A thermowell is a closed-end tube fixed into the pipe or vessel, so the sensor or dial thermometer inside it can be taken out without draining the line. Schmierer SEA offers its own STW bar-stock range, with wake frequency calculation and exotic alloys available, and offers screw-in, welded and flanged wells and protection tubes from our principal Limatherm.

Which thermowell for which job

The figures below are the ones each product page states; the Limatherm protection tubes and thermowells overview lists tubes for up to 1800 °C.

Type Mounting Material Stated limits and options
STW1 to STW4 (Schmierer SEA) Flanged (STW1 straight, STW3 tapered) or 3/8″ to 1″ NPT/BSP male thread (STW2 straight, STW4 tapered) 316 stainless as standard; carbon steel, 304, 316L, 446; Inconel, Hastelloy C, Monel, titanium, tantalum and more Solid bar stock, 6 mm tip; hydro test at 100 kg/cm²; Teflon, glass, rubber or tungsten carbide lining or coating
SWG, SWS, SWT Screw-in (SWG), welded (SWS), flanged (SWT) Steel 1.0460; boiler steel 1.7335, 1.7380; stainless 1.4541, 1.4571, 1.4404 Bar stock, deep-drilled over the full length, for high pressure and high flow; straight, tapered or stepped
OG Threaded; sensor held by a set screw Stainless 1.4541 G1/4 to G3/4 or M14x1.5 to M27x2; 6 to 14 mm; max 800 °C
OGG Male thread Stainless 1.4541 6 to 14 mm; max 800 °C
OSG Welded Stainless 1.4541 Length 50 to 2000 mm
OTG Flange DN20 PN16 Stainless 1.4541 See product page
OS1 and OS2 tubes Replaceable tube Stainless 1.4541 4 to 15 mm; max 800 °C in air
OS3 tube Replaceable tube Heat-resistant 1.4841, creep-resistant 1.4762, 15Cr25Ti DN20, DN22; up to 1150, 1200 and 1100 °C by material
OS4 tube Replaceable tube Stainless 1.4541 16 and 20 mm
OC ceramic tube Replaceable tube Mullite 610, corundum 799 or monocrystal SAP 5 to 24 mm; for high operating temperatures

How to choose a thermowell

  • Pressure and velocity: fast or high pressure flow calls for a well drilled from solid bar, the STW or SW types; on the STW range a wake frequency calculation to ASME PTC 19.3 can be ordered.
  • Mounting: screw-in (STW2, STW4, SWG, OG, OGG), welded (SWS, OSG) or flanged (STW1, STW3, SWT, OTG), to match the branch on the line.
  • Medium: 316 stainless is the STW standard; for acids, the STW range comes in Hastelloy C or tantalum, or with a glass or Teflon lining.
  • Heat: above the 800 °C of the 1.4541 tubes, choose OS3 in heat-resistant or creep-resistant steel, or a ceramic OC tube.
  • Length and fit: STW insertion depth, lagging length and tip diameters are made to suit the line size; give us the sensor diameter so the bore fits it.
  • What goes inside: the STW range takes RTDs, thermocouples and bimetal dial thermometers, with instrument threads from 1/4″ to 1″ BSP or NPT, or M20.

For furnaces, kilns and flue gases, where there is little pressure, see our protection tube guide.

Service in Shah Alam

A sensor in a well can be drawn out for calibration while the line stays under pressure. Our trained and qualified technical staff calibrate temperature instruments in-house at our Shah Alam service centre and on site.

Send us the process connection, pressure, temperature, medium and the sensor you will fit: send an enquiry. For the instrument that goes inside, see bimetallic thermometers and thermocouples.

Showing 1–12 of 16 results

Pressure Thermowell flanged

In stock

SKU: SWT
Drilled thermowells for use in high pressure and high flow, as security for the proper operation of RTD and TC sensors (ex. type TOPGI-11) in measurement applications. The whole element is made of a single material with a deep drilling over the entire length. They are widely used in heavy industry, food, chemical and power industry. The thermowell is mountable via flange. Barstock download pdf datasheet

Pressure Thermowell screw in

In stock

SKU: SWG
Drilled thermowells for use in high pressure and high flow, as security for the proper operation of RTD and TC sensors (ex. type TOPGI-11) in measurement applications. The whole element is made of a single material with a deep drilling over the entire length. They are widely used in heavy industry, food, chemical and power industry. The thermowell is screwing in a place of measurement via threaded connector. Barstock download pdf datasheet

Pressure Thermowell welded

In stock

SKU: SWS
Drilled thermowells for use in high pressure and high flow, as security for the proper operation of RTD and TC sensors (ex. type TOPGI-11) in measurement applications. The whole element is made of a single material with a deep drilling over the entire length. They are widely used in heavy industry, food, chemical and power industry. Weld-in thermowells are welded directly into the measurement process.High pressure resistant thermowell for welding SWS-P, SWS-Z, SWS-S, SWS-SZ. Barstock download pdf datasheet

Protection Tube Ceramic OC

In stock

SKU: OC
Ceramic protection tubes are suitable for applications with high operating temperatures, replacing standard steel thermowells. Protection tubes are replaceable elements and their selection depends primarily on ambient conditions, operating temperature and measured medium. download pdf datasheet

Protection Tube OS-3

In stock

OS-3protection tube is used with temperature sensor as a replaceable component of the part that deteriorates the most often. It is made of acid-resistant steel. Selection of parameters and design depends on sensor requirements. It is manufactured in accordance with individual client requirements.

Protection Tube OS1&2

In stock

SKU: OS1, OS2
OS-1 or 2 protection tube is used with temperature sensor as a replaceable component of the part that deteriorates the most often. It is made of acid-resistant steel. Selection of parameters and design depends on sensor requirements. download pdf datasheet

Protection Tube OS3

In stock

SKU: OS3
OS-3protection tube is used with temperature sensor as a replaceable component of the part that deteriorates the most often. It is made of acid-resistant steel. Selection of parameters and design depends on sensor requirements. download pdf datasheet

Protection Tube OS4

In stock

SKU: OS4
OS-4 protection tube is used with temperature sensor as a replaceable component of the part that deteriorates the most often. It is made of acid-resistant steel. Selection of parameters and design depends on sensor requirements. download pdf datasheet

Protection Tubes and Thermowells

In stock

SKU: Thermowell
Tubes for high pressure, heat resistant and creep resistant steel tubes, ceramic and special tubes, threaded tubes or suitable for welding, mounting connections Max temperature upto 1800º C download pdf datasheet

STW Series Heavy-Duty Bar-Stock Industrial Thermowells

In stock

SKU: STW1, STW2, STW3, STW4
Safeguard your temperature sensors from harsh process dynamics with the Schmierer SEA STW Series. Expertly fabricated from high-grade solid bar stock by Schmierer SEA, these heavy-duty industrial thermowells provide an impenetrable thermal barrier for RTDs, thermocouples, and bimetal thermometers. Furthermore, their robust design strictly follows ASME PTC 19.3 criteria to isolate basic sensing elements from aggressive chemical corrosion, high fluid velocities, and destructive mechanical forces.

Thermowell OG

In stock

SKU: OG
OG protection tube is a part of measuring installation, where a sensing element (temperature sensor) is installed by means of a set screw. Protection tube is mounted by means of a threaded connector. It is manufactured in accordance with individual client requirements. download pdf datasheet

Thermowell OGG

In stock

SKU: OGG
OGG protection tube is a part of measuring installation, where a sensing element (temperature sensor) is installed by means of a threaded connector. Protection tube is mounted by means of a threaded connector with a male thread. It is manufactured in accordance with individual client requirements. download pdf datasheet