Massflow Sensor RHM20 middle size 2.25 - 300 kg/min
Massflow Sensor RHM20 middle size 2.25 - 300 kg/min
Back to products
Massflow Sensor RHM40 middle size 12.5 - 1500 kg/min
Massflow Sensor RHM40 middle size 12.5 - 1500 kg/min
Click to enlarge
Rheonik

Massflow Sensor RHM30 middle size 5 – 750 kg/min

The RHM30 is available with a wide choice of material options to suit benign and aggresive applications. Heavy duty variants meet high pressure and high temperature needs while providing the highest accuracy performance.

PDF datasheet

0 People watching this product now!
SKU: RHM30 Categories: ,
Description

Description

TYPICAL APPLICATION RANGE 5 up to 750 kg/min
MAX. PRESSURE 798 bar / 11574 psi
TEMPERATURE -196 up to +400°C
ACCURACY 0.1% of rate
MATERIALS 316Ti
Alloy C22
SuperDuplex
Tantalum
more on request
PROCESS CONNECTIONS 1.5″ up to 4″
About Rheonik
More Information
Custody-Transfer-MID-H2-Coriolis_RHM-RHE
Hydrogen
Omegaflowmeterrange
Omega
Omegadescription
Omegadesign
chemicalinjectionoffshore
H2injection
H2trailerunloading

    Products & Features

    Rheonik Coriolis mass flow meters use a unique, patented "Omega" tube design with torsion rods and mass bars to directly measure mass flow, density, and temperature with high accuracy for gases and liquids.

    • Omega Tube Design: The distinctive "omega" shape of the measuring tubes is optimized for torsion, enhancing sensitivity and mechanical reliability.
    • Coriolis Force Measurement: Driven by electromagnetic coils, the tubes oscillate. As fluid flows through, the Coriolis force deflects the tubes, creating a phase shift (time delay) between the sensors, which is directly proportional to mass flow.

    Key Benefits:

    • High-Pressure & High-Temperature Capability: Designed to operate under extreme conditions (e.g., -200°C to 400°C and 900+ bar).
    • Versatile Applications: Suitable for liquids, sludge, and gases. 
    • High Accuracy: Suitable for custody transfer (OIML/NTEP).
    • Robustness: Excellent performance with entrained gas and high-viscosity materials.
    • Wide Rangeability: 100:1 turndown ratio is common.

    Related products

    Quick view

    Flap Flowmeter KFS spring loaded

    In stock

    SKU: KFS Flap
    The KFS spring loaded measuring device operates largely independent of viscosity and is suitable for indicating the flow rate of water, acids, alkaline solutions and gases. Every device is calibrated to customer requirement and fitted with a product-specific scale. The 50 mm thick ring features a half-round plate that is fastened to a rotating spring-loaded spindle. The angle between flap and ring changes according to the rate of flow, and a breakaway-proof magnetic coupling transfers the movement to an external pointer. download pdf datasheet
    Quick view

    Flap Flowmeter KLA

    In stock

    SKU: KLA Flap
    The KLA Flowmeter uses a flap which is deflected by the flow of the medium. The deflection angle is a direct indication of the flow through the pipe. The flap is gravity-loaded, thus the device can be used for the flow directions left to right, right to left and bottom to top. In the variant KLA-GS the medium be measured is directly visible through a glass in the flow indication unit. download pdf datasheet
    Quick view

    Massflow Sensor RHM015 small size 0.0015 – 0.6 kg/min

    In stock

    SKU: RHM015
    The RHM015 is perfect for extremely low flow applications where stability and accuracy are a must. With an application range starting at a few grams a minute, the RHM015L fits R&D and small pilot requirements. PDF datasheet
    Quick view

    Massflow Sensor RHM02 small size 0.02 – 2 kg/min

    In stock

    SKU: RHM02
    The RHM02 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must. PDF datasheet
    Quick view

    Massflow Sensor RHM03 small size 0.038 – 5 kg/min

    In stock

    SKU: RHM03
    The RHM03 is available with a wide selection of wetted materials and the highest pressure and temperature ratings in the market. It is suitable for all low flow applications where high accuracy is a must. PDF datasheet
    Quick view

    Massflow Sensor RHM12 middle size 0.75 – 100 kg/min

    In stock

    SKU: RHM12
    The RHM12 is a workhorse 1″ sensor used in every imaginable industry. Suitable for both continuous process and batching/filling applications, the RHM12 is a truly versatile tool for plant operations everywhere. PDF datasheet
    Quick view

    VA Flowmeter RA77/FA77 plastic tube – glass cone

    In stock

    SKU: RA77/FA77
    VA Flowmeter with plastic armature and borosilicate glass measuring cone Measuring units RA 77 and FA 77 are based on the variable area float principle. The flow meter consist of a PVC armature with a measuring cone made of borosilicate glass. With these design features the RA 77 / FA 77 devices combine the advantages of the classical VA flow meters with those of pure plastic measuring devices: Cost-effective, resistant against almost all aggressive media, as well as a high accuracy of the measuring glass, which can be calibrated to suit any requirement. Especially with water and aggressive media this design has proven itself. Therefore the RA 77 / FA 77 are frequently used in the chemical industry and in water treatment plants. By installation of electrical limit value switches, which are adjustable throughout the entire measuring range, this devices can be used as detectors. download pdf datasheet
    Quick view

    Vane Gasflow Anemometer Meter insertion type

    In stock

    SKU: Vane Flow insertion FA
    Flow rate and flow velocity in pipes and ducts, measuring flow profiles, aerodynamic research, measuring laminar flow, also at high gas temperatures, landfill gas, exhaust gas, flow rate and flow velocity in flowing waters. download pdf datasheet