Pressure

Bourdon Tube
7 products
Boiler
2 products
Chemical
3 products
Phenolic
1 product
Differential
7 products
Capsule
3 products
Test Pressure Gauge
5 products
Contact
4 products
Diaphragm
3 products
Diaphragm Seal
1 product
Digital
2 products
Pressure Transmitter
10 products
Pressure Switch
5 products
Load and Force
11 products
Accessories
15 products
Temperature

RTD
5 products
Bimetallic
2 products
Gas Filled
2 products
Non-Replaceable Inserts
3 products
Replaceable Inserts
4 products
Ceramic Protection
7 products
Mineral Insulated
4 products
Flameproof and Intrinsically Safe
7 products
Surface and Machinery
30 products
Food and Pharma
7 products
HVAC
9 products
Acids, Alkalis, Salts
4 products
Temperature Switch
1 product
Thermowell
16 products
Indicator, Controller
8 products
Accessories
9 products
Humidity
7 products
Thermocouple
50 products
Cable Sensors
38 products
Head Sensors
9 products
High Temperature
6 products
Temperature Transmitter
6 products
Flow

Electro Magnetic
2 products
Vortex
3 products
Swirl
1 product
Ultrasonic
7 products
Coriolis Mass Flowmeter
28 products
Positive Displacement
6 products
Variable Area
1 product
Differential Pressure
7 products
Turbine
4 products
Flap
1 product
Side Glass
1 product
Thermal gas
5 products
Air Flow/Quality
11 products
Flow Switch
9 products
Flow Computer
3 products
Flow Accessories
2 products
Dosing/Batching
6 products
Level

Radar
3 products
Ultrasonic
1 product
Capacitance
7 products
Conductivity
4 products
Magnetic
1 product
Float/Buoyancy
7 products
Level Indicator
3 products
Vibrating Rod
3 products
Rotary Paddle
2 products
Hydrostatic
2 products
Optical
1 product
Level Switches
11 products
Calibration Devices

Multi Function Calibrators
2 products
Pressure Calibrators
4 products
Temperature Calibrators
6 products
Valve Testing
1 product
Calibration Software
1 product
Valves

Actuator
1 product
Ball Valves
2 products
Butterfly Valves
3 products
Gate Valves
2 products
Globe Valves
3 products
Analytical Sensors

Water Quality Sensors
16 products
Process Systems
11 products
Density and Concentration
12 products
Analytical Controller
2 products
Process Systems
SSEA-CODX Chemical Oxygen Demand Sensor
The SSEACODX self cleaning COD Sensor delivers reagent-free, real-time tracking of organic pollutants in water. Utilizing advanced UVC LED absorption at 254 nm, it features automatic turbidity compensation and an integrated self-cleaning wiper to ensure stable, low-maintenance online operation across municipal and industrial wastewater applications.
This proven technology provides reliable and accurate analysis of organic pollutants for water quality monitoring at low cost and low maintenance. With rugged design, and integrated turbidity compensation, it is an excellent solution for continuous monitoring of source water, surface water, municipal and industrial wastewater.
SKU:
SSEACODX
Categories: Analytical Sensors, Water Quality Sensors
Description
Description
COD (Chemical Oxygen Demand) Sensor
Chemical Oxygen Demand (COD) measures the amount of oxygen required to chemically oxidize substances in a water sample. It is commonly used to assess wastewater pollution levels and evaluate wastewater treatment performance. COD is expressed in milligrams per liter (mg/L). Generally, a higher COD value indicates a greater concentration of oxidizable pollutants.
The SSEA-CODX self-cleaning COD sensor uses ultraviolet (UV) absorption technology to estimate organic pollution in water. It measures UV absorbance at 254 nm (UV254), which is associated with many dissolved organic compounds.
This technology supports continuous water quality monitoring with low reagent use and reduced maintenance requirements. Its rugged construction and integrated turbidity compensation make it suitable for source water, surface water, and municipal and industrial wastewater applications.

Models
- UV254 COD Sensor (Low Range): Designed for monitoring relatively low concentrations of organic pollutants, with a COD measurement range of 0–500 mg/L.
- UV254 COD Sensor (High Range): Designed for applications with higher organic loading, with a COD measurement range of 0–1500 mg/L.
- Self-Cleaning COD Sensor: An industrial probe equipped with a motorized mechanical brush to reduce biological growth and deposits on the optical surface.
Features
- Digital sensor with RS-485 output and Modbus communication protocol.
- Reagent-free measurement using direct UV spectral absorption.
- UV LED technology for stable, continuous measurement.
- Supports measurement or estimation of parameters such as COD, TOC, turbidity, and temperature, depending on the model and configuration.
- Optional or integrated mechanical self-cleaning brush to reduce biological fouling and extend maintenance intervals.
- Integrated turbidity compensation to help reduce interference from suspended particles.
- IP68-rated housing for submersible applications.
Specifications
| Parameter | SSEA-CODX-B COD Sensor (Low Range) |
SSEA-CODX-C COD Sensor (High Range) |
|---|---|---|
| Measuring Principle | Ultraviolet absorption | Ultraviolet absorption |
| COD Range | 0–500 mg/L | 0–1500 mg/L |
| COD Accuracy | ±5% | ±5% |
| Resolution | 0.01 mg/L | 0.01 mg/L |
| TOC Range | 0–180 mg/L | 0–600 mg/L |
| Turbidity Range | 0–500 NTU | 0–500 NTU |
| Temperature Range | 0–50 °C | 0–50 °C |
| Ingress Protection | IP68 | IP68 |
| Communication Interface | RS-485, Modbus | RS-485, Modbus |
| Power Consumption | 0.25 W (without wiping); 0.8 W (with wiping) | 0.25 W (without wiping); 2 W (with wiping) |
| Power Supply | 12–24 V DC, ≥1 A | 12–24 V DC, ≥1 A |
| Dimensions | Ø50 × 179 mm | Ø50 × 179 mm |
| Cable Length | 10 m standard; customizable | 10 m standard; customizable |
| Body Material | 316L stainless steel or titanium option | 316L stainless steel or titanium option |
Technical Specifications
- Measurement Method: Uses UV254 spectral absorption to estimate organic pollution without conventional chemical reagents.
- Measured and Derived Parameters: Depending on the model and configuration, the sensor can provide COD, TOC, turbidity, and temperature readings. BOD may be an estimated value where supported by the system; it is not a direct measurement of biochemical oxygen demand.
- Communication Interface: RS-485 serial communication using the Modbus protocol.
- Self-Cleaning System: A motorized mechanical brush helps remove deposits and biological growth from the optical measurement surface.
- Turbidity Compensation: Optical reference measurements and internal processing help reduce the influence of suspended particles on readings.
- Enclosure Rating: IP68 housing for suitable submersible monitoring installations.
Working Principle
Conventional laboratory COD testing commonly involves chemical reagents, digestion at elevated temperatures, and a defined testing procedure. In contrast, the SSEA-CODX uses UV254 absorption to provide continuous estimates of organic pollution without routine reagent addition for the optical measurement.
Step 1: UV Light Emission
The sensor emits ultraviolet light at a wavelength of approximately 254 nm through the water sample.
Step 2: Light Absorption
Certain dissolved organic compounds absorb UV light. The amount absorbed depends on the composition and concentration of the compounds, as well as the optical path length.
Step 3: Optical Detection
A detector measures the remaining light intensity. The sensor calculates absorbance by comparing the detected intensity with a reference value.
Step 4: Turbidity Compensation
Where supported, additional optical measurements help compensate for interference caused by suspended particles. However, compensation may not eliminate all effects from turbidity or other interfering substances.
Step 5: COD Estimation and Data Output
The sensor uses its calibration model to estimate COD and transmit the result through the RS-485 interface using Modbus. Because UV absorption varies with the type of organic compounds present, the estimated COD should be checked against laboratory COD results for the actual water matrix.
Applications
- Wastewater Effluent Monitoring: Continuous monitoring of treated effluent from municipal and industrial wastewater treatment plants.
- Wastewater Treatment Optimization: Tracking changes in organic loading to support process monitoring and treatment control.
- Surface Water Monitoring: Monitoring rivers, lakes, and other surface water sources for changes in organic pollution.
- Drinking Water Intake Monitoring: Assessing source water quality and identifying changes in organic matter before treatment.
- Industrial Process Water: Monitoring suitable process water and wastewater streams in industrial facilities.
Important Selection Considerations
- Choose the low-range or high-range model according to the expected COD concentration.
- Confirm whether the application requires a self-cleaning brush.
- Check the sensor’s temperature, pressure, installation, and material compatibility requirements.
- Verify that the control system supports RS-485 Modbus communication.
- Confirm the accuracy of estimated COD values through comparison with laboratory measurements for the specific water sample.
Note: UV254 absorption provides an indirect estimate of COD rather than a direct measurement of total chemical oxygen demand. Actual performance depends on the composition of the water sample, calibration, and interfering substances. Confirm all specifications and available measurement parameters with the manufacturer’s official datasheet before selection.
Related products
CARBOTEC NIR Dissolved CO2 Transmitter – ATR Technology
In stock
SKU:
Carbotec NIR
Achieve real-time, pristine quality validation in your product carbonation lines without cyclical delays. Beverage plants and breweries deploy the Centec CARBOTEC NIR Inline Sensor to maintain continuous carbon dioxide tracking. Because this sophisticated solid-state transmitter utilizes Attenuated Total Reflection (ATR) technology to scan molecular infrared absorption directly at the fluid boundary, it entirely bypasses measurement errors caused by line pressure shocks or temperature spikes. Consequently, your processing plant achieves an ultra-rapid response time of under three seconds, minimizing product variations and ensuring absolute batch uniformity.
Density and Concentration Meter DIMF
In stock
SKU:
DIMF
The liquid density meter of the DIMF series is used for continuous measurement of the density/concentration of liquids or liquid mixtures. The proven tuning fork principle guarantees a high acccuracy with very good long term stability.The robust design ensures reliable operation even under harsh operating conditions.
download pdf datasheet
RHOTEC In-Line Density & Concentration Transmitter
In stock
SKU:
Rhotec
Achieve absolute precision in your continuous liquid blending and real-time concentration tracking loops. Chemical processing plants, breweries, and food production lines deploy the Centec RHOTEC system to secure continuous, high-performance monitoring. Because this sophisticated inline analyzer measures fluid density via an electromagnetically excited resonant U-tube, it completely eliminates manual hydrometer errors and slow grab-sample testing. Consequently, your processing line runs with flawless consistency, optimizing your raw material usage while reducing batch variations to zero.
SSEA-NO3X Nitrate Sensor
In stock
SKU:
SSEA-NO3X
The SSEA-NO3X Nitrate Sensor is an industrial-grade digital probe engineered for continuous, real-time tracking of nitrate ions in aqueous solutions. Eliminating the need for dangerous chemical reagents or complex laboratory prep, this eco-friendly device utilizes advanced Ion-Selective Electrode (ISE) technology to achieve highly precise, instant measurements. Equipped with high-performance PVC membranes, an integrated RS485 Modbus interface, and an optional motorized self-cleaning wiper, it provides robust anti-interference capabilities and stable field operations.







