SZ500-M10 3-Valve Differential Pressure Manifold

Streamline your differential pressure measurement systems with the Schmierer SEA SZ500-M10. Expertly engineered by Schmierer SEA, this heavy-duty 3-valve manifold delivers absolute measurement isolation and seamless process control. Furthermore, its robust design facilitates safe on-line instrument servicing, calibration adjustments, and stable process balancing without interrupting the primary flow line.

SKU: SZ500-M10 Categories: ,
Description

Description

Key Features & Benefits

  • Optimized 3-Valve Architecture: Features two dedicated process isolation bonnets flanking an angular equalizing bonnet on top for clear mechanical control.
  • Hard Chrome Plated Stem Tips: Employs a robust Type CT stem design with a conical metal tip press-fitted with hard chrome plating to avoid thread galling.
  • Flexible Process-to-Instrument Layout: Combines dual threaded horizontal port inlets on the front side with two secure flange outlets on the back side.
  • Advanced Alloy Adaptability: Engineered in various materials, including Super Duplex SS, Inconel 625, Monel, and Hastelloy C, to survive severe chemical environments.

Working Principle

The SZ500-M10 coordinates a three-valve block layout to route differential high and low-pressure streams to your tracking telemetry. Under standard operating parameters, the two side isolation valves remain open, allowing the flow variables to reach the transmitter, while the central equalizing valve stays closed. When operators need to adjust or service the instrument, they close the two main block valves to isolate the downstream system from the pipeline forces. Next, opening the equalizing valve balances the internal forces across the transmitter capsule, allowing technicians to verify zero calibration parameters safely without spilling process fluid.

Advantages

  • 6000 PSI High Pressure Resilience: Operates flawlessly under intense pressure loads, maintaining system boundary integrity up to 400 bar.
  • Zero-Fugitive Emission Packing: Utilizes standard premium PTFE or optional heavy-duty Grafoil gland seals to handle temperatures up to 240°C.
  • Anti-Tamper Customization Options: Available with an optional anti-tamper bonnet design featuring a built-in locking arrangement on request.
  • Severe NACE Compliance: Offers fully auditable material test certificates and tested compliance options following standard NACE MR-0175 regulations.

Technical Specifications

Specification Parameter Value Details
Model Tiers Schmierer SEA SZ500-M10 Series (3-Valve Manifold)
Standard Material Configuration SS 316 Body, SS 316 Stem, SS 316 Valve Assembly, SS 304 T-Bar Handle
Alternative Metal Material Options Carbon Steel, SS 304, SS 316L, Monel 400/500, Hastelloy C, Inconel 625, Super Duplex SS
Maximum Working Pressure 6000 PSI / 400 bar capacity
Maximum Operating Temperature Up to 240°C thermal limit
Standard Connections 1/2″ NPT Female Inlets (Process) x Flange Outlets (Instrument Side)
Alternative Sizing Matrix 1/4″ Flange or 1/2″ Flange options
Integrated Drain Port 1/4″ NPT Female port with SS 316 protective plug (Not available in 3VA series)
Thread Forms NPT (ANSI B 1.20.1), BSPP (BS 2779, ISO 228/1), BSPT (BS 21, ISO 7/1)
Optional Accessories Oxygen Service Cleaning (SG), Delrin Soft Needle Gas Tips (DS), Circular Handles (IE), Mounting Brackets & Bolts

Applications

  • Differential Pressure Transmitter Isolation: Serves as the primary direct-mount interface for remote flow and differential pressure indicators.
  • Refinery Processing Loops: Controls aggressive hydrocarbon media flow arrays using certified NACE compliance metals.
  • Chemical & Industrial Gas Distribution: Regulates system equalization in nitrogen, clean air, and process vapor tracing lines.
  • Power Generation Utility Skids: Monitors liquid level loops across steam headers and feed-water storage drums.
About SSEA

SSEA instruments are Schmierer SEA's own range, offered from Shah Alam and led by pressure gauges. The SRU 25 stainless steel pressure gauge uses a silicon-jelly stabiliser instead of liquid filling and is rated IP66. The STU02 bimetallic thermometer is built to EN 13190. Gauge accessories, flow meters, water quality sensors and calibration tools complete the range.

SSEA instruments by family

FamilySSEA productsStated figures
Pressure gaugesSRU 25, SRU 25X with mini diaphragm seal, SRU 35, SR 01; SRU25 chemical gauges in Hastelloy, Monel and Inconel; SRU15 and SR15 boiler gauges; PCU05 phenolic case gaugeSRU 25: -1 to 100 bar, special versions up to 1,600 bar; 1% fsd with the 100 mm dial
Test pressure gaugesSRU15 test gauge, SFU 15, SF 15250 mm dial
Gauge accessoriesSyphons, cooling tower, snubbers, overload protectors, gauge cocks, shut-off valve, 3-way, 3-valve and 5-valve manifolds, swivel adapter, max drag pointerSee product pages
Electrical pressurePTX-36 gauge transmitter, SSEA-PTIII transmitter, DTG200 digital gaugePTX-36: 4–20 mA, dial still reads in a power failure; DTG200: -1 to 2,500 bar
Pressure calibrationIDTG 100 pressure calibrator, HPCP-700 hydraulic comparison pumpIDTG 100: -1 to 600 bar
TemperatureSTU02 bimetallic and STU01 gas filled thermometers, STW bar-stock thermowellsSTU02 bimetal thermometer to EN 13190
Flow metersCMF VIII Coriolis, MFIII electromagnetic, VFIII vortex, SWFVI swirl, TMFIII thermal mass, OGMFIII oval gear, VAFIII variable area, WMIII, TFLIII and TFGIII turbine, UCOF and UFP-1.0 clamp-on ultrasonicSee product pages
Water qualityDigital sensors for pH, dissolved oxygen, conductivity, turbidity, suspended solids, COD, ammonia nitrogen, nitrate, free chlorine, oil in water, blue-green algae, transparency and colour; MPSX sonde, HMSX handheld meter, MPTX and DCCX controllersSee product pages

How to choose within the range

  • General industrial duty: the SRU 25, all stainless steel with an SS316L tube and socket.
  • Corrosive or viscous media: the SRU 25X with its mini diaphragm seal, or an SRU25 chemical gauge.
  • Pressure testing and reference readings: a 250 mm test gauge, or the DTG200 digital gauge.
  • A reading in the control room: the PTX-36 sends 4–20 mA and keeps its local dial.
  • Temperature on a dial: the STU02 bimetallic or STU01 gas filled thermometer, with an STW thermowell where the stem needs protection.

Service in Shah Alam

Common pressure and temperature gauges are kept in warehouse stock. Our trained technical staff calibrate pressure, temperature and flow instruments in-house and on site. Our diaphragm seal filling station, in Shah Alam since June 2016, assembles seals for gauges, switches and transmitters of any brand.

Send the medium, range and connection and we will match one of our SSEA instruments: send an enquiry. The full gauge line-up is on the pressure gauge page.