Electro Magnetic Flow Meter SSEAMFII
Electro Magnetic Flow Meter SSEAMFII
Back to products
Massflow Sensor RHM02 small size 0.02 - 2 kg/min
Massflow Sensor RHM02 small size 0.02 - 2 kg/min
Click to enlarge
Rheonik

Massflow Sensor RHM015 small size 0.0015 – 0.6 kg/min

The RHM015 is perfect for extremely low flow applications where stability and accuracy are a must. With an application range starting at a few grams a minute, the RHM015L fits R&D and small pilot requirements.

PDF datasheet

6 People watching this product now!
SKU: RHM015 Categories: ,
Description

Description

TYPICAL APPLICATION RANGE 0.0015 up to 0.6 kg/min
MAX. PRESSURE 1592 bar / 23090 psi
TEMPERATURE -196 up to +350°C
ACCURACY 0.1% of rate
MATERIALS 904L
316Ti
Alloy C22
Tantalum
more on request
PROCESS CONNECTIONS 1/16″ up to 1″
About Rheonik
More Information
Custody-Transfer-MID-H2-Coriolis_RHM-RHE
Hydrogen
Omegaflowmeterrange
Omega
Omegadescription
Omegadesign
chemicalinjectionoffshore
H2injection
H2trailerunloading

    Products & Features

    Rheonik Coriolis mass flow meters use a unique, patented "Omega" tube design with torsion rods and mass bars to directly measure mass flow, density, and temperature with high accuracy for gases and liquids.

    • Omega Tube Design: The distinctive "omega" shape of the measuring tubes is optimized for torsion, enhancing sensitivity and mechanical reliability.
    • Coriolis Force Measurement: Driven by electromagnetic coils, the tubes oscillate. As fluid flows through, the Coriolis force deflects the tubes, creating a phase shift (time delay) between the sensors, which is directly proportional to mass flow.

    Key Benefits:

    • High-Pressure & High-Temperature Capability: Designed to operate under extreme conditions (e.g., -200°C to 400°C and 900+ bar).
    • Versatile Applications: Suitable for liquids, sludge, and gases. 
    • High Accuracy: Suitable for custody transfer (OIML/NTEP).
    • Robustness: Excellent performance with entrained gas and high-viscosity materials.
    • Wide Rangeability: 100:1 turndown ratio is common.

    Related products
    Quick view

    Itabar Pitot Tube Steam Flow

    In stock

    SKU: Itabar ibrd-ibfd-ftmd-fthd
    The ITABAR Steam Sensors are designed to measure saturated and superheated steam in all areas of power generation and industrial and process technologies. Flowsensors for fixed installation: IBRF series with threaded connection IBFD series with flanged connection IBFD HT series with flanged connection for superheated steam IBFD HTG series with complete welded construction for superheated steam Flotap Sensors for installation under pressure: FTMD series with threaded connection FTHD series with flanged connection and guided rod spindle download pdf datasheet
    Quick view

    Massflow Sensor RHM03 small size 0.038 – 5 kg/min

    In stock

    SKU: RHM03
    The RHM03 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must. PDF datasheet
    Quick view

    Massflow Sensor RHM12 middle size 0.75 – 100 kg/min

    In stock

    SKU: RHM12
    The RHM12 is a workhorse 1″ sensor used in every imaginable industry. Suitable for both continuous process and batching/filling applications, the RHM12 is a truly versatile tool for plant operations everywhere. PDF datasheet
    Quick view

    Thermal Gasflow Meter

    In stock

    SKU: Thermal Flow TA
    Fixed and portable consumption measurement in compressed air, nitrogen, natural gas, methane, helium, argon, carbon dioxide, hydrogen, SF6; measuring laminar flow, burner supply air, leakage flows; monitoring safety-related installations, also in aeronautical applications. - for use in air, compressed air, nitrogen, natural gas, methane, deposit gas, argon, helium, propane, butane, CO2, SF6 - probe for pipeline installation from Di 25 mm, measuring tube from Di 8 mm - measurement of gas mass flow - standard flow velocity 0.08 m/s to 200 m/s, volume flow up to 0.04 m3/h - time constant of under 1 s - for applications in Ex areas - M-Bus, WLAN
    Quick view

    VA Flowmeter RA60/FA60 protective steel tube

    In stock

    SKU: RA60/FA60
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 60 and FA 60 are based on the variable area float principle. In pipelines the RA 60 is installed by means of pipe unions and the FA 60 is mounted between flanges. The borosilicate glass measuring cone is located inside a protective steel tube with an inspection window. VA flow meters RA 60 and FA 60 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 60 and FA 60 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. download pdf datasheet
    Quick view

    VA Flowmeter RA65/FA65 protective steel tube

    In stock

    SKU: RA65/FA65
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 65 and FA 65 are based on the variable area float principle. In pipelines the RA 65 is installed by means of pipe unions and the FA 65 is mounted between flanges. The borosilicate glass measuring cone is located inside a protection steel tube with an inspection window. VA flow meters RA 65 and FA 65 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 65 and FA 65 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter. download pdf datasheet
    Quick view

    VA Flowmeter SGA NBR lining

    In stock

    SKU: SGA
    VA Flow Meter with NBR-lining for acids, alkaline solutions and aggressive gases The measuring unit SGA is based on the variable area float principle. Wherever a robust and reliable device for the indication of momentary values and the monitoring of flows in pipelines is required in plant engineering, the SGA is the right choice as a reliable unit for the measurement of liquids and gases. This flow meter is available in a variety of cast iron versions for the application with various media and pressures. The measuring range for H2O is 0.012 - 0.12 m3/h to 12 - 120 m3/h, the measuring range for gas is 0.15 - 1.5 to 100 - 1000 m3/h air at STP. Each unit is calibrated to meet the requirements of the respective customer and is fitted with a scale specific for the media to be measured. download pdf datasheet
    Quick view

    VA Flowmeter SGM PP/PVC

    In stock

    SKU: SGM VA PP/PVC
    The SGM PP/PVC VA Flow meter is a cost effective fully plastic Version - for chemical applications with highly acidic media, e.g. hydrochloric acid. Since the vertical position of the float is transmitted magnetically to a dial gauge, the SGM, as opposed to standard type variable area flow meters with a glass tube, is also suitable for measuring the flow of opaque media. Each device is individually calibrated to meet customer specifics and fitted with a medium specific scale. download pdf datasheet