Pressure

Bourdon Tube
7 products
Boiler
2 products
Chemical
3 products
Phenolic
1 product
Differential
7 products
Capsule
3 products
Test Pressure Gauge
5 products
Contact
4 products
Diaphragm
3 products
Diaphragm Seal
1 product
Digital
2 products
Pressure Transmitter
10 products
Pressure Switch
5 products
Load and Force
11 products
Accessories
15 products
Temperature

RTD
5 products
Bimetallic
2 products
Gas Filled
2 products
Non-Replaceable Inserts
3 products
Replaceable Inserts
4 products
Ceramic Protection
7 products
Mineral Insulated
4 products
Flameproof and Intrinsically Safe
7 products
Surface and Machinery
30 products
Food and Pharma
7 products
HVAC
9 products
Acids, Alkalis, Salts
4 products
Temperature Switch
1 product
Thermowell
16 products
Indicator, Controller
8 products
Accessories
9 products
Humidity
7 products
Thermocouple
50 products
Cable Sensors
38 products
Head Sensors
9 products
High Temperature
6 products
Temperature Transmitter
6 products
Flow

Electro Magnetic
2 products
Vortex
3 products
Swirl
1 product
Ultrasonic
7 products
Coriolis Mass Flowmeter
28 products
Positive Displacement
6 products
Variable Area
1 product
Differential Pressure
7 products
Turbine
4 products
Flap
1 product
Side Glass
1 product
Thermal gas
5 products
Air Flow/Quality
11 products
Flow Switch
9 products
Flow Computer
3 products
Flow Accessories
2 products
Dosing/Batching
6 products
Level

Radar
3 products
Ultrasonic
1 product
Capacitance
7 products
Conductivity
4 products
Magnetic
1 product
Float/Buoyancy
7 products
Level Indicator
3 products
Vibrating Rod
3 products
Rotary Paddle
2 products
Hydrostatic
2 products
Optical
1 product
Level Switches
11 products
Calibration Devices

Multi Function Calibrators
2 products
Pressure Calibrators
4 products
Temperature Calibrators
6 products
Valve Testing
1 product
Calibration Software
1 product
Valves

Actuator
1 product
Ball Valves
2 products
Butterfly Valves
3 products
Gate Valves
2 products
Globe Valves
3 products
Analytical Sensors

Water Quality Sensors
16 products
Process Systems
11 products
Density and Concentration
12 products
Analytical Controller
2 products
Process Systems
PTX-36 Pressure Gauge Transmitter with Local Display
The Schmierer SEA PTX-36 Pressure Gauge Transmitter with Local Display combines mechanical pressure indication with electronic pressure monitoring in one instrument. It provides a clear analog reading at the installation point while transmitting a standard 4–20 mA signal to a PLC, PID controller, or data logger. As a result, operators can monitor pressure locally and integrate measurements into an automated control system.
The PTX-36 features a solid-front gauge case and a stainless steel construction. Moreover, its mechanical display allows users to read the pressure directly, even during a power failure. This combination makes the PTX-36 suitable for industrial applications that require both local indication and remote pressure monitoring.
SKU:
PTX-36
Categories: Bourdon Tube, Contact, Pressure Transmitter
Description
Description
Key Features
- Dual pressure monitoring: Combines a mechanical analog display with an electronic transmitter output.
- 4–20 mA output: Sends pressure measurements to compatible PLCs, PID controllers, and data loggers.
- Local pressure indication: Allows operators to check process pressure directly at the instrument.
- Stainless steel construction: Supports use in demanding industrial environments.
- Multiple dial sizes: Available in 4-inch and 6-inch versions, according to the manufacturer’s product information.
- Wide pressure measurement options: Manufacturer information lists gauge, compound, and vacuum measurement ranges.
- Fast response: The listed transmitter response time is 50 milliseconds.
- Safety features: Includes safety glass and a blow-off plug, as specified in the product information.
Working Principle
The PTX-36 uses a pressure-sensitive measuring element to respond to changes in process pressure. Its mechanical movement drives the pointer across the analog dial, allowing operators to read the pressure directly.
At the same time, the integrated pressure transmitter converts the measured pressure into a proportional 4–20 mA electrical signal. The control system receives this signal and displays the pressure value for remote monitoring. Furthermore, the signal can support process control, data logging, and alarm functions when the receiving system is configured accordingly.
The transmitter uses a two-wire, 24 V DC supply, according to the manufacturer’s published specifications. Therefore, users can integrate it into compatible industrial instrumentation loops. However, the receiving system must use the correct range and scaling to display the pressure accurately.
Technical Specifications
- Manufacturer: Schmierer SEA
- Model: PTX-36
- Product type: Pressure gauge transmitter with local display
- Dial size: 4 inches or 6 inches
- Pressure measurement: Gauge, compound, and vacuum ranges
- Published pressure range: From 0–600 mbar to 0–600 bar
- Transmitter output: 4–20 mA
- Electrical supply: 24 V DC, two-wire configuration
- Transmitter response time: 50 ms
- Process temperature: Manufacturer information states up to 300°C; verify the applicable version and installation requirements
- Construction: Stainless steel
- Protection rating: IP65
- Window: Safety glass
- Process connection: Bottom connection
- Additional safety feature: Blow-off plug
Note: Specifications and available ranges depend on the selected configuration. Confirm the datasheet for the required pressure range, process temperature, connection, and transmitter option before ordering.
Applications
- Oil and gas: Monitors pressure in compatible process systems and equipment.
- Pharmaceutical manufacturing: Supports local and remote pressure monitoring where the selected materials and configuration meet process requirements.
- Refrigeration systems: Helps operators monitor system pressure and transmit readings to control equipment.
- HVAC systems: Supports pressure monitoring in compatible heating, ventilation, and cooling installations.
- Compressors: Provides local pressure indication and a remote signal for monitoring operating conditions.
- Industrial automation: Connects pressure measurement to PLCs, PID controllers, and data acquisition systems.
Benefits of the PTX-36 Pressure Gauge Transmitter
Local and remote monitoring: The PTX-36 combines a visible analog reading with an electronic output. Consequently, operators can check pressure at the equipment while the control room monitors the same measurement.
Integration with control systems: Its 4–20 mA output supports connection to compatible automation systems. This makes it easier to incorporate pressure data into monitoring and control strategies.
Readability during power failure: The mechanical dial provides a direct pressure indication without relying on the electronic display or transmitter signal. The electronic output, however, requires its specified power supply.
Flexible pressure measurement: The available measurement options support different pressure-monitoring requirements. Therefore, users can select a suitable version based on the process conditions.
Industrial construction: Its stainless steel case and specified IP65 protection help support use in suitable industrial environments.
About SSEA
SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.
SSEA instruments by family
| Family | SSEA products | Stated figures |
|---|---|---|
| Pressure gauges | SRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gauge | SRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial |
| Test pressure gauges | SRU15 test gauge, SFU 15, SF 15 | 250 mm dial |
| Gauge accessories | Syphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointer | See product pages |
| Electrical pressure | PTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gauge | PTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar |
| Pressure calibration | IDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pump | IDTG 100: -1 to 600 bar |
| Temperature | STU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowells | STU02 bimetal thermometer to EN 13190 |
| Flow meters | CMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonic | See product pages |
| Water quality | Digital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllers | See product pages |
How to choose within the range
- General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
- Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
- Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
- A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
- Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.
Service in Shah Alam
Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.
Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.
Related products
Melt Pressure Sensor
In stock
SKU:
MEMP-T
The Mueller IE MEMP-T is a high-temperature melt pressure sensor and transmitter combo engineered to withstand intense media temperatures up to +410 °C and high operating ranges reaching 1,200 bar. Constructed with a durable 1.4571 CrNi stainless steel body, it provides reliable pressure analytics for heavy industrial plastics and extrusion processing.
MEPS-H Hygienic Pressure Transmitter – HART
In stock
SKU:
MEPS_H
The Müller Industrie-Elektronik MEPS-H is a hygienic pressure transmitter from the modular ME-Series, designed for pressure measurement in sanitary process environments. Its stainless steel construction and hygienic process connection support reliable monitoring in applications where cleanliness and contamination control are essential.
PT-HL hydrostatic level sensor
In stock
SKU:
PT-HL
The PT-HL from Müller Industrie-Elektronik is a high-performance submersible hydrostatic pressure transmitter engineered for continuous liquid level tracking in deep wells, tanks, and reservoirs. Delivering a standard 4...20 mA output across versatile ranges from 0...0.1 bar up to 0...10 bar, it features a rugged stainless steel or Hastelloy enclosure with a permanent IP68 protection class. Equipped with an atmospherically vented cable, it eliminates atmospheric pressure skewing to ensure steady performance in demanding industrial and environmental water applications.
SRU 35 Stainless Steel Pressure Gauge
In stock
SKU:
SRU35
The Schmierer SEA Bourdon Tube Pressure Gauge SRU 35 is a semi-stainless steel pressure gauge designed for dependable local pressure measurement in industrial systems. It combines a protective stainless steel case with a copper-alloy socket and movement. This construction provides a practical solution for routine pressure monitoring in compatible process applications.
The SRU 35 features a clear plexiglass window and a dual-scale dial displaying pressure in bar and psi. Moreover, its liquid-fillable design helps dampen pointer fluctuations caused by mechanical vibration and pressure pulsations. A neoprene rubber blowback disc also supports the gauge’s safety design.







