Showing 253–264 of 405 results

Oval Wheel Meter OI

In stock

SKU: OI
The Bopp & Reuther Oval Wheel Meter Series OI is a heavy-duty, single-case positive displacement flow meter engineered for precise process monitoring, dosing, and custody transfer. Optimized with robust slide-bearing technology, this industrial-grade series excels at tracking highly complex fluids—from liquefied gases to hyper-viscous polymers—with minimal pressure loss and long-term calibration stability.
  • Low Differential Pressure: Uniquely constructed to displace ultra-viscous fluids smoothly while imposing virtually zero load or pressure drop on the pipeline.
  • Zero Pipe Conditioners Required: Insensitive to upstream flow disturbances, allowing installation immediately next to valves or bends to optimize skid design.
  • Custody Transfer Approvals: Engineered with high long-term stability and precise tolerances suitable for certified weights and measures billing applications.
  • Extreme Chemical Resistance: Available in a diverse assortment of body materials and specialty ball or slide bearings to withstand aggressive, non-lubricating, and pseudoplastic media.

Oval Wheel Meter OP

In stock

SKU: OP
The Series OP relies on the direct volumetric positive displacement principle driven entirely by fluid pressure. Inside the measuring chamber, two interlocking, toothed oval gears rotate in a counter-rotational pattern. Each revolution cleanly traps and transfers four discrete volumes of fluid past the chamber partition. A magnetic or proximity sensor reads the rotation of the gears, translating mechanical movements into highly accurate volume calculations unaffected by fluid velocity changes.
  • Premium Long-Term Stability: Solid cast metal configurations prevent physical distortion from process vibration, protecting accuracy over years of operation.
  • Zero Pipe Conditioning: Unaffected by velocity profiles or turbulence, removing the need for space-wasting straight upstream or downstream piping sections.
  • Explosion Protection: Engineered with options for intrinsically safe or flameproof designs to support safe operations in explosive atmospheres.
  • Viscosity Performance: Delivers superior measurement consistency with Newtonian fluids, from thin fuels to dense gear oils.

Overload Protector

In stock

SKU: SZ500-03
to protect from over pressure exceeding the specified pressure range by sudden & excessive pressure fluctuation from surges or spikes download pdf datasheet

OXYTRANS M Portable Oxygen Content Meter

In stock

SKU: Oxytrans M
Achieve absolute precision in mobile dissolved oxygen tracking across your liquid and gas process streams. High-end industrial plants, breweries, and bioreactors deploy the [Centec OXYTRANS M Portable Sensor](https://www.centec-sensors.co.uk/products/oxytrans-portable-oxygen-meter.html "Centec OXYTRANS M product page") to complete immediate quality audits. Because this advanced diagnostic tool utilizes quenched optical luminescence technology, it calculates ultra-precise Oâ‚‚ deviations without consuming oxygen or relying on electrolyte solutions. Consequently, your technical crew obtains rapid lab-grade data loops anywhere on the plant floor, ensuring uniform product preservation and preventing early oxidation degradation.

OXYTRANS TR In-Line Oxygen Content Transmitter

In stock

SKU: Oxytrans TR
Achieve absolute precision in your continuous dissolved oxygen tracking across active liquid and gas pipelines. Heavy-duty manufacturing facilities, large breweries, and industrial power plants deploy the Centec OXYTRANS TR Inline Sensor to complete uninterrupted process loops. Because this premium fixed-mount transmitter utilizes dynamic optical luminescence quenching technology, it calculates ultra-precise Oâ‚‚ deviations without consuming oxygen or relying on electrolyte chemical refills. Consequently, your facility gains real-time, automation-ready quality validation that eliminates product oxidation risk and prevents critical system corrosion downtime.

PAGU Diaphragm Absolute Low Pressure Gauges

In stock

SKU: PAGU

The Schmierer PAGU series is an analog absolute pressure gauge for low pressure applications with a robust stainless steel or custom-lined process connection. It handles corrosive, viscous or solid-containing media with an elastic diaphragm, with accuracy class 1.6.

Diaphragm pressure gauges with an open measuring flange are especially suitable for industrial pressure measurement in viscous media, crystallizing media and media containing solid particles. The robust design also allows effective protection against overpressure.

The basic design uses Stainless Steel 316Ti (Material W.1.4571) for the diaphragm across its pressure ranges. Titanium-stabilised 316 stainless steel provides superior corrosion resistance, making the PAGU better suited for harsh aggressive process mediums. 

PAKU Diaphragm Absolute Pressure Gauge

In stock

SKU: PAKU

The Schmierer PAKU is a diaphragm absolute pressure gauge: it measures pressure against a vacuum reference, so the reading does not change with the weather. The basic design has a Duratherm 600 diaphragm, 316Ti bellows, safety glass, a blow-out disc and a 304 stainless steel bayonet case, in 100 and 160 mm, accuracy class 1.6, 1/2″ BSP.

Diaphragm pressure gauges with an open measuring flange are especially suitable for industrial pressure measurement in viscous media, crystallizing media and media containing solid particles. The robust design also allows effective protection against overpressure.

PC400 Particle Counter in Compressed Air

In stock

SKU: Particle Counter PC 400

The CS Instruments PC 400 Particle Counter is a high-precision optical instrument designed to measure solid particle contamination in compressed air and industrial gases. It detects particles as small as 0.1 µm, helping users assess compressed air purity and monitor filtration performance.

Moreover, the PC 400 supports compressed air quality assessment according to ISO 8573-1. It helps identify filter breakthrough and unexpected particle contamination before these issues affect sensitive equipment or production processes.

Available in stationary and portable configurations, the PC 400 is suitable for continuous monitoring, maintenance inspections, and compressed air quality audits.

PCON-Y18 Advanced Documenting Automatic Pressure Calibrator

In stock

SKU: PCON-Y18
Maximize your industrial field productivity and eliminate manual hand pumping with the PCON-Y18. Expertly developed by Presys, this advanced automatic pressure controller and calibrator delivers autonomous, high-speed pressure generation. Furthermore, its robust dual-core processing engine coordinates fully automated calibration tasks, generating tamper-proof inspection reports straight from the machine interface to secure your quality auditing pipeline.

PCON-Y18-LP automatic low pressure calibrator – advanced documenting

In stock

SKU: PCON-Y18-LP
Achieve flawless tracking of subtle draft variables and protect cleanroom safety metrics with the PCON-Y18-LP. Specially developed by Presys, this high-precision automated low-pressure calibrator registers micro-pressure changes starting from fractions of a Pascal. Furthermore, its integrated oil-free electric air pump regulates targeted micro-scale pressures automatically, eliminating the control errors and measurement drift common when using manual hand pumps.

Phenolic Case Pressure Gauge PCU05

In stock

SKU: PCU05

The Schmierer Phenolic Case Pressure Gauge PCU05 provides reliable pressure measurement in demanding industrial environments. It uses a Bourdon tube sensing element to measure process pressure and display the reading on an easy-to-read dial. Its robust phenolic case and stainless steel wetted components make it suitable for selected aggressive process applications.

In addition, the PCU05 features a safety-oriented case design, a shatter-resistant safety glass window, and a dual bar/psi scale. The gauge can also be liquid-filled to help reduce pointer fluctuations caused by vibration and pulsating pressure.

PKU Heavy-Duty Industrial Diaphragm Pressure Gauge

In stock

SKU: PKU

The Schmierer diaphragm pressure gauge series PKU features a robust mechanical design utilizing a flexible internal membrane to reliably measure positive and negative pressures in industrial process applications. The standard basic design utilizes Duratherm 600 for the diaphragm (specifically for measuring ranges below 6 bar and at 40 bar). Duratherm is a specialized, high-strength cobalt-nickel-chromium alloy known for excellent elasticity and fatigue resistance for low-to-medium industrial pressure applications.

Diaphragm pressure gauges with an open measuring flange are especially suitable for industrial pressure measurement in viscous media, crystallizing media and media containing solid particles. The robust design also allows effective protection against overpressure.