Thermal Mass FM SSEA-TMFIII

The SSEATMFIII is a compact or remote-type industrial gas flow meter featuring a robust, moving-part-free design that eliminates vibration interference and pressure sensor dependency. It is highly adaptive to factory automation and comes configured with a 4-line LCD display showing mass flow, volume flow, velocity, and totals.
  • Key Applications: Compressed air, combustion air flow, natural gas, greenhouse gas emissions, and gas leak detection.
  • Key Features: Digital stability, vibration resistance, long service life, and effortless maintenance.
SKU: SSEA-TMFIII Categories: ,
Description

Description

SSEATMFIII Thermal Mass Flow Meter

SSEATMFIII industrial thermal mass flow meter with LCD display

The SSEATMFIII Thermal Mass Flow Meter is available in compact and remote configurations for measuring industrial gas flow. Its design has no moving parts, helping reduce mechanical wear and maintenance requirements. It is suitable for factory automation and industrial gas monitoring applications.

The meter features a four-line LCD display that can show mass flow, volume flow, flow velocity, and totalized consumption, depending on the configuration.

Working Principle

The SSEATMFIII operates using the thermal dispersion principle with a constant temperature differential method.

  1. Temperature Sensing: The meter uses two platinum resistance temperature sensors positioned in the gas stream.

    SSEATMFIII thermal mass flow meter working principle illustration

  2. Reference Measurement: One sensor measures the actual process gas temperature, while the other acts as the heated sensor.
  3. Constant Temperature Difference: The heated sensor is maintained at a specified temperature above the process gas temperature.
  4. Heat Transfer: As gas flows past the heated sensor, it carries heat away from the sensor.
  5. Power Adjustment: The electronics adjust the electrical power supplied to the heater to maintain the required temperature difference.
  6. Mass Flow Calculation: The electrical power required to compensate for heat loss is used to determine the gas mass flow rate.

As gas flow increases, heat transfer generally increases. The meter uses this thermal relationship to calculate mass flow without requiring separate pressure and temperature compensation for the thermal measurement principle.

Technical Specifications

SSEATMFIII thermal mass flow meter model configurations

  • Measuring Medium: Various compatible gases, excluding acetylene according to the supplied specifications.
  • Pipe Diameters: DN10 to DN4000; suitable configurations support round and square ducts.
  • Flow Velocity Range: 0.1 to 100 Nm/s, as specified by the supplied product information.
  • Accuracy: ±1.0% or ±2.5%, depending on the model and configuration.
  • Operating Temperature:
    • Sensor: -40°C to +200°C.
    • Transmitter: -20°C to +45°C.
  • Maximum Working Pressure: Up to 1.6 MPa for insertion and flange sensor configurations. Special versions may be available.
  • Power Supply: 24 V DC or 220 V AC.
  • Power Consumption: ≤18 W for compact versions and ≤19 W for remote versions.
  • Response Time: Approximately 1 second, according to the supplied specifications.
  • Signal Outputs: 4–20 mA analog output and pulse output.
  • Communication: RS-485 and HART, depending on the configuration.
  • Alarm Configuration: One or two relay outputs may be available. Specified contact ratings are 10 A at 220 V AC or 5 A at 30 V DC; verify the ratings and applicable load conditions for the selected version.
  • Sensor Configurations: Flanged compact, threaded, standard insertion, and remote hot-tapped insertion types.
  • Construction Materials: Sensor body options include SS304 or SS316 stainless steel. Installation compatibility depends on the pipe material and selected connection.
  • Ingress Protection: IP65 enclosure rating, according to the supplied specifications.
  • Explosion Protection: The supplied classification is Ex d IIC T Gb. Confirm the exact certification marking and suitability for the intended hazardous area before installation.

Industrial Applications

  • Compressed Air and Gas Monitoring: Measure gas consumption in industrial pipelines and distribution networks.
  • Combustion Air Flow: Monitor combustion air flow in compatible industrial systems.
  • Natural Gas Measurement: Monitor natural gas flow when the selected model is suitable for the gas, pressure, temperature, and installation conditions.
  • Greenhouse Gas Emissions: Measure compatible gas flows as part of industrial monitoring and emissions management systems.
  • Factory Automation: Transmit flow measurements to compatible control and monitoring systems through supported signal outputs and communication interfaces.
About SSEA

SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.

SSEA instruments by family

FamilySSEA productsStated figures
Pressure gaugesSRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gaugeSRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial
Test pressure gaugesSRU15 test gauge, SFU 15, SF 15250 mm dial
Gauge accessoriesSyphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointerSee product pages
Electrical pressurePTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gaugePTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar
Pressure calibrationIDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pumpIDTG 100: -1 to 600 bar
TemperatureSTU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowellsSTU02 bimetal thermometer to EN 13190
Flow metersCMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonicSee product pages
Water qualityDigital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllersSee product pages

How to choose within the range

  • General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
  • Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
  • Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
  • A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
  • Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.

Service in Shah Alam

Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.

Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.