Pressure

Bourdon Tube
7 products
Boiler
2 products
Chemical
3 products
Phenolic
1 product
Differential
7 products
Capsule
3 products
Test Pressure Gauge
5 products
Contact
4 products
Diaphragm
3 products
Diaphragm Seal
1 product
Digital
2 products
Pressure Transmitter
10 products
Pressure Switch
5 products
Load and Force
11 products
Accessories
15 products
Temperature

RTD
5 products
Bimetallic
2 products
Gas Filled
2 products
Non-Replaceable Inserts
3 products
Replaceable Inserts
4 products
Ceramic Protection
7 products
Mineral Insulated
4 products
Flameproof and Intrinsically Safe
7 products
Surface and Machinery
30 products
Food and Pharma
7 products
HVAC
9 products
Acids, Alkalis, Salts
4 products
Temperature Switch
1 product
Thermowell
16 products
Indicator, Controller
8 products
Accessories
9 products
Humidity
7 products
Thermocouple
50 products
Cable Sensors
38 products
Head Sensors
9 products
High Temperature
6 products
Temperature Transmitter
6 products
Flow

Electro Magnetic
2 products
Vortex
3 products
Swirl
1 product
Ultrasonic
7 products
Coriolis Mass Flowmeter
28 products
Positive Displacement
6 products
Variable Area
1 product
Differential Pressure
7 products
Turbine
4 products
Flap
1 product
Side Glass
1 product
Thermal gas
5 products
Air Flow/Quality
11 products
Flow Switch
9 products
Flow Computer
3 products
Flow Accessories
2 products
Dosing/Batching
6 products
Level

Radar
3 products
Ultrasonic
1 product
Capacitance
7 products
Conductivity
4 products
Magnetic
1 product
Float/Buoyancy
7 products
Level Indicator
3 products
Vibrating Rod
3 products
Rotary Paddle
2 products
Hydrostatic
2 products
Optical
1 product
Level Switches
11 products
Calibration Devices

Multi Function Calibrators
2 products
Pressure Calibrators
4 products
Temperature Calibrators
6 products
Valve Testing
1 product
Calibration Software
1 product
Valves

Actuator
1 product
Ball Valves
2 products
Butterfly Valves
3 products
Gate Valves
2 products
Globe Valves
3 products
Analytical Sensors

Water Quality Sensors
16 products
Process Systems
11 products
Density and Concentration
12 products
Analytical Controller
2 products
Process Systems
UFP-1.0 Portable Clamp-On Ultrasonic Flowmeter
The Schmierer SEA UFP-1.0 Portable Ultrasonic Flowmeter provides a convenient solution for checking liquid flow without cutting into or interrupting the pipeline. It uses clamp-on ultrasonic transducers to measure flow from outside the pipe. Therefore, technicians can perform flow checks without removing sections of pipe or installing an in-line meter.
The UFP-1.0 supports short-term measurements, long-term monitoring, data logging, and verification of existing flowmeters. Moreover, its portable design, rechargeable lithium-ion battery, and backlit color display make it suitable for field inspections and routine maintenance. With a stated pipe size range of DN25 to DN5000, it can support flow measurement across a wide variety of pipeline sizes.
SKU:
SSEA UFP1.0
Categories: Flowmeter, Ultrasonic
Description
Description
Key Features
- Non-invasive clamp-on measurement: The transducers mount on the outside of the pipe, allowing flow checks without direct contact with the process liquid.
- Wide pipe size range: Supports pipe diameters from 25 mm to 5000 mm, subject to the appropriate installation configuration.
- Portable design: The handheld transmitter and carrying case support transportation between measurement locations.
- High-resolution display: The 4.3-inch TFT LCD with backlighting simplifies setup and measurement monitoring.
- Data logging: A 2 GB SD card stores measurement data for later transfer and evaluation.
- Rechargeable battery: The lithium-ion battery supports up to 12 hours of continuous operation under the manufacturer’s stated conditions.
- Analog output: A 4–20 mA output supports integration with compatible monitoring or recording equipment.
- Industrial enclosure: The transmitter features an IP65-rated die-cast aluminum enclosure.
Working Principle
The UFP-1.0 uses ultrasonic signals to measure the flow of liquid through a pipe. Its clamp-on transducers attach to the pipe’s exterior and transmit and receive ultrasonic signals through the pipe wall and liquid.
The instrument processes the received signals to determine the liquid’s flow velocity. It then uses the configured pipe dimensions and measurement parameters to calculate the flow rate. Because the transducers remain outside the pipeline, the installation avoids direct contact with the process liquid and does not require cutting the pipe.
For reliable measurements, technicians must select a suitable installation location and configure the instrument correctly. In addition, they should follow the manufacturer’s recommendations for transducer spacing, mounting method, and upstream and downstream straight-pipe requirements. The supplied brochure describes both V-method and Z-method transducer mounting arrangements.
Technical Specifications
- Product name: UFP-1.0 Portable Ultrasonic Flowmeter
- Measurement technology: Clamp-on ultrasonic flow measurement
- Flow velocity range: 0.12 to 12 m/s, as stated in the brochure
- Accuracy: ±1.0% within the specified velocity ranges of approximately 0.5 to 5 m/s (1.6 to 16 ft/s)
- Repeatability: 0.15%
- Pipe size range: DN25 to DN5000 (25 mm to 5000 mm; approximately 1 to 200 inches)
- Display: 4.3-inch TFT LCD
- Keyboard: 22 touch keys
- Power supply: Rechargeable lithium-ion battery
- Battery operating time: Up to 12 hours of continuous operation, according to the brochure
- Transmitter enclosure: IP65-rated die-cast aluminum enclosure
- Output: 4–20 mA
- Transducer operating temperature: The brochure states -40°C to +120°C
- Standard transducer cable length: 5 m (approximately 16 ft)
- Data storage: 2 GB SD card
- Transducer mounting methods: V method and Z method
Transducer Mounting Methods
- V method: The brochure identifies this as the standard mounting method. It is generally used for pipe diameters of approximately 25 mm to 400 mm.
- Z method: This method supports larger pipe diameters, approximately 100 mm to 5000 mm. The brochure recommends considering the Z method for pipe diameters above 300 mm.
However, the best mounting arrangement depends on the pipe size, installation conditions, and signal quality. Technicians should follow the manufacturer’s installation guidance to achieve reliable measurement results.
Applications
- Water distribution systems: Check flow at different points in water supply networks.
- Existing flowmeter verification: Compare readings from installed flowmeters with portable measurements.
- Industrial process monitoring: Perform temporary flow checks on compatible liquid pipelines.
- Maintenance and troubleshooting: Investigate flow conditions without modifying the pipeline.
- Hydrology and engineering surveys: Collect flow data during field studies and engineering inspections.
- Long-term monitoring: Record flow measurements for subsequent analysis using the SD card.
These applications reflect the manufacturer’s stated uses for flow checks, monitoring, data logging, and existing meter verification.
Benefits of the Schmierer SEA UFP-1.0
- Reduced installation work: Clamp-on transducers measure from outside the pipe, avoiding the need to cut into the pipeline for sensor installation.
- Flexible field measurements: The portable design allows technicians to check multiple measurement points.
- Convenient data collection: The display, SD card, and 4–20 mA output support different measurement and recording workflows.
- Extended field operation: The rechargeable battery supports up to 12 hours of continuous operation under the stated conditions.
- Broad pipe compatibility: The specified pipe size range supports measurements on both small and large pipelines when the installation is suitable.
- Useful for meter checks: Technicians can use portable readings to help assess the performance of existing flowmeters.
About SSEA
SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.
SSEA instruments by family
| Family | SSEA products | Stated figures |
|---|---|---|
| Pressure gauges | SRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gauge | SRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial |
| Test pressure gauges | SRU15 test gauge, SFU 15, SF 15 | 250 mm dial |
| Gauge accessories | Syphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointer | See product pages |
| Electrical pressure | PTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gauge | PTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar |
| Pressure calibration | IDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pump | IDTG 100: -1 to 600 bar |
| Temperature | STU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowells | STU02 bimetal thermometer to EN 13190 |
| Flow meters | CMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonic | See product pages |
| Water quality | Digital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllers | See product pages |
How to choose within the range
- General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
- Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
- Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
- A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
- Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.
Service in Shah Alam
Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.
Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.
Related products
Massflow Sensor RHM015 small size 0.0015 – 0.6 kg/min
In stock
SKU:
RHM015
The RHM015 is perfect for extremely low flow applications where stability and accuracy are a must. With an application range starting at a few grams a minute, the RHM015L fits R&D and small pilot requirements.
PDF datasheet
Massflow Sensor RHM02 small size 0.02 – 2 kg/min
In stock
SKU:
RHM02
The RHM02 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must.
PDF datasheet
Massflow Sensor RHM03 small size 0.038 – 5 kg/min
In stock
SKU:
RHM03
The RHM03 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must.
PDF datasheet
Massflow Sensor RHM80 large size 130 – 8000 kg/min
In stock
SKU:
RHM80
The RHM80 excels in tough applications where high temperatures, pressures and corrosive fluids are present. Its heavy duty construction withstands extreme applications without losing Coriolis meter performance.
PDF datasheet







