HVAC Duct & Air Ventilation Temperature Sensors

Measure air and gas temperatures accurately inside ventilation ducts and air handling units (AHUs) with insertion duct probes. Therefore, HVAC contractors, building automation integrators, and cleanroom engineers deploy Limatherm TOPK-851 and TONK-851 duct sensors. Specifically, they rely on these stainless steel insertion probes for continuous supply, return, and exhaust air monitoring. Because these models combine precision platinum or nickel resistance elements with adjustable mounting flanges, they position the sensing tip directly inside the center airflow stream. Furthermore, their IP65 polycarbonate terminal boxes protect wiring against duct condensation. Consequently, your building management system (BMS) regulates dampers and coils precisely. As a result, you optimize indoor climate comfort while reducing HVAC energy consumption.

SKU: TOPK-851, TONK-851 Categories: ,
Description

Description

Product Types

The Limatherm TOPK-851 and TONK-851 duct sensor platform maps into two core sensing element families and tailored probe lengths. Thus, you can match your exact BMS controller input and duct width:

  • TOPK-851 (Platinum RTD Duct Sensors): Outfitted with high-purity Pt100 or Pt1000 elements per EN 60751. Therefore, they deliver high measurement accuracy and long-term stability across modern commercial HVAC systems.
  • TONK-851 (Nickel RTD Duct Sensors): Engineered with Ni100 or Ni1000 elements per DIN 43760. Consequently, they integrate seamlessly into legacy and European building automation controllers requiring higher temperature coefficients.
  • Custom Immersion Lengths (100 mm to 400+ mm): Available in multiple stainless steel stem lengths. Thus, technicians reach the center airflow profile inside both narrow branches and large insulated AHU trunks.

Working Principle

The sensor operates continuously by exposing a slim stainless steel probe tube directly to moving air or non-aggressive gases inside a ventilation channel. First, the adjustable mounting flange secures the probe through the duct wall so the sensing tip sits squarely in the active airstream. Next, convective heat from the moving air transfers rapidly through the thin metal sheath to the internal platinum (TOPK-851) or nickel (TONK-851) resistor. Thus, the element generates a predictable, linear change in electrical resistance corresponding to the active duct temperature. Finally, the internal screw terminal block or optional active transmitter routes this clean signal directly to your BMS, thermostat, or PLC.

Key Specs

Technical Parameter Manufacturer Specification
Sensing Elements TOPK-851: Pt100 or Pt1000 (EN 60751) / TONK-851: Ni100 or Ni1000 (DIN 43760)
Operating Temperature Range Ventilation & Air Handling Spectrum: -50°C up to +150°C (probe) / -40°C to +80°C (housing)
Probe Tube Construction Corrosion-resistant AISI 321 / 316L Stainless Steel sheath (standard Ø 6 mm diameter)
Standard Insertion Lengths 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, or 400 mm (custom lengths available)
Enclosure & Ingress Protection Impact-resistant IP65 Polycarbonate terminal box with PG / M16 waterproof cable gland
Signal Output Options Direct passive 2-wire, 3-wire, or 4-wire RTD resistance, or active 4–20 mA / 0–10 V output

Product Models & Functional Configurations

The Limatherm TOPK-851 and TONK-851 duct sensor catalog offers tailored HVAC installation builds. Moreover, it includes verified factory output and mounting options:

  • Adjustable Sliding Mounting Flange: Supplied with a movable plastic or metal duct flange. Consequently, installers adjust the exact immersion depth on site to clear thick exterior duct insulation cleanly.
  • Pt100 / Pt1000 vs. Ni100 / Ni1000 Elements: Configured with Pt1000 or Ni1000 elements to eliminate lead-wire resistance errors over long 2-wire building runs, or Pt100 elements for high-precision 3-wire and 4-wire PLC loops.
  • Passive Resistance vs. Active Transmitter Outputs: Available as direct passive RTD sensors for standard HVAC controllers, or outfitted with integrated 4–20 mA or 0–10 V signal conditioners inside the terminal box.
  • IP65 Moisture-Sealed Terminal Box: Features a gasketed lid and waterproof cable gland. As a result, high humidity and condensation around chilled-air ducts never damage internal wiring terminals.

Advantages

  • Fast Response to Airflow Temperature Changes: Slim 6 mm stainless steel probe tubes react quickly to moving supply and exhaust air shifts. As a result, heating coils, chilled water valves, and mixing dampers respond without thermal lag.
  • Flexible Immersion Depth Adjustment: Included sliding mounting flanges let technicians position the tip at the true duct centerline regardless of wall thickness or insulation layers.
  • Universal BMS & HVAC Controller Compatibility: Offering both platinum (TOPK-851) and nickel (TONK-851) elements ensures plug-and-play compatibility with Siemens, Honeywell, Johnson Controls, and standard PLC inputs.
  • Rugged IP65 Condensation Protection: Sealed polycarbonate enclosures prevent moisture ingress and terminal corrosion in cold air-conditioning ducts and humid mechanical rooms.

Applications

HVAC engineers, building integrators, and facility managers deploy Limatherm TOPK-851 and TONK-851 duct sensors across commercial and industrial ventilation systems:

  • Air Handling Units (AHUs) & Rooftop Units: Monitors outside air intake, mixed air, pre-heat, cooling coil discharge, and supply air temperatures continuously.
  • Supply & Exhaust Ventilation Ducts: Tracks zone duct temperatures to control VAV terminal boxes, heat-recovery wheels, and economizer dampers efficiently.
  • Commercial Buildings, Malls & Data Centers: Maintains strict thermal balance across high-volume air distribution trunks to protect equipment and occupant comfort.
  • Industrial Drying Ovens & Process Air Lines: Supervises warm process airflows up to +150°C with durable stainless steel probes.
About Limatherm

Products & Features

Limatherm specializes in industrial temperature measurement and control solutions. Core Products & Services are 

  • Temperature Sensors: wired and head sensors, mineral-insulated (sheathed) RTD and Thermocouples
  • Hazardous Area Solutions: intrinsically safe (Exia) and flameproof (Exd) 
  • Accredited Laboratory: acc. to ISO/IEC 17025 standard
  • High-Temperature Patent:  up to 2300°C
  • Material Diversity: acid-resistant steel, borosilicate glass, ceramics (e.g., Hexoloy)

Key Benefits

  • Reliability in Extreme Environments: Suitable for high-temperature and harsh conditions (e.g., molten metal, acidic environments).
  • Adaptability: Suitable for diverse industries such as metallurgy, chemical processing, and food production.
  • Easy Installation: Features like replaceable inserts and flexible mineral-insulated cables reduce maintenance time and cost.