Pressure

Bourdon Tube
7 products
Boiler
2 products
Chemical
3 products
Phenolic
1 product
Differential
7 products
Capsule
3 products
Test Pressure Gauge
5 products
Contact
4 products
Diaphragm
3 products
Diaphragm Seal
1 product
Digital
2 products
Pressure Transmitter
10 products
Pressure Switch
5 products
Load and Force
11 products
Accessories
15 products
Temperature

RTD
5 products
Bimetallic
2 products
Gas Filled
2 products
Non-Replaceable Inserts
3 products
Replaceable Inserts
4 products
Ceramic Protection
7 products
Mineral Insulated
4 products
Flameproof and Intrinsically Safe
7 products
Surface and Machinery
30 products
Food and Pharma
7 products
HVAC
9 products
Acids, Alkalis, Salts
4 products
Temperature Switch
1 product
Thermowell
16 products
Indicator, Controller
8 products
Accessories
9 products
Humidity
7 products
Thermocouple
50 products
Cable Sensors
38 products
Head Sensors
9 products
High Temperature
6 products
Temperature Transmitter
6 products
Flow

Electro Magnetic
2 products
Vortex
3 products
Swirl
1 product
Ultrasonic
7 products
Coriolis Mass Flowmeter
28 products
Positive Displacement
6 products
Variable Area
1 product
Differential Pressure
7 products
Turbine
4 products
Flap
1 product
Side Glass
1 product
Thermal gas
5 products
Air Flow/Quality
11 products
Flow Switch
9 products
Flow Computer
3 products
Flow Accessories
2 products
Dosing/Batching
6 products
Level

Radar
3 products
Ultrasonic
1 product
Capacitance
7 products
Conductivity
4 products
Magnetic
1 product
Float/Buoyancy
7 products
Level Indicator
3 products
Vibrating Rod
3 products
Rotary Paddle
2 products
Hydrostatic
2 products
Optical
1 product
Level Switches
11 products
Calibration Devices

Multi Function Calibrators
2 products
Pressure Calibrators
4 products
Temperature Calibrators
6 products
Valve Testing
1 product
Calibration Software
1 product
Valves

Actuator
1 product
Ball Valves
2 products
Butterfly Valves
3 products
Gate Valves
2 products
Globe Valves
3 products
Analytical Sensors

Water Quality Sensors
16 products
Process Systems
11 products
Density and Concentration
12 products
Analytical Controller
2 products
Process Systems
SWIRL FLOW METER SSEA-SWFVI
The Schmierer SEA SSEA Swirl Flow Meter (SSEASWFVI) measures the flow of gases, steam and low-viscosity liquids using the swirl precession principle. Its internal swirl-generating element creates a controlled rotating flow pattern, allowing the meter to determine flow rate from the resulting pressure oscillations.
Moreover, the SSEA Swirl Flow Meter requires relatively short straight pipe sections. With no moving parts, it also offers low maintenance requirements and stable performance. Therefore, it is a practical solution for industrial plants that need reliable flow measurement in space-constrained piping systems.
Description
Description
Schmierer SEA SSEA Swirl Flow Meter – High-Accuracy Flow Measurement for Gas, Steam and Liquids
Models and Configurations
The SSEASWFVI is the SSEA Enhanced Swirl Flow Meter listed in the Schmierer SEA product catalogue. Configuration options can be selected according to the process medium, operating conditions and installation requirements.
Standard configuration: For compatible gases, liquids and steam under specified operating conditions.- High-temperature configuration: Extended-temperature versions are available for demanding steam applications.
- Material options: Carbon steel, SS304 and SS316L body options, with alternative sensor materials for compatible applications.
- Output options: Analog and pulse outputs, with optional digital communication.
- Compensated measurement: Optional pressure and temperature inputs can support mass-flow or standard-volume-flow calculations.
Key Specifications
- Product name: SSEA Enhanced Swirl Flow Meter
- Model / SKU: SSEASWFVI
- Measurement principle: Swirl precession
- Measured media: Liquids, gases, saturated steam and superheated steam
- Accuracy for liquids: Typically ±0.5% of rate under calibrated conditions
- Accuracy for gases and steam: Typically ±1.0% of rate under calibrated conditions
- Turndown ratio: Up to 1:20, depending on the medium and installation
- Minimum flow velocity: As low as approximately 0.5 m/s, depending on the application
- Straight pipe requirements: Typically 3 × DN upstream and 1 × DN downstream
- Standard temperature capability: Up to 250°C
- Optional temperature capability: Up to 400°C for extended-temperature steam versions
- Pressure ratings: 1.6 MPa, 2.5 MPa or 4.0 MPa, depending on the model
- Body and flange materials: Carbon steel, SS304 or SS316L
- Sensor wetted materials: SS304, SS316L, Hastelloy C, Hastelloy B or titanium, depending on configuration
- Sensor type: Piezoelectric
- Outputs: 4–20 mA and pulse
- Communication: HART and Modbus RTU options
- Design: No moving parts and a fully welded flow path
Working Principle
The SSEA Swirl Flow Meter operates using the principle of vortex precession.
Step 1 – Create a swirling flow. As the fluid enters the meter, a fixed internal swirl element forces it into rotational movement. This creates a primary vortex within the measuring section.
Step 2 – Generate vortex precession. As the swirling fluid moves through the expanded section, the vortex core begins to precess around the central axis. The resulting oscillation frequency changes with the volumetric flow rate.
Step 3 – Detect the signal. An integrated piezoelectric sensor detects the pressure oscillations and converts them into an electrical signal.
Step 4 – Calculate flow. The electronics process the signal to determine the flow rate. With suitable pressure and temperature compensation, the system can also calculate mass flow or standard volume flow.
Consequently, the meter provides a repeatable flow measurement without relying on moving mechanical components.
Advantages
- High measurement accuracy: Typical accuracy reaches ±0.5% for liquids and ±1.0% for gases and steam under specified calibrated conditions.
- Short installation lengths: Typical straight-run requirements of 3D upstream and 1D downstream help save piping space.
- Low-flow capability: Suitable configurations can measure flow velocities as low as approximately 0.5 m/s.
- Vibration and interference resistance: Digital signal processing helps improve signal stability in demanding environments.
- Low maintenance: The absence of moving parts reduces mechanical wear.
- Corrosion-resistant options: Stainless steel and special sensor materials support compatible process media.
- High-temperature operation: Optional versions support demanding steam applications.
- Automation integration: Analog outputs and optional digital communication simplify PLC and DCS integration.
- Flexible flow calculations: Optional pressure and temperature compensation supports more advanced flow measurement.

Applications
The Schmierer SEA SSEA Swirl Flow Meter is suitable for:
- Steam flow measurement and energy monitoring
- Industrial gas flow measurement
- Compressed air systems
- Nitrogen blanketing
- Biogas measurement
- Compressed natural gas (CNG) applications
- Hydrogen flow measurement, subject to material and application compatibility
- Chemical and petrochemical processing
- Power generation and boiler systems
- Industrial utility monitoring
- Process control and consumption monitoring
Installation and Selection
First, identify the process medium and its operating conditions. Next, select a suitable meter size based on the expected minimum, normal and maximum flow rates. This is particularly important because the turndown ratio and minimum measurable flow depend on the application.
Then, confirm the pressure rating, temperature limit, body material and sensor wetted materials. In addition, allow the recommended straight pipe lengths—typically 3D upstream and 1D downstream—and assess any upstream disturbances that could affect the measurement.
Finally, choose the appropriate output and communication options. If the application requires mass flow or standard-volume flow, confirm whether pressure and temperature compensation are included in the selected configuration.
Conclusion
The Schmierer SEA SSEA Swirl Flow Meter provides industrial flow measurement for gases, steam and low-viscosity liquids. Its swirl precession principle, short straight-run requirements and moving-part-free design make it suitable for demanding installations where space and maintenance are important considerations.
Moreover, optional pressure and temperature compensation, combined with flexible output options, supports integration into modern industrial automation and energy monitoring systems.
About SSEA
SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.
SSEA instruments by family
| Family | SSEA products | Stated figures |
|---|---|---|
| Pressure gauges | SRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gauge | SRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial |
| Test pressure gauges | SRU15 test gauge, SFU 15, SF 15 | 250 mm dial |
| Gauge accessories | Syphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointer | See product pages |
| Electrical pressure | PTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gauge | PTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar |
| Pressure calibration | IDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pump | IDTG 100: -1 to 600 bar |
| Temperature | STU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowells | STU02 bimetal thermometer to EN 13190 |
| Flow meters | CMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonic | See product pages |
| Water quality | Digital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllers | See product pages |
How to choose within the range
- General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
- Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
- Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
- A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
- Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.
Service in Shah Alam
Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.
Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.
Related products
Flap Flowmeter KLA
In stock
SKU:
KLA Flap
The Kirchner & Tochter KLA Flap-Type Flowmeter is a robust, inline variable area flow meter designed for the instantaneous measurement and process monitoring of liquids in plant engineering. Based on the same classic operating principle as the KFS series, it features a pivoting inner flap that responds dynamically to fluid flow, offering a highly dependable, viscosity-independent monitoring solution for water, oils, and chemical suspensions.
- KLA Standard: Completely sealed body where internal encapsulated magnets transmit the mechanical flap deflection across the pressure barrier to an external pointer scale.
- KLA-GS: An economical, direct-view model equipped with heavy-duty borosilicate hard glass screens on both the front and back. The operator reads the flow level straight from a scale engraved directly onto the glass window
Massflow Sensor RHM03 small size 0.038 – 5 kg/min
In stock
SKU:
RHM03
The RHM03 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must.
PDF datasheet
Massflow Sensor RHM60 large size 45 – 3000 kg/min
In stock
SKU:
RHM60
The RHM60 is a robust sensor designed for 4″ line sizes. The availablity of a variety of wetted materials and wide pressure/temperature ratings allow use in applications throughout all industries.
PDF datasheet
Massflow Sensor RHM80 large size 130 – 8000 kg/min
In stock
SKU:
RHM80
The RHM80 excels in tough applications where high temperatures, pressures and corrosive fluids are present. Its heavy duty construction withstands extreme applications without losing Coriolis meter performance.
PDF datasheet







