sheath Materials Gas-tight Mullite C610 (up to +1500°C) or high-purity Alumina Corundum C799 (up to +1600°C)
Outer Sheath Diameters Standard 10 mm, 12 mm, 15 mm, 20 mm, or 24 mm ceramic tubes with metallic holding neck
Connection Head Architecture Heavy-duty cast aluminum Type AA or Type NA head with M20x1.5 cable gland entry
System Accuracy Rating Conforms strictly to EN 60584-1 Class 1 or Class 2 noble-metal tolerances

Product Models & Functional Configurations

The Limatherm TTS Series Type S thermocouple catalog offers custom-engineered builds. Moreover, it includes verified factory electronics and hazardous-area options:

  • Mullite C610 vs. Corundum C799 Protection Tubes: Configured with Mullite C610 sheaths for superior thermal shock resistance up to +1500°C, or high-purity Corundum C799 (99.7% Al₂O₃) sheaths for continuous operation up to +1600°C.
  • Metallic Holding Necks & Adjustable Flanges: Paired with heat-resistant steel support tubes, sliding mounting flanges, or threaded bushings. Thus, technicians set exact furnace wall immersion depths cleanly.
  • Standard Ceramic Block vs. AP Head Transmitter: Equipped with a porcelain terminal block for direct compensating cable wiring, or an AP / LTT head-mounted transmitter. As a result, it converts millivolts into a noise-immune 4–20 mA or HART signal inside the head.
  • ATEX / IECEx Intrinsically Safe Versions (TTS-Exi): Certified for Zone 0, Zone 1, and Zone 20 hazardous environments when paired with approved Ex i safety barriers.

Advantages

  • Extreme Temperature Endurance up to +1600°C: Platinum-rhodium Type S elements operate continuously where base-metal Type K or Type N thermocouples melt or oxidize. As a result, your facility maintains stable high-heat control.
  • Gas-Tight Ceramic Contamination Shielding: Dense Mullite C610 and Corundum C799 tubes block reducing gases and metallic vapors from poisoning the noble-metal wires. Therefore, you prevent calibration drift and extend sensor service life.
  • High Calibration Accuracy & Repeatability: Type S thermocouples serve as international high-temperature reference standards under EN 60584-1. Consequently, your thermal processes achieve strict quality compliance.
  • Spacious Type AA Connection Head: The robust aluminum housing offers generous internal clearance. Thus, technicians install double-element terminal blocks or 4–20 mA transmitters effortlessly.

Applications

Metallurgical, glassmaking, and ceramic engineers integrate Limatherm TTS Series Type S thermocouples across extreme high-temperature systems:

  • Glass Melting Tanks & Forehearths: Monitors molten glass bath, crown, and regenerator temperatures continuously up to +1600°C.
  • Ceramic, Brick & Cement Kilns: Tracks high-temperature sintering and firing zones in tunnel, shuttle, and rotary kilns reliably.
  • Steelmaking & Heat Treatment Furnaces: Supervises annealing, forging, and soaking pit atmospheres with long-term drift-free accuracy.
  • Chemical Thermal Oxidizers & Incinerators: Delivers durable temperature feedback inside high-heat combustion chambers and catalytic reactors.
About Limatherm

Products & Features

Limatherm specializes in industrial temperature measurement and control solutions. Core Products & Services are 

  • Temperature Sensors: wired and head sensors, mineral-insulated (sheathed) RTD and Thermocouples
  • Hazardous Area Solutions: intrinsically safe (Exia) and flameproof (Exd) 
  • Accredited Laboratory: acc. to ISO/IEC 17025 standard
  • High-Temperature Patent:  up to 2300°C
  • Material Diversity: acid-resistant steel, borosilicate glass, ceramics (e.g., Hexoloy)

Key Benefits

  • Reliability in Extreme Environments: Suitable for high-temperature and harsh conditions (e.g., molten metal, acidic environments).
  • Adaptability: Suitable for diverse industries such as metallurgy, chemical processing, and food production.
  • Easy Installation: Features like replaceable inserts and flexible mineral-insulated cables reduce maintenance time and cost.