Temperature surface and machinery sensors are specialized instruments designed to monitor the thermal conditions of solid components and industrial equipment to ensure operational safety and efficiency. Unlike immersion sensors that measure fluid temperatures, these devices utilize high-conductivity contact plates or magnetic mounts to detect heat directly from motor housings, bearing caps, and turbine shells. By providing real-time data on friction-induced heat or cooling system failures, they serve as a critical first line of defense in predictive maintenance, allowing operators to identify overheating risks before they lead to catastrophic mechanical failure or unplanned downtime.

Working Principles

The working principle of temperature surface sensors relies on the direct transfer of thermal energy via conduction from a solid surface to a sensing element, typically a Thermocouple or a Resistance Temperature Detector (RTD). When the sensor’s contact plate, often made of high-thermal-conductivity materials like silver or copper, is pressed against a machine surface, it reaches thermal equilibrium with that component. In an RTD-based sensor, this heat causes a predictable change in electrical resistance (based on the R vs. T relationship), while in a thermocouple, the temperature gradient between the junction and the reference point creates a small voltage known as the Seebeck effect. This electrical signal is then processed by a transmitter and converted into a readable temperature value, providing a non-invasive way to track the internal health of machinery by measuring its external thermal footprint.

Applications

In industrial and commercial settings, surface and machinery temperature sensors are vital for monitoring “hot spots” where internal probes cannot reach. Here are their primary applications:

  • Motor and Bearing Monitoring
  • HVAC and Refrigeration
  • Predictive Maintenance
  • Electronics and Circuit Boards
  • Food and Pharmaceutical Processing
  • Automotive Testing
  • Steam and Pipeline Systems

Showing 1–12 of 30 results

Cable Sensor Ex Surface measurement 400°C

In stock

SKU: -T--E-244-----
Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface. download pdf datasheet

Cable Sensor Machinery Ex 400°C acid resistant steel sheath

In stock

SKU: T--E-36--------
Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire. download pdf datasheet

Cable Sensor PT2 flat surface PVC Handgrip

In stock

SKU: PTR-2, PTR-3
Temperature sensor suitable for measurement of flat surfaces in a temporary or permanent way.Sensor with handgrip has lead wire finished with miniature plug adequate for joining with portable temperature meter. download pdf datasheet

Cable Sensor Surface measurement 400°C

In stock

SKU: ---TT-E-8
Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface. download pdf datasheet

Cable Sensor TAL2 surface magnet type

In stock

SKU: TOP-AL2, TTJ-AL2, TTK-AL2
Temperature sensor in Alnico type magnet suitable for measurement of steel surfaces. Magnet application enables quick and easy installation of sensor on steel surface where temperature is to be measured. download pdf datasheet

Cable Sensor TE 36 district heating compression fitting

In stock

SKU: TOPE-361, 362, TTJE-361, 362, TTKE-361, 362
Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. This Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire.

Cable Sensor TE 36 district heating, M8/M10 thread

In stock

SKU: TOPE-363, 364, 365, 366, TT(J/K)E-363, 364, 365, 366
Sensor suitable for temperature measurement in district heating substations. Applicable for temperature measurement of liquid and gaseous media in high pressure conditions. Sensor consists of sensing element placed in the thin-walled acid-resistant sheath with connector and flexible lead wire.  

Cable Sensor TE 462 movable parts, encl.

In stock

SKU: TOPE-462, TTJE-462, TTKE-462
Sensor suitable for temperature measurement of enclosures, movable parts and injection moulds.  

Cable Sensor TE 8/9 Machinery Motor Windings

In stock

SKU: TOPE-89, TONE-89
Sensor suitable for temperature measurement of motor windings. Sensor construction enables quick and easy installation.  

Cable Sensor TE11 Machinery

In stock

SKU: TTJE-11, 13, TTKE-11,13
Temperature sensor suitable for measurement of movable or replaceable parts of machines and devices, e.g. bearings or injection moulds. Equipped with bayonet fitting that enables quick and easy installation in the measured element. Furthermore, the sensor has a spring that protects the flexible cable. The cap of the bayonet fitting can be easily moved across the spring enabling the adjustment of sensor immersion length. download pdf datasheet

Cable Sensor TE243 with bandclamp

In stock

SKU: TOPE-243, TTJE-243, TTKE-243
Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured. download pdf datasheet

Cable Sensor TE244 with pipe bandclamp

In stock

SKU: TOPE-244, TONE-244, TTJE-244, TTKE-244
Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft. download pdf datasheet