Dryblock Temp. Calibrator TE

• The TE-350P, TE-650P and TE-1200P Dry Block Calibrators perform functions that would require three different types: a dry block, standard thermometer and a calibrator for RTDs, TCs, mA, mV, ohms and thermoswitches.
• Model TE-1200P generates temperature from 50 °C up to 1200 °C. The TE-350P and TE-650P models generate from ambient temperature to 350 °C and 650 °C respectively.
• Stability of ± 0.03 °C for the TE-350P and TE-650P and ±0.1 °C for the TE-1200P model.
• Internal regulated 24 Vdc power supply and mA input for 2-wire transmitters.
• Completely automatic calibration with or without the use of a computer (auto-cycling).
• Documenting capabilities: connection with computer and ISOPLAN® calibration software.
• The TE-1200P allows the use as a black body target for infrared thermometers.

The TE-350P, TE-650P and TE-1200P models control temperature over an insert in order to calibrate thermocouples, thermoresistances, glass thermometers, thermoswitches etc. Besides that, the TE-1200P model may work as a black body source. Besides providing high accuracy temperature values, they also allow the measurement of signals generated by the thermocouples, thermoresistances and thermoswitches, which are being calibrated. This possible due to an embedded calibrator specific for these types of signals, including 4-20 mA. They incorporate the function of dry block, standard thermometer and calibrator for RTD and TC sensors, besides mA reading. They present a wide range of programming resources, allowing them to perform automatic calibration of the sensors, with or without the use of a computer. With ISOPLAN® it is possible to register sensors and instruments of the factory, generate work orders, create and print calibration certificates and reports, i.e., it brings all the advantages of computer data management to the calibration environment.