Pressure

Bourdon Tube
7 products
Boiler
2 products
Chemical
3 products
Phenolic
1 product
Differential
7 products
Capsule
3 products
Test Pressure Gauge
5 products
Contact
4 products
Diaphragm
3 products
Diaphragm Seal
1 product
Digital
2 products
Pressure Transmitter
10 products
Pressure Switch
5 products
Load and Force
11 products
Accessories
15 products
Temperature

RTD
5 products
Bimetallic
2 products
Gas Filled
2 products
Non-Replaceable Inserts
3 products
Replaceable Inserts
4 products
Ceramic Protection
7 products
Mineral Insulated
4 products
Flameproof and Intrinsically Safe
7 products
Surface and Machinery
30 products
Food and Pharma
7 products
HVAC
9 products
Acids, Alkalis, Salts
4 products
Temperature Switch
1 product
Thermowell
16 products
Indicator, Controller
8 products
Accessories
9 products
Humidity
7 products
Thermocouple
50 products
Cable Sensors
38 products
Head Sensors
9 products
High Temperature
6 products
Temperature Transmitter
6 products
Flow

Electro Magnetic
2 products
Vortex
3 products
Swirl
1 product
Ultrasonic
7 products
Coriolis Mass Flowmeter
28 products
Positive Displacement
6 products
Variable Area
1 product
Differential Pressure
7 products
Turbine
4 products
Flap
1 product
Side Glass
1 product
Thermal gas
5 products
Air Flow/Quality
11 products
Flow Switch
9 products
Flow Computer
3 products
Flow Accessories
2 products
Dosing/Batching
6 products
Level

Radar
3 products
Ultrasonic
1 product
Capacitance
7 products
Conductivity
4 products
Magnetic
1 product
Float/Buoyancy
7 products
Level Indicator
3 products
Vibrating Rod
3 products
Rotary Paddle
2 products
Hydrostatic
2 products
Optical
1 product
Level Switches
11 products
Calibration Devices

Multi Function Calibrators
2 products
Pressure Calibrators
4 products
Temperature Calibrators
6 products
Valve Testing
1 product
Calibration Software
1 product
Valves

Actuator
1 product
Ball Valves
2 products
Butterfly Valves
3 products
Gate Valves
2 products
Globe Valves
3 products
Analytical Sensors

Water Quality Sensors
16 products
Process Systems
11 products
Density and Concentration
12 products
Analytical Controller
2 products
Process Systems
SZ500-01 Cooling Tower for Pressure Gauges
The Schmierer SEA Cooling Tower is a pressure instrument accessory designed to protect pressure gauges, pressure switches, and pressure transmitters from excessive process temperatures. It is installed between the process connection and the pressure instrument to help dissipate heat before it reaches the instrument.
In addition, the cooling tower helps reduce pressure pulsations. Its stainless steel construction makes it suitable for compatible clean air, gases, and non-crystallizing liquids. The product is available in three designs: CT1 Perforated, CT2 Fin Type, and CT3 Capillary.
SKU:
SZ500-01
Categories: Accessories, Pressure
Description
Description
Key Features Schmierer SEA Cooling Tower – Pressure Instrument Protection
- Stainless steel construction: Provides a durable connection for compatible industrial process applications.
- Three design options: Available in CT1 Perforated, CT2 Fin Type, and CT3 Capillary configurations.
- Heat dissipation: Helps reduce the temperature transferred from hot process media to pressure instruments.
- Pressure pulsation reduction: Helps dampen process pressure fluctuations.
- Wide instrument compatibility: Designed for use with pressure gauges, pressure switches, and pressure transmitters.
- Standard connections: Features a 1/2-inch BSP male process connection and a 1/2-inch BSP female instrument connection.
- High-temperature capability: CT1 and CT2 support operating temperatures up to 220°C, while CT3 supports up to 150°C.
Working Principle
The cooling tower is installed between the process line and the pressure instrument. When hot fluid or vapour enters the connection, the cooling tower helps dissipate heat to the surrounding environment before it reaches the instrument.
Its design also helps reduce the transmission of pressure pulsations. As a result, it can help protect sensitive instrument components from excessive heat and fluctuating process pressure.
The CT1 Perforated, CT2 Fin Type, and CT3 Capillary designs provide different construction options. Select the appropriate type according to the operating temperature, process medium, installation conditions, and instrument requirements.
Technical Specifications
- Product: Cooling Tower
- Manufacturer: Schmierer SEA
- Model / SKU: SZ500-01
- Available types: CT1 Perforated, CT2 Fin Type, CT3 Capillary
- Construction material: AISI 316 stainless steel
- Process connection: 1/2-inch BSP male
- Instrument connection: 1/2-inch BSP female
- Maximum operating temperature: CT1 and CT2: up to 220°C; CT3: up to 150°C
- Suitable media: Clean air, gases, and non-crystallizing liquids
- Primary function: Heat dissipation and pressure pulsation reduction for pressure instruments
Note: Maximum temperature depends on the selected type. Confirm pressure rating, medium compatibility, and any additional installation limits with the manufacturer before ordering.
Applications
- Industrial pressure measurement: Helps protect pressure gauges connected to hot process lines.
- Steam and hot vapour systems: Helps reduce heat transfer to compatible pressure instruments.
- Process plants: Suitable for selected pressure monitoring points in chemical and manufacturing facilities.
- Pressure switch installations: Helps protect pressure switches from excessive process temperature.
- Pressure transmitter installations: Provides an intermediate heat-dissipating connection for compatible transmitters.
Benefits of the Schmierer SEA Cooling Tower
- Improved instrument protection: Helps limit exposure to excessive process heat.
- Potentially longer instrument service life: Reducing thermal stress can help protect compatible pressure instruments.
- More stable pressure indication: Pressure pulsation reduction can help limit fluctuations at the instrument.
- Corrosion-resistant construction: AISI 316 stainless steel supports use in suitable industrial environments.
- Flexible selection: Three design types allow selection based on application requirements.
Conclusion
The Schmierer SEA Cooling Tower SZ500-01 is a practical accessory for protecting compatible pressure instruments from high process temperatures and pressure pulsations. Choose the correct design and temperature rating to match your application.
About SSEA
SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.
SSEA instruments by family
| Family | SSEA products | Stated figures |
|---|---|---|
| Pressure gauges | SRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gauge | SRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial |
| Test pressure gauges | SRU15 test gauge, SFU 15, SF 15 | 250 mm dial |
| Gauge accessories | Syphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointer | See product pages |
| Electrical pressure | PTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gauge | PTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar |
| Pressure calibration | IDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pump | IDTG 100: -1 to 600 bar |
| Temperature | STU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowells | STU02 bimetal thermometer to EN 13190 |
| Flow meters | CMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonic | See product pages |
| Water quality | Digital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllers | See product pages |
How to choose within the range
- General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
- Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
- Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
- A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
- Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.
Service in Shah Alam
Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.
Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.
Related products
KWU Stainless Steel Low-Pressure Capsule Gauges
In stock
SKU:
KWU Capsule PG
The Schmierer capsule pressure gauge series KWU is a fully stainless steel, low-pressure analog instrument featuring a titanium-stabilized capsule element (SS 316Ti), designed for precise micro-pressure and vacuum measurement of dry, clean, non-corrosive gaseous media.
They are commonly used for low pressure measurement and vacuum in applications such as ventilation and air conditioning systems, filter monitoring, gas supply systems, laboratory and environmental technology, pneumatic systems.
Overload Protector
In stock
SKU:
SZ500-03
to protect from over pressure exceeding the specified pressure range by sudden & excessive pressure fluctuation from surges or spikes
download pdf datasheet
PAGU Capsule Absolute Low Pressure Gauges
In stock
SKU:
PAGU
The Schmierer PAGU series is an analog absolute pressure gauge for low pressure applications with a robust stainless steel or custom-lined process connection. It handles corrosive, viscous, or solid-containing media safely via an elastic diaphragm capsule, offering an accuracy class of 1.6% across demanding industrial applications
Diaphragm pressure gauges with an open measuring flange are especially suitable for industrial pressure measurement in viscous media, crystallizing media and media containing solid particles. The robust design also allows effective protection against overpressure.
The basic design uses Stainless Steel 316Ti (Material W.1.4571) for the diaphragm across its pressure ranges. Titanium-stabilised 316 stainless steel provides superior corrosion resistance, making the PAGU better suited for harsh aggressive process mediums.ÂPAKU Diaphragm Absolute Pressure Gauge
In stock
SKU:
PAKU
The Schmierer diaphragm absolute pressure gauge series PAKU features a robust mechanical design utilizing a flexible internal membrane to reliably measure positive and negative pressures in industrial process applications. The standard basic design utilizes Duratherm 600 for the diaphragm (specifically for measuring ranges below 6 bar and at 40 bar). Duratherm is a specialized, high-strength cobalt-nickel-chromium alloy known for excellent elasticity and fatigue resistance for low-to-medium industrial pressure applications.
Diaphragm pressure gauges with an open measuring flange are especially suitable for industrial pressure measurement in viscous media, crystallizing media and media containing solid particles. The robust design also allows effective protection against overpressure.







