Pressure Switches Economic Mini EPS-E-C-H

The Ensim EPS sub-series mini and high-pressure/temperature configurations extend the capabilities of the core mechanical pressure switch line. These targeted model families are engineered to address tight space restrictions (Mini/Compact versions) or severe fluid processing parameters like extreme hydraulic pressures and high heat ranges.

SKU: EPS mini Categories: ,
Description

Description

The Ensim EPS specialized segment provides compact, durable electromechanical pressure switching for space-constrained machinery and high-pressure fluid circuits. It features heavy-duty springs, compact hexagonal housings, and specialized materials designed for demanding industrial environments.

Models

  • EPS053-400E Mini: An economical brass pressure switch series covering setpoints from 0.5 to 400 bar.
  • EPS02C-400C Mini: An ultra-compact pressure switch series featuring zinc-nickel-plated housings for block manifolds and confined installation spaces. It covers setpoints from 0.2 to 400 bar.
  • EPS700H / EPS600H: Heavy-duty industrial pressure switches designed to monitor pressures up to 600 or 700 bar, depending on the model, for demanding hydraulic applications.

Technical Specifications

  • Pressure Ranges: Mini E-Series: 0.5 to 400 bar; Mini C-Series: 0.2 to 400 bar; H-Series: up to 600 or 700 bar, depending on the model.
  • Housing: Zinc-plated steel or AISI 304/316 stainless steel, depending on the configuration, with a compact hexagonal profile for installation in confined spaces.
  • Sensing Elements: Low-pressure models may use NBR, FKM, or EPDM diaphragms, while high-pressure models may use pistons with low-friction seals.
  • Electrical Contacts: SPDT (Single Pole Double Throw) microswitch contacts or compatible fast-acting terminals.
  • Process Connections: G 1/4, 1/4 NPT, or G 1/8 threaded connections for direct pipeline mounting or manifold integration, depending on the model.
  • Ingress Protection: Protection ratings of up to IP65 may be available with the appropriate connector and sealing accessories.

Working Principle

These pressure switches use a mechanical force-balance mechanism to actuate an electrical contact.

  1. Fluid Entry: Process fluid enters through the threaded connection and applies pressure to the internal diaphragm or piston.
  2. Spring Opposition: The applied pressure force opposes the force of an internal calibration spring.
  3. Switch Actuation: When the pressure reaches the preset switching point, it overcomes the spring force and moves the sensing assembly. This movement actuates the internal microswitch, triggering an alarm, compressor control sequence, or shutdown function.
  4. Reset: When the pressure falls below the reset point, the spring returns the mechanism to its original position. The difference between the switching point and reset point is known as hysteresis or switching differential.

Applications

  • Hydraulic Systems: Monitors pressure in heavy-duty hydraulic machinery and fluid circuits.
  • Manifold Integration: Fits into compact block manifolds where installation space is limited.
  • Compressor Control: Supports automatic compressor start/stop sequences based on system pressure.
  • Safety Equipment: Activates industrial alarms or initiates automated shutdown functions when pressure reaches a defined threshold.
About Ensim

Products & Features

Ensim Sensors from Turkiye provides a variety of level, flow, pressure and temperature instruments for liquids, solids and powders designed for demanding industrial environments in explosive environments for point detection (switches) or continuous monitoring (transmitters):
  • Radar Level: non-contact and guided wave sensors
  • Capacitive Level Sensors:
  • Magnetic By-pass and Visual Indicators
  • Hydrostatic
  • Ultrasonic
  • Magnetic Float 
  • Rotary Paddle, Vibrating Fork/Rod 
  • Flow Switches

Key Benefits

  • Rugged Construction, Reliability, Low Maintenance
  • Advanced Level Sensing: in dusty, humid, or smoky environments
  • Easy Integration: Designed for quick commissioning and simple installation into existing processes.Â