Pressure Gauge Contact Options

Schmierer pressure gauge contact options combine local pressure indication with electrical switching. They help operators monitor pressure limits and automate industrial processes. Moreover, they can trigger alarms, start or stop pumps, and send signals to control systems. Therefore, they are suitable for applications that require reliable pressure monitoring and control.

  • Slow action contacts for standard applications
  • Snap action w. magnets (not affected by vibration areas)
  • Electronic 3 wire PNP switch for connection with PLC
  • Inductive: non touching proximity switch for EEx applications

Transmitter are available as built in or added version for 0/4-20 mA output

SKU: contact device Categories: ,
Description

Description

Schmierer Pressure Gauge Contact Options – Electrical Switching and Monitoring

Contact Types and Available Options

1. Slow-Action Contacts

Slow-action contacts provide conventional electrical switching for standard industrial applications. They open or close an electrical circuit when the pressure pointer reaches a preset limit. Consequently, they are suitable for basic alarm and control functions.

2. Magnetic Snap-Action Contacts

Magnetic snap-action contacts use a magnetic mechanism to produce rapid switching. In addition, the magnetic action helps reduce contact bounce and supports reliable operation. These contacts are useful in applications where pressure fluctuations or vibration may affect switching performance.

3. Electronic Contacts

Electronic contacts use a non-contact sensing mechanism. Schmierer SEA lists a three-wire PNP electronic contact option for PLC connections. As a result, these contacts can provide switching signals for automation and monitoring systems.

4. Inductive Contacts

Inductive contacts detect position without direct mechanical contact. They are designed for suitable applications in potentially explosive atmospheres when used with the required compatible equipment and approvals. Therefore, users should confirm the applicable hazardous-area certification before installation.

Key Specifications and Configurations

  • Contact Types: Slow-action, magnetic snap-action, electronic and inductive.
  • Set Points: Available configurations include single and multiple switching points, depending on the model.
  • Adjustability: Switching values can be set externally on compatible versions.
  • Control Integration: Contact signals can connect to suitable alarm circuits and automation systems.
  • Transmitter Options: Selected configurations can include built-in or add-on transmitters with 0/4–20 mA output.
  • Accessories: Junction boxes, contact protection relays and isolating amplifiers may be available, depending on the configuration.

Note: Contact availability, switching capacity, mounting dimensions and approvals depend on the selected pressure gauge and contact system. Confirm the exact specifications with Schmierer before ordering.

Working Principle

A Schmierer contact pressure gauge measures process pressure using its mechanical measuring element. The pointer moves across the dial to indicate the actual pressure. Meanwhile, an adjustable contact monitors a preset limit.

When the pointer reaches the configured switching point, the contact changes its electrical state. Consequently, the connected system can activate an alarm, operate a relay or initiate a control action. The gauge therefore provides both local pressure indication and electrical switching in one instrument.

Advantages

  • Local Indication and Switching: Operators can read pressure while monitoring preset limits.
  • Improved Process Monitoring: Contacts can trigger high-pressure or low-pressure alarms.
  • Automation Support: Compatible contacts can interface with PLCs and control circuits.
  • Flexible Configurations: Different contact types suit different operating conditions.
  • Reduced Response Delay: Snap-action mechanisms support rapid switching.
  • Special-Area Options: Compatible inductive contacts can support approved hazardous-area installations.

Applications

Schmierer pressure gauges with electrical contacts are suitable for:

  • Oil and gas processing
  • Chemical and petrochemical plants
  • Water and wastewater treatment
  • Pump and compressor monitoring
  • Industrial machinery
  • Power generation
  • Process automation and alarm systems

Choosing the Right Contact Option

Choose slow-action contacts for standard switching tasks. However, consider magnetic snap-action contacts when rapid switching is preferred. For PLC inputs, evaluate the electronic PNP option. For potentially explosive atmospheres, select an appropriately certified inductive system and compatible interface equipment.

Ultimately, the correct choice depends on the pressure range, switching load, operating environment, vibration level and control-system requirements.

About SSEA

SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.

SSEA instruments by family

FamilySSEA productsStated figures
Pressure gaugesSRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gaugeSRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial
Test pressure gaugesSRU15 test gauge, SFU 15, SF 15250 mm dial
Gauge accessoriesSyphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointerSee product pages
Electrical pressurePTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gaugePTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar
Pressure calibrationIDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pumpIDTG 100: -1 to 600 bar
TemperatureSTU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowellsSTU02 bimetal thermometer to EN 13190
Flow metersCMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonicSee product pages
Water qualityDigital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllersSee product pages

How to choose within the range

  • General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
  • Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
  • Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
  • A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
  • Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.

Service in Shah Alam

Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.

Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.