SSEA-TFGIII Gas Turbine Flow Meter

The SSEA-TFGIII Gas Turbine Flow Meter for industrial gas flow measurement and consumption monitoring is designed to measure gas flow in compatible industrial pipeline systems. It uses a rotating turbine rotor to convert gas movement into a measurable signal. As a result, the meter supports gas consumption monitoring, flow measurement, and industrial process management.

Gas turbine flow meters are commonly used for clean gases in applications such as natural gas distribution and industrial gas supply. Moreover, a suitable electronic transmitter can process the turbine signal to calculate flow rate and accumulated gas volume. Before selecting the SSEA-TFGIII, however, users should confirm the manufacturer’s specifications for gas type, pressure, temperature, and flow range.

SKU: SSEA TFIII Categories: ,
Description

Description

Models  SSEA-TFGIII Gas Turbine Flow Meter

Key Features

  • Turbine-based measurement: Uses a rotating rotor to measure gas flow in compatible pipelines.
  • Continuous flow monitoring: Supports measurement of gas flow rate during operation.
  • Volumetric measurement: Can support accumulated gas volume measurement when paired with a compatible totalizer.
  • Industrial pipeline applications: Designed for gas flow measurement in suitable process systems.
  • Electronic signal processing: A compatible pickup and transmitter can convert rotor movement into a usable flow signal.
  • System integration: Confirm available pulse, analog, or communication outputs for the selected model.

Working Principle

The SSEA-TFGIII uses the turbine flow measurement principle. As gas enters the meter, the flowing gas transfers energy to the turbine blades and causes the rotor to spin. Within the meter’s specified operating range, rotor speed corresponds to the gas velocity.

A compatible pickup detects the rotor’s movement and generates a signal. The electronic unit then processes this signal using the meter’s calibration factor to calculate the gas flow rate. In addition, a compatible totalizer can accumulate the measured volume over time.

Gas volume changes with pressure and temperature. Therefore, applications that require standard or corrected gas volume may need additional pressure and temperature measurements, together with a suitable flow computer or compensation function. Confirm whether these features are included in the selected SSEA-TFGIII configuration.

Technical Specifications

  • Manufacturer: Schmierer SEA
  • Model: SSEA-TFGIII
  • Product type: Gas turbine flow meter
  • Measurement principle: Turbine-based gas flow measurement
  • Measuring medium: Compatible gases; confirm the permitted gas composition with the manufacturer
  • Nominal diameter: Confirm with the manufacturer
  • Flow range: Confirm with the manufacturer
  • Accuracy: Confirm with the manufacturer
  • Repeatability: Confirm with the manufacturer
  • Maximum operating pressure: Confirm with the manufacturer
  • Operating temperature: Confirm with the manufacturer
  • Body and rotor materials: Confirm with the manufacturer
  • Output signals: Confirm pulse, 4–20 mA, or communication options for the selected version
  • Pressure and temperature compensation: Confirm availability for the selected configuration
  • Process connection: Confirm with the manufacturer

Applications

  • Natural gas systems: Measures gas flow in compatible supply and distribution pipelines.
  • Industrial gas distribution: Supports monitoring of suitable gases supplied to production equipment.
  • Boiler and burner systems: Can support gas consumption monitoring where the meter’s certified operating limits meet the installation requirements.
  • Manufacturing plants: Helps track gas usage across compatible process lines.
  • Energy management: Provides flow data for gas consumption reporting when connected to a suitable monitoring system.
  • Industrial utilities: Supports gas flow monitoring in compatible utility networks.

Benefits of the SSEA-TFGIII Gas Turbine Flow Meter

Responsive flow measurement: The turbine rotor responds to gas movement, allowing the meter to track flow changes within its specified operating range.

Gas consumption monitoring: When connected to a compatible totalizer or control system, the meter can help operators track accumulated gas volume.

Automation compatibility: Suitable signal outputs can allow integration with PLCs, SCADA systems, or flow computers. Verify the actual outputs before selecting the meter.

Support for energy management: Reliable gas flow data helps plants analyze consumption, compare operating demand, and improve process visibility.

Application-specific configuration: Confirming the gas composition, flow range, and operating conditions helps users select a meter that matches the process requirements.

About SSEA

SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.

SSEA instruments by family

FamilySSEA productsStated figures
Pressure gaugesSRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gaugeSRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial
Test pressure gaugesSRU15 test gauge, SFU 15, SF 15250 mm dial
Gauge accessoriesSyphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointerSee product pages
Electrical pressurePTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gaugePTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar
Pressure calibrationIDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pumpIDTG 100: -1 to 600 bar
TemperatureSTU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowellsSTU02 bimetal thermometer to EN 13190
Flow metersCMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonicSee product pages
Water qualityDigital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllersSee product pages

How to choose within the range

  • General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
  • Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
  • Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
  • A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
  • Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.

Service in Shah Alam

Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.

Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.