Showing 385–396 of 405 results

Turbine Meter RQ

In stock

SKU: RQ UST
The Bopp & Reuther RQ Turbine Meter series provides exceptional high-accuracy flow and volume measurement for low-viscosity liquids. Engineered to maintain structural integrity under extreme pressures up to PN320 and vast temperature spreads, it delivers low pressure loss and long-term calibration stability for industrial process lines and custody transfer applications.
  • Custody Transfer Approvals: Formally certified by the Physikalisch-Technische Bundesanstalt (PTB) and compliant with MID 2014/32/EU regulations for weights and measures fiscal auditing.
  • Extreme Resilience: Superior metal alloys allow the system to operate safely inside cryogenic loops (-196°C) or highly pressurized pipelines (up to 320 bar).
  • Minimal Pressure Drop: The hydrodynamically optimized axial turbine introduces very low resistance to the process stream, optimizing pumping costs across high-volume lines.
  • Smart Data Communication: Easily paired with modern electronics to supply native HART®, Modbus RTU, or 4-20mA loop diagnostics alongside raw high-frequency pulses.

UFP-1.0 Portable Clamp-On Ultrasonic Flowmeter

In stock

SKU: SSEA UFP1.0
The Schmierer SEA UFP-1.0 Portable Ultrasonic Flowmeter provides a convenient solution for checking liquid flow without cutting into or interrupting the pipeline. It uses clamp-on ultrasonic transducers to measure flow from outside the pipe. Therefore, technicians can perform flow checks without removing sections of pipe or installing an in-line meter. The UFP-1.0 supports short-term measurements, long-term monitoring, data logging, and verification of existing flowmeters. Moreover, its portable design, rechargeable lithium-ion battery, and backlit color display make it suitable for field inspections and routine maintenance. With a stated pipe size range of DN25 to DN5000, it can support flow measurement across a wide variety of pipeline sizes.

Ultrafiltration and Media Filtration Systems – ULTRATEC, FILTEC

In stock

SKU: ULTRATEC, FILTEC
Strip out suspended matter, micro-particles, and chlorine completely to guarantee crystal-clear process water. Manufacturing plants, breweries, food processing lines, and pharmaceutical facilities deploy Centec FILTEC and ULTRATEC modular skids to secure high-performance liquid purification. Because these application-specific platforms combine heavy-duty granular absorption beds with advanced hollow-fiber micro-separation barriers, they remove physical contaminants, pathogens, and unwanted organic compounds with exceptional reliability. Consequently, your processing line achieves continuous water quality standardization, protecting downstream reverse osmosis membranes and ensuring pristine finished product quality.

Unidirectional Knife Gate Valves HPZ series

In stock

SKU: HPZ
The Hiton HPZ Series Unidirectional Knife Gate Valve is an economical, high-performance wafer-style shut-off valve featuring a thin, single-piece knife-edge gate designed to slice through fluid media containing heavy fibers, fine particles, and suspended solids. It utilizes a compact, slim integral body design that maximizes flow capacity while minimizing space. Its specialized bottom-groove-free internal body design prevents particulate matter or pulp from settling and packing inside the seal path.  

UPPC Universal programmable process controller

In stock

SKU: UPPC
Achieve absolute precision, immaculate loop stability, and dynamic automation logic control across your most demanding industrial manufacturing networks. For this reason, plant automation managers, panel builders, and systems engineers deploy the Universal Programmable Process Controller UPPC series. They do this specifically to secure continuous, real-time PID algorithm optimization and multi-channel field monitoring. Because this premium multi-loop controller blends a highly flexible input matrix with universal fieldbus connectivity, it completely overcomes the hardware restrictions common to basic single-tier tracking nodes. Furthermore, it easily processes complex math calculations and automation configurations. Consequently, your production facility achieves immaculate process loops. As a result, it eliminates tracking blind spots, drops unexpected plant downtime, and guarantees absolute system safety under severe industrial environments.

VC600 Clamp-on Ultrasonic Gas Flow Sensor

In stock

SKU: VC600

Measure gas consumption without cutting a single pipe with the CS Instruments VC 600. Expertly manufactured by CS Instruments, this high-performance non-invasive clamp-on flow sensor tracks compressed air and industrial gases from the outside. Furthermore, its ultra-safe clamp architecture eliminates installation downtime, contamination threats, and costly pressure drops across your entire production plant. Watch Video

PDF Datasheet

VD500 Flow Sensor for Wet Compressed Air

In stock

SKU: VD500
The CS Instruments VD 500 Flow Sensor measures compressed air flow directly downstream of the compressor, where the air can still contain moisture and reach elevated temperatures. It is designed to measure flow, total consumption, temperature, and pressure, making it particularly useful for compressor performance analysis and compressed air energy audits. Unlike thermal mass flow sensors intended for dry compressed air, the VD 500 uses a differential-pressure measurement principle. Its robust design supports high flow velocities and temperatures up to 180°C. In addition, the sensor can be installed through a ½-inch ball valve under pressure, reducing the need to shut down the system for installation when the correct fittings and safety procedures are used.

Videographic recorder Field Logger USB

In stock

SKU: Fieldlogger USB
Field Loggeris a compact videographic recorder with analogue and digital inputs. 24 bit A/D converter allows reaching high resolution and operating speed even to 1000 samples per second. It has 8 programmable inputs, suitable for thermocouple sensors, RTD sensors and current and voltage signals. It has two alarm relays and 8 additional channels programmable individually as inputs or outputs. The recorder can have 128 virtual channels according to mathematical and logical functions, and 32 alarm events that can activate outputs, send messages in form of e-mails or control the process of recording. Field Logger has two USB interfaces – one for configuration via PC and the other for data downloading from the flash memory. Data are registered on inner memory 512kB or on SD card slot suitable for cards up to 16GB. Recording on PC is realized via RS485 interface (master/slave) operating in Modbus RTU or Ethernet 10/100Mbps, which enables an access to recorder via WWW (HTTP) web browser, FTP (client and server), SMTP (e-mail sending), SNMP and Modbus TCP. download PDF

Vortex Meter VTX2 HART

In stock

SKU: VTX2
The VTX vortex meter is used for flow and volumetric measurements of conductive and non-conductive fluids, gases and vapours in all industrial branches.

Vortex Meter VTX3 Ex, SIL2/3 certified

In stock

SKU: VTX3
The VTX vortex meter is used for flow and volumetric measurements of conductive and non-conductive fluids, gases, vapours, saturated and superheated steam in all industrial branches: integrated pressure & temperature compensation - heat quantity measurement of steam and hot water - consumption measurement in compressed air networks download pdf datasheet

Wafer Segment Ball Valve

In stock

SKU: VQD, VQF
The Hiton wafer segment ball valve (VQD Series) is a compact, high-performance quarter-turn control valve featuring a V-notch ball designed for precise flow throttling and shearing action against fibrous slurries, pulp, and suspended particles. The Hiton wafer V-port segment ball valve provides high flow capacity and tight shut-off via an integral wafer body configuration that fits securely between pipe flanges.

WATERSENS Water Flood Detector & Level Warning Sensor

In stock

SKU: Watersens
Secure your facility against devastating liquid damage, structural flooding, and critical reservoir failures. Commercial property managers, automation technicians, and plant engineers deploy the Ensim WATERSENS series to achieve high-performance early leak detection and level warning control. Because this highly sensitive electronic switch triggers instantly when fluid interfaces complete its specialized non-electrolysis circuit path, it completely eliminates tracking delays common to slower mechanical floats. Consequently, your facility gains continuous, worry-free flood mitigation that can immediately shut down upstream solenoid water valves or sound alarms before costly property loss occurs.