Massflow Transm. RHE12 – Exd field mount in Alu
Massflow Transm. RHE12 – Exd field mount in Alu
Back to products
Massflow Transm. RHE 15 - PROFIBUS DP Module
Massflow Transm. RHE 15 - PROFIBUS DP Module
Click to enlarge
Rheonik

Massflow Transm. RHE 14 – DIN Rail Mount

The RHE14 is a low cost mass flow transmitter ideal for OEM and embedded system use. The RHE14 is DIN rail mount and configured through a native RS232 data port. The RHE14 can be used with all RHM Coriolis Sensors.

PDF datasheet

5 People watching this product now!
SKU: RHE 14 Categories: ,
Description

Description

MEASUREMENTS Mass Flow
Temperature
OUTPUTS 1 Analog
1 Pulse / Frequency
2 Digital
INPUTS 1 Remote Zero
INTERFACES RS 232
HART
About Rheonik
More Information
Custody-Transfer-MID-H2-Coriolis_RHM-RHE
Hydrogen
Omegaflowmeterrange
Omega
Omegadescription
Omegadesign
chemicalinjectionoffshore
H2injection
H2trailerunloading

    Products & Features

    Rheonik Coriolis mass flow meters use a unique, patented "Omega" tube design with torsion rods and mass bars to directly measure mass flow, density, and temperature with high accuracy for gases and liquids.

    • Omega Tube Design: The distinctive "omega" shape of the measuring tubes is optimized for torsion, enhancing sensitivity and mechanical reliability.
    • Coriolis Force Measurement: Driven by electromagnetic coils, the tubes oscillate. As fluid flows through, the Coriolis force deflects the tubes, creating a phase shift (time delay) between the sensors, which is directly proportional to mass flow.

    Key Benefits:

    • High-Pressure & High-Temperature Capability: Designed to operate under extreme conditions (e.g., -200°C to 400°C and 900+ bar).
    • Versatile Applications: Suitable for liquids, sludge, and gases. 
    • High Accuracy: Suitable for custody transfer (OIML/NTEP).
    • Robustness: Excellent performance with entrained gas and high-viscosity materials.
    • Wide Rangeability: 100:1 turndown ratio is common.

    Related products

    Quick view

    Flap Flowmeter KFS spring loaded

    In stock

    SKU: KFS Flap
    The KFS spring loaded measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated to customer requirement and fitted with a product-specific scale. The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle. The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer. download pdf datasheet
    Quick view

    Flap Flowmeter KLA

    In stock

    SKU: KLA Flap
    The KLA Flowmeter uses a flap which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow through the pipe. The flap is gravity-loaded, thus the device can be used for the flow directions left to right, right to left and bottom to top. In the variant KLA-GS the medium be measured is directly visible through a glass in the flow indication unit. download pdf datasheet
    Quick view

    Thermal Gasflow Meter

    In stock

    SKU: Thermal Flow TA
    Fixed and portable consumption measurement in compressed air, nitrogen, natural gas, methane, helium, argon, carbon dioxide, hydrogen, SF6; measuring laminar flow, burner supply air, leakage flows; monitoring safety-related installations, also in aeronautical applications. - for use in air, compressed air, nitrogen, natural gas, methane, deposit gas, argon, helium, propane, butane, CO2, SF6 - probe for pipeline installation from Di 25 mm, measuring tube from Di 8 mm - measurement of gas mass flow - standard flow velocity 0.08 m/s to 200 m/s, volume flow up to 0.04 m3/h - time constant of under 1 s - for applications in Ex areas - M-Bus, WLAN
    Quick view

    VA Flowmeter RA65/FA65 protective steel tube

    In stock

    SKU: RA65/FA65
    VA Flow Meter with protective steel tube and borosilicate measuring cone The measuring units RA 65 and FA 65 are based on the variable area float principle. In pipelines the RA 65 is installed by means of pipe unions and the FA 65 is mounted between flanges. The borosilicate glass measuring cone is located inside a protection steel tube with an inspection window. VA flow meters RA 65 and FA 65 are most suitable for the flow measurement of transparent fluids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 65 and FA 65 are used e.g. in plant and process engineering. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter. download pdf datasheet
    Quick view

    VA Flowmeter RA87/FA87 stainless steel tube

    In stock

    SKU: RA87/FA87
    VA Flowmeter with armature completely made of stainless steel Measuring units RA 87 and FA 87 are based on the variable area float principle. In pipelines the RA 87 is installed by means of pipe unions and the FA 87 is mounted between flanges. The borosilicate glass measuring cone is located inside a protective stainless steel tube with an inspection window. All parts in contact with the measured medium are made of stainless steel 1.4571. VA flow meters RA 87 and FA 87 are most suitable for the flow measurement of transparent liquids and gases. Each unit is customized with a scale specific for the medium to be measured. RA 87 and FA 87 are mainly used in the chemical industry, in water treatment plants, in the food industry, and in other plant engineering applications. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. By installing an linear displacement sensor an output signal can be generated which is proportional to the height setting of the flow meter. download pdf datasheet
    Quick view

    VA Flowmeter SGA NBR lining

    In stock

    SKU: SGA
    VA Flow Meter with NBR-lining for acids, alkaline solutions and aggressive gases The measuring unit SGA is based on the variable area float principle. Wherever a robust and reliable device for the indication of momentary values and the monitoring of flows in pipelines is required in plant engineering, the SGA is the right choice as a reliable unit for the measurement of liquids and gases. This flow meter is available in a variety of cast iron versions for the application with various media and pressures. The measuring range for H2O is 0.012 - 0.12 m3/h to 12 - 120 m3/h, the measuring range for gas is 0.15 - 1.5 to 100 - 1000 m3/h air at STP. Each unit is calibrated to meet the requirements of the respective customer and is fitted with a scale specific for the media to be measured. download pdf datasheet
    Quick view

    VA Flowmeter SGM PP/PVC

    In stock

    SKU: SGM VA PP/PVC
    The SGM PP/PVC VA Flow meter is a cost effective fully plastic Version - for chemical applications with highly acidic media, e.g. hydrochloric acid. Since the vertical position of the float is transmitted magnetically to a dial gauge, the SGM, as opposed to standard type variable area flow meters with a glass tube, is also suitable for measuring the flow of opaque media. Each device is individually calibrated to meet customer specifics and fitted with a medium specific scale. download pdf datasheet
    Quick view

    Vane Gasflow Anemometer Meter insertion type

    In stock

    SKU: Vane Flow insertion FA
    Flow rate and flow velocity in pipes and ducts, measuring flow profiles, aerodynamic research, measuring laminar flow, also at high gas temperatures, landfill gas, exhaust gas, flow rate and flow velocity in flowing waters. download pdf datasheet