Massflow Transm. RHE 14 - DIN Rail Mount
Massflow Transm. RHE 14 - DIN Rail Mount
Back to products
Massflow Transm. RHE 16 - Enhanced Rail Mount
Massflow Transm. RHE 16 - Enhanced Rail Mount
Click to enlarge
Rheonik

Massflow Transm. RHE 15 – PROFIBUS DP Module

The RHE15 is an expansion module providing connectivity for an RHE14 transmitter to a PROFIBUS-DP system. The unit can optionally act as a gateway for other local instruments without PROFIBUS functionality.

PDF datasheet

4 People watching this product now!
SKU: RHE 15 Categories: ,
Description

Description

FUNCTIONS PROFIBUS-DP Connectivity for RHE 14
 Conversion of three Analog and one Pulse Input from any Transmitter to PROFIBUS
About Rheonik
More Information
Custody-Transfer-MID-H2-Coriolis_RHM-RHE
Hydrogen
Omegaflowmeterrange
Omega
Omegadescription
Omegadesign
chemicalinjectionoffshore
H2injection
H2trailerunloading

    Products & Features

    Rheonik Coriolis mass flow meters use a unique, patented "Omega" tube design with torsion rods and mass bars to directly measure mass flow, density, and temperature with high accuracy for gases and liquids.

    • Omega Tube Design: The distinctive "omega" shape of the measuring tubes is optimized for torsion, enhancing sensitivity and mechanical reliability.
    • Coriolis Force Measurement: Driven by electromagnetic coils, the tubes oscillate. As fluid flows through, the Coriolis force deflects the tubes, creating a phase shift (time delay) between the sensors, which is directly proportional to mass flow.

    Key Benefits:

    • High-Pressure & High-Temperature Capability: Designed to operate under extreme conditions (e.g., -200°C to 400°C and 900+ bar).
    • Versatile Applications: Suitable for liquids, sludge, and gases. 
    • High Accuracy: Suitable for custody transfer (OIML/NTEP).
    • Robustness: Excellent performance with entrained gas and high-viscosity materials.
    • Wide Rangeability: 100:1 turndown ratio is common.

    Related products

    Quick view

    Flap Flowmeter KFS spring loaded

    In stock

    SKU: KFS Flap
    The KFS spring loaded measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated to customer requirement and fitted with a product-specific scale. The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle. The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer. download pdf datasheet
    Quick view

    Massflow Sensor RHM015 small size 0.0015 – 0.6 kg/min

    In stock

    SKU: RHM015
    The RHM015 is perfect for extremely low flow applications where stability and accuracy are a must. With an application range starting at a few grams a minute, the RHM015L fits R&D and small pilot requirements. PDF datasheet
    Quick view

    Massflow Sensor RHM04 small size 0.05 – 10 kg/min

    In stock

    SKU: RHM04
    The RHM04 is a fast response solution for batching, dispensing and filling applications. Very high pressure ratings allow deployment in processes where Coriolis meter use has not been possible in the past. PDF datasheet
    Quick view

    VA Flowmeter RA65/FA65 protective steel tube

    In stock

    SKU: RA65/FA65
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 65 and FA 65 are based on the variable area float principle. In pipelines the RA 65 is installed by means of pipe unions and the FA 65 is mounted between flanges. The borosilicate glass measuring cone is located inside a protection steel tube with an inspection window. VA flow meters RA 65 and FA 65 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 65 and FA 65 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter. download pdf datasheet
    Quick view

    VA Flowmeter RA77/FA77 plastic tube – glass cone

    In stock

    SKU: RA77/FA77
    VA Flowmeter with plastic armature and borosilicate glass measuring cone Measuring units RA 77 and FA 77 are based on the variable area float principle. The flow meter consist of a PVC armature with a measuring cone made of borosilicate glass. With these design features the RA 77 / FA 77 devices combine the advantages of the classical VA flow meters with those of pure plastic measuring devices: Cost-effective, resistant against almost all aggressive media, as well as a high accuracy of the measuring glass, which can be calibrated to suit any requirement. Especially with water and aggressive media this design has proven itself. Therefore the RA 77 / FA 77 are frequently used in the chemical industry and in water treatment plants. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. download pdf datasheet
    Quick view

    VA Flowmeter SGM

    In stock

    SKU: SGM VA
    VA Flow Meter for high temperature & pressure, chemical applications In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow in pipelines, the SGM is the obvious choice as a reliable device for measuring the flow of liquids and gases. Since the vertical position of the float is transmitted magnetically to a dial gauge, the SGM, as opposed to standard type variable area flow meters with a glass tube, is also suitable for measuring the flow of opaque media. Each device is individually calibrated to meet customer specifics and fitted with a medium specific scale. download pdf datasheet
    Quick view

    VA Flowmeter SKT/SKT/SKPVC plastic cone

    In stock

    SKU: SKT/SKT/SKPVC
    Plastic Cone VA Flow Meter for cost effective Measurement The plastic flow meters SKT, SKP and SKPVC are based on the variable area float principle. The flowrate is indicated on a scale printed on the measuring tube by the indicator edge of the float. The indicator edge is identical with the largest diameter of the float. The standard scale has been designed in l/h and in % for the medium water (20 °C) and has two adjustable nominal value indications. Special scales for other substances are available on request. download pdf datasheet
    Quick view

    Vortex Flow Meter

    In stock

    SKU: SSEA VF
    The VF Vortex Flowmeter measures the volumetric flow of fluids (gases, vapors, liquids) in closed pipes. It is based on the Vortex shedding principle, (or Karman Vortex Effect). The fluid passing through the measuring tube is separated by a triangular prism with a broad flat front and generates two lines of eddies or vortices, the Karman Vortex shedding street. The vortex shedding frequency is proportional to the flow rate.It is detected by a sensor with 4 piezo-electric elements and converted into an electronic output signal. High quality and safety standards: no moving wear off parts inside, no abrasion fully welded SS304 body (opt. SS316) Japanese OVAL technology and design embedded sensor Digital Circuit Board for anti vibration and anti interference Easy installation and flow conversion, (w. pressure and temp. compensation) download pdf datasheet