ECAS Capacitance Level Switches

Optimize your industrial inventory tracking with ultra-reliable point level measurement. The Ensim ECAS series delivers high-performance level monitoring across conductive and low conductive, aggressive, corrosive liquids, bulk solids, and sticky pastes. Because this robust sensor actively tracks capacitance variations between its electrode rod and the tank wall, it easily ignores false triggers caused by material buildup. Consequently, processing facilities achieve seamless overfill prevention and dry-run safety under extreme mechanical and thermal conditions.

SKU: ecas Categories: ,
Description

Description

Product Types

The system features four dedicated material configurations to match your exact media requirements:

  • ECAS 100 Series: Tailored specifically to monitor conductive liquids.
  • ECAS 200 Series: Engineered exclusively to track low-conductive liquids and oils.
  • ECAS 300 Series: Built to measure bulk solids, powders, and granulated materials.
  • ECAS 400 Series: Formulated to handle highly adhesive pastes and corrosive acid/basic liquids.
  • DX-ECAS Series: Outfitted with explosion-proof ATEX enclosures for hazardous deployment zones.

Working Principle

The device operates as a dynamic capacitor within your storage tank. The sensor electrode rod forms one conductive plate, while the surrounding tank wall acts as the opposing plate. When the rising target material fills the gap between them, the dielectric constant shifts immediately. This shift causes a sharp variation in electrical capacitance. Finally, the integrated electronics analyze the deviation and trigger a reliable contact output as soon as the material exceeds your pre-set threshold.

Key Specs

Technical Parameter Manufacturer Specification
Operating Pressure Range -1 bar to +25 bar
Process Temperature -40°C up to +200°C (variant dependent)
Output Configuration 1x 5A / 250VAC NO/NC Relay contact
Process Connection 1” BSP Male Thread (Standard)
Housing Options Heavy-Duty Aluminum or Corrosion-Resistant Plastic
Maximum Probe Length Up to 4m (Double Graded) / Up to 6m (Non-insulated)

Product Models

The ECAS point level switch family maps into clear engineering sub-models built according to extension styles and target applications:

  • ECAS 101 / 201 / 301 / 401 Series: The definitive **Standard Rigid Rod** series. These models feature a solid stainless steel probe completely or partially wrapped in a protective insulation sleeve, designed for direct top or side insertion in vessels up to 4 meters deep.
  • ECAS 102 / 202 / 302 / 402 Series: The heavy-duty **High-Temperature** rigid rod configurations. These models are outfitted with integrated thermal cooling extensions between the process connection and the electronic head housing to shield internal circuitry from extreme process heat up to +200°C.
  • ECAS 104 / 204 / 304 / 404 Series: The extended **Flexible Cable** series. Instead of a solid metal bar, these models utilize high-tensile, insulated stainless steel wire ropes weighted at the tip, optimized for high-capacity deep silos, underground sumps, or long-range top-down point alerts up to 6 meters.
  • Dx-ECAS 100 / 200 / 300 / 400 Series: The certified **Explosion-Proof** family. Available across all rod, cooling neck, and cable geometries, these variants house the microprocessors inside an ATEX/IECEx certified flameproof die-cast aluminum enclosure for safe Gas Zone 1/2 and Dust Zone 21/22 deployment.

Advantages

  • Buildup Immunity: The smart capacitive design actively rejects false triggers caused by sticky residues. As a result, the sensor maintains pristine accuracy even when material coats the probe.
  • Adjustable Sensitivity: Operators can easily customize the threshold calibration. Therefore, the device quickly adapts to shifting fluid properties without hardware modifications.
  • No Moving Parts: The solid-state configuration eliminates mechanical wear and tear. Consequently, your facility minimizes maintenance downtime and lowers operational overhead.
  • Backlit Interface: The vibrant LCD panel features straightforward English instructions. You can set parameters, verify statuses, and diagnose errors directly at the tank site.

Applications

Industrial operations deploy the Ensim ECAS level switches across a diverse range of automation workflows:

  • Chemical Processing: Monitors corrosive acids, bases, and aggressive chemical reagents in insulated or conductive vessels.
  • Food & Beverage: Controls storage levels for high-viscosity pastes, syrups, dairy products, and sticky ingredients.
  • Bulk Powder Logistics: Manages dry silos containing cement, sand, plastics, grains, and antistatic powders.
  • Water Treatment: Delivers heavy-duty overfill protection in wastewater processing plants and storage reservoirs.
About Ensim

Products & Features

Ensim Sensors from Turkiye provides a variety of level, flow, pressure and temperature instruments for liquids, solids and powders designed for demanding industrial environments in explosive environments for point detection (switches) or continuous monitoring (transmitters):
  • Radar Level: non-contact and guided wave sensors
  • Capacitive Level Sensors:
  • Magnetic By-pass and Visual Indicators
  • Hydrostatic
  • Ultrasonic
  • Magnetic Float 
  • Rotary Paddle, Vibrating Fork/Rod 
  • Flow Switches

Key Benefits

  • Rugged Construction, Reliability, Low Maintenance
  • Advanced Level Sensing: in dusty, humid, or smoky environments
  • Easy Integration: Designed for quick commissioning and simple installation into existing processes.