Melt Pressure Sensor

The Mueller IE MEMP-T is a high-temperature melt pressure sensor and transmitter combo engineered to withstand intense media temperatures up to +410 °C and high operating ranges reaching 1,200 bar. Constructed with a durable 1.4571 CrNi stainless steel body, it provides reliable pressure analytics for heavy industrial plastics and extrusion processing.

SKU: MEMP-T Category:
Description

Description

Models

The MEMP-T is designed for high-temperature melt pressure measurement in applications where elevated process temperatures can damage sensitive sensor electronics. Depending on the configuration, thermal separation can be provided through a suitable sensor design or capillary arrangement to protect the measurement electronics.

  • MEMP-T CANopen Transmitter: Provides digital CANopen communication for integration with compatible automation systems, supporting digital data exchange, pressure monitoring, and diagnostic functions. Product Reference
  • MEMP-T Analog HART Transmitter: Uses a 2-wire, loop-powered 4–20 mA output with superimposed HART communication for process monitoring, configuration, and parameter adjustment through compatible devices.

Technical Features

  • Pressure Range: 0 to 50 bar up to 0 to 1,200 bar, depending on the model.
  • Output: 4–20 mA, 2-wire with HART communication, or CANopen, depending on the version.
  • Supply Voltage: 12–32 VDC for the specified current-loop version. Verify the supply requirements for CANopen variants separately.
  • Accuracy: Less than 0.5% of the terminal value, as specified.
  • Process Connection: 1/2″-20UNF-2A, with or without a capillary tube, depending on the configuration.
  • Electrical Connection: MIL connector, M12 connector, or cable outlet, depending on the model.
  • Ambient Temperature: -20 to +85 °C.
  • Medium Temperature: -30 to +410 °C, depending on the configuration.
  • Configuration: Software-based parameter adjustment, where supported.
  • Wetted Material: Stainless steel 1.4571 (CrNi stainless steel).
  • Ingress Protection: IP65 or IP68, depending on the model and electrical connection.

Working Principle

  1. Direct Melt Contact: Molten plastic or another compatible high-temperature medium applies pressure to the measuring diaphragm at the tip of the process connection.
  2. Pressure Transmission: The diaphragm transfers the applied pressure to the internal sensing system. Depending on the design, a fill-fluid system or capillary arrangement can provide thermal separation between the hot process connection and the sensor electronics.
  3. Sensor Conversion: The internal sensing element converts the transmitted pressure into an electrical signal proportional to the applied pressure.
  4. Signal Processing: The electronics process and scale the measurement, then provide the corresponding output through the configured 4–20 mA/HART or CANopen interface.
  5. Control System Integration: The output is transmitted to a PLC, DCS, or other compatible automation system for continuous pressure monitoring, process control, and alarm handling.

Applications

  • Plastic Extrusion Lines: Monitoring melt pressure during sheet, film, and profile extrusion to support consistent product quality and stable process operation.
  • Chemical Fiber Spinning: Measuring polymer melt pressure during the production of synthetic yarns, polyester fibers, and other polymer-based materials.
  • Rubber Processing and Injection Molding: Monitoring pressure in extruder barrels and molding systems to help detect overpressure conditions and protect equipment.
  • High-Temperature Process Systems: Measuring pressure in compatible hot-process applications within the selected sensor’s specified pressure and temperature limits.

Note: Confirm the exact MEMP-T datasheet before specifying the instrument. In particular, verify the pressure range, maximum medium temperature, output protocol, supply voltage, accuracy definition, and ingress protection for the selected configuration. HART and CANopen should not be assumed to be available simultaneously on every model.

About Muller IE

Products & Features

Müller Industrie Elektronik GmbH from Germany is specializing in modular and compact sensors for customized hardware and electronic solutions, IO Link, digital displays, OEM manufacturing, digital displays, product certifications, etc.

  • Sensors & Transmitters: Temperature, Force, Pressure, Level, Flow, Humidity, and Inclination measurement.
  • MI-Series (Modular Inline Sensors): High-density, miniature housing designed for, restricted spaces in machinery, plant engineering, and vehicle construction.
  • Digital Indicators
  • OEM Electronics & IO-Link: Customized, low-cost sensor boards and IO-Link-capable products for industrial automation.
  • Safety Technology: SMM-HD-SIL1-IO: Strain gauge bridge measuring amplifier with SIL1/PLc safety

Key Benefits

  • Broad Sensor Portfolio
  • Modular Product Design
  • Robust & Certified Technology: IECEx, EHEDG, SIL3, TÜV-certified
  • Advanced Digital Indicators: full graphic TFT (LCD) displays and universal measuring instruments
  • In-house Development & Production: made in Germany