Modular Differential Pressure Sensor MUDS

The Müller MUDS Series is a high-performance, light weight, cost-effective wet/wet differential pressure sensor designed by Müller Industrie-Elektronik GmbH. Engineered specifically to handle direct pressure measurements in both liquid and gaseous media, it utilizes a lightweight housing derived from advanced automotive engineering to deliver highly accurate pressure readings in compact spaces. The MUDS introduces a cost-optimized, polymer-based platform optimized for commercial building tech and liquids:
Standard Analog Variant: The core base model that transmits pressure data as a standard linear analog output (configurable via software to 4…20 mA 2-wire, or 0…20 mA / 0…10 VDC 3-wire systems).
MUDS-IO (IO-Link) Variant: A smart-factory digital model featuring a built-in IO-Link interface for complete remote configuration, digital data streaming, and automated condition monitoring.
Display Variant: An upgraded configuration equipped with an integrated local digital display panel and 2x programmable switching outputs.

SKU: MUDS Category: Tag:
Description

Description

Achieve rock-solid precision and dynamic differential monitoring across your industrial filters, pumps, and ventilation systems. Industrial plant operators, HVAC technicians, and process engineers deploy the Müller Industrie-Elektronik MUDS series to secure continuous tracking of pressure drop variables. Because this premium electronic transmitter utilizes an advanced, piezoresistive silicon measuring cell or a robust dry ceramic sensor block, it isolates subtle differences between two process points with exceptional repeatability. Consequently, your facility maintains absolute tracking loop visibility, allowing you to optimize filter maintenance schedules, detect pipeline blockages early, and prevent unexpected breakdown downtime.

Product Types

The differential tracking platform configures dynamically to meet your exact mechanical line layouts, media properties, and control room wiring protocols:

  • MUDS Standard Industrial Series: Outfitted with a compact, rugged housing and dual process ports optimized for standard ventilation channels, clean room filters, and air handlers.
  • MUDS Liquid Process Variant: Engineered with reinforced structural stainless steel chambers built explicitly to tolerate aggressive water circulation loops and hydraulic systems.
  • Intelligent Digital Display Version: Equipped with an integrated local LCD screen display providing active on-site metrics alongside traditional analog telemetry outputs.

Working Principle

The device operates continuously using high-accuracy mechanical membrane displacement to evaluate pressure variances between separate process zones. The internal sensor housing features two isolated pressure paths—the high-pressure side and the low-pressure side—separated by an internal measuring diaphragm. When process fluid or gas streams press into the dual intake ports, the membrane flexes toward the lower force vector. This micro-deformation deforms an integrated semiconductor bridge circuit, shifting its electrical balance instantly. Finally, the internal microprocessors compute this delta value, apply automated internal temperature compensation curves, and translate the result into a continuous, linearized output signal loop.

Key Specs

Technical Parameter Manufacturer Specification
Measuring Range Spectrum Differential: From low-range 0…10 mbar up to high-range 0…25 bar scales
System Accuracy Rating Pristine ≤ ± 0.5% (Optional high-precision variants ≤ ± 0.2% available)
Signal Output Formats Standard 4–20 mA (2-wire) / 0–10 VDC / digital RS485 Modbus RTU options
Maximum Static Line Pressure Up to 50 bar one-sided overpressure tolerance limit (range dependent)
Wetted Housing Material Premium AISI 316L (1.4404) Stainless Steel, Aluminum, or technical polymers
Ingress Protection Class IP65 Waterproof Housing according to EN60529 specifications

Advantages

  • Elite Low-Range Sensitivity: Premium micro-machined sensor bridge elements capture subtle air velocity and gas deviations down to single-digit millibar tiers. As a result, your plant manages delicate clean-room overpressure loops with elite fidelity.
  • Massive Static Overpressure Safety: The rugged internal structural core handles high static system forces on either wetted port without fracturing. Therefore, the sensor avoids permanent failure during intense line surges or primary pump starts.
  • Automated Thermal Compensation: An integrated internal dampening circuit constantly evaluates fluid heat levels. Consequently, the device completely eliminates measurement inaccuracies caused by flashing pipeline temperatures.
  • Zero Mechanical Moving Parts: The solid-state internal sensor configuration contains no spinning components, linkages, or indicators. Consequently, your facility minimizes maintenance calibration downtime and drops replacement budgets to zero.

Applications

Process control and HVAC utility engineers integrate the fixed Müller Industrie-Elektronik MUDS differential transmitters across critical infrastructure paths:

  • Filter Condition Supervision: Monitors continuous pressure drops across heavy-duty fluid filter grids and air handling units to alert operators to necessary backwash rounds.
  • Clean Room Pressurization: Tracks tiny differential balances between isolated laboratory spaces and exterior utility corridors to prevent toxic cross-contamination.
  • Pump Output Optimization: Measures real-time pressure differences between pump intake and discharge headers to protect heavy machinery from cavitation loops.
  • Ventilation Flow Automation: Supervises volumetric line metrics inside duct runs by monitoring delta values across inline pitot tubes or orifice plates safely.
About Muller IE

Products & Features

Müller Industrie Elektronik GmbH from Germany is specializing in modular and compact sensors for customized hardware and electronic solutions, IO Link, digital displays, OEM manufacturing, digital displays, product certifications, etc.

  • Sensors & Transmitters: Temperature, Force, Pressure, Level, Flow, Humidity, and Inclination measurement.
  • MI-Series (Modular Inline Sensors): High-density, miniature housing designed for, restricted spaces in machinery, plant engineering, and vehicle construction.
  • Digital Indicators
  • OEM Electronics & IO-Link: Customized, low-cost sensor boards and IO-Link-capable products for industrial automation.
  • Safety Technology: SMM-HD-SIL1-IO: Strain gauge bridge measuring amplifier with SIL1/PLc safety

Key Benefits

  • Broad Sensor Portfolio
  • Modular Product Design
  • Robust & Certified Technology: IECEx, EHEDG, SIL3, TÜV-certified
  • Advanced Digital Indicators: full graphic TFT (LCD) displays and universal measuring instruments
  • In-house Development & Production: made in Germany