PVC-Coated Resistance Temperature Sensors upto 100°C

TOPCV-1 / TOPCVE-1. Pt100 resistance thermometers featuring a steel protection tube coated in chemical-resistant polyvinite (PVC), available with either a connection head (TOPCV-1) or a PTFE-insulated lead wire (TOPCVE-1) for electroplating and acid baths up to 100°C. Specifically, they rely on these probes where bare stainless steel corrodes rapidly in cold or warm acid baths. Because these sensors feature a rigid steel protection tube coated in seamless chemical-resistant polyvinite (PVC), they block aggressive electrolytes and stray plating currents completely. Furthermore, they offer flexible termination choices. Consequently, your facility eliminates premature probe burnout. As a result, you maintain accurate, cost-effective temperature tracking across harsh chemical tank environments.

SKU: TOPCV-1, TOPCVE-1 Categories: , Tags: ,
Description

Description

Product Types

The Limatherm TOPCV-1 and TOPCVE-1 polyvinite-coated platform maps into two distinct termination configurations. Thus, you can match your exact tank mounting style and wiring layout:

  • TOPCV-1 (Connection Head Series): Outfitted with a standard industrial connection head mounted above the PVC-coated stem. Therefore, technicians terminate field wiring inside a sealed enclosure or mount an integrated head transmitter.
  • TOPCVE-1 (PTFE Lead Wire Series): Engineered with a direct, factory-sealed PTFE-insulated extension cable exiting the top of the PVC-coated sheath. Consequently, operators hang the compact probe directly over tank edges or inside tight enclosures without a bulky terminal head.

Working Principle

The sensor operates continuously using a precision Pt100 platinum resistance detector sealed inside a steel tube coated in chemical-resistant polyvinite (PVC). First, the bath liquid transfers heat directly onto the outer PVC layer. Because the seamless polyvinite coating blocks corrosive acids and alkalis while insulating against stray electrical currents, thermal energy conducts safely through the steel core to the internal Pt100 element. Next, the platinum resistor captures this temperature shift immediately. Thus, it generates a precise, linear change in electrical resistance corresponding to the active bath temperature. Finally, the terminal block inside the TOPCV-1 head or the PTFE lead wire on the TOPCVE-1 routes this clean signal back to your controller or PLC.

Key Specs

Technical Parameter Manufacturer Specification
Sensing Element Single or Double Pt100 Platinum Resistance Detector per EN 60751 (Class A or Class B)
Operating Temperature Range Continuous chemical and plating bath measurement from -20°C up to +100°C
Protection Tube Construction Rigid steel protection tube coated in seamless chemical-resistant polyvinite (PVC)
Outer Sheath Diameters Standard PVC-coated outer diameters (typically 8 mm, 10 mm, or 12 mm)
Electrical Termination TOPCV-1: Form B / MA connection head (IP65) / TOPCVE-1: Chemical-resistant PTFE lead wire
Wiring Circuits 2-wire, 3-wire, or 4-wire RTD configurations for lead-resistance compensation

Product Models & Functional Configurations

The Limatherm TOPCV-1 and TOPCVE-1 polyvinite-coated catalog offers tailored chemical builds. Moreover, it includes verified factory mounting and electronics options:

  • Custom Immersion Lengths: Manufactured to exact customer insertion lengths. Therefore, the probe reaches the active heating or cooling zone deep inside electroplating and pickling vats cleanly.
  • Over-the-Side Mounting Brackets & Glands: Paired with chemical-resistant plastic mounting holders, sliding flanges, or PVC/PTFE compression fittings for secure tank-wall positioning.
  • 2-Wire, 3-Wire, or 4-Wire RTD Circuits: Supplied in 2-wire, 3-wire, or 4-wire layouts. Consequently, engineers eliminate lead-wire resistance errors over long cable runs to the control panel.
  • AP / LTT Head Transmitter Option (TOPCV-1): Replaces the ceramic terminal block inside the TOPCV-1 connection head with a loop-powered 4–20 mA or HART transmitter. As a result, your PLC receives a noise-immune analog current signal.

Advantages

  • Cost-Effective Acid & Alkali Protection: Seamless polyvinite (PVC) coating shields the internal steel tube from hydrochloric, sulfuric, and chromic acid baths up to +100°C. As a result, you achieve reliable corrosion resistance without paying for expensive exotic alloys.
  • Stray-Current Electrical Isolation: Non-conductive PVC insulates the internal Pt100 element from high-amperage rectifiers and stray currents inside electroplating tanks. Therefore, your control loop avoids signal interference and ground-loop errors.
  • Rigid Steel Core Durability: Unlike fragile glass thermometers, the underlying steel tube prevents snapping or bending during tank agitation and rack loading. Consequently, sensors deliver long service life in busy plating shops.
  • Flexible Head or Cable Termination: Choosing between the TOPCV-1 connection head and the TOPCVE-1 PTFE lead wire lets engineers match open dipping tanks or closed piping effortlessly.

Applications

Surface treatment, chemical, and environmental engineers integrate Limatherm TOPCV-1 and TOPCVE-1 PVC-coated sensors across corrosive liquid baths:

  • Electroplating, Galvanizing & Anodizing Vats: Monitors bath temperatures continuously while isolating the Pt100 sensor from corrosive electrolytes and stray plating currents.
  • Acid Pickling & Degreasing Tanks: Tracks warm hydrochloric, sulfuric, and phosphoric acid cleaning solutions reliably up to +100°C.
  • Wastewater Neutralization & Dosing Pits: Supervises chemical dosing tanks, scrubber sumps, and pH neutralization basins safely.
  • Battery Manufacturing & Chemical Storage: Delivers accurate, non-corroding temperature feedback inside electrolyte mixing and storage vessels.
About Limatherm

Products & Features

Limatherm specializes in industrial temperature measurement and control solutions. Core Products & Services are 

  • Temperature Sensors: wired and head sensors, mineral-insulated (sheathed) RTD and Thermocouples
  • Hazardous Area Solutions: intrinsically safe (Exia) and flameproof (Exd) 
  • Accredited Laboratory: acc. to ISO/IEC 17025 standard
  • High-Temperature Patent:  up to 2300°C
  • Material Diversity: acid-resistant steel, borosilicate glass, ceramics (e.g., Hexoloy)

Key Benefits

  • Reliability in Extreme Environments: Suitable for high-temperature and harsh conditions (e.g., molten metal, acidic environments).
  • Adaptability: Suitable for diverse industries such as metallurgy, chemical processing, and food production.
  • Easy Installation: Features like replaceable inserts and flexible mineral-insulated cables reduce maintenance time and cost.