ATEX High-Temperature Noble-Metal Thermocouples

Measure extreme furnace temperatures up to +1700°C safely inside explosive hazardous zones. Therefore, petrochemical refineries, chemical reactors, and high-heat process engineers deploy Limatherm TTSC-22Exi, TTRC-22Exi, and TTBC-22Exi thermocouples. Specifically, they rely on these ATEX-certified probes for continuous temperature tracking in Zone 0, Zone 1, or Zone 20 hazardous areas. Because these sensors combine platinum-rhodium elements with dense Mullite C610 or Corundum C799 ceramic tubes, they resist extreme heat and aggressive gases. Furthermore, their intrinsically safe design prevents ignition sparks completely. Consequently, your facility achieves strict ATEX regulatory compliance. As a result, you maintain accurate thermal control across volatile production lines.

SKU: TTSC-22Exi TTRC-22Exi TTBC-22Exi Categories: , , , ,
Description

Description

Product Types

The TTSC-22Exi, TTRC-22Exi, and TTBC-22Exi platform maps into three noble-metal configurations. Thus, you can match your exact hazardous furnace temperature limits:

  • TTSC-22Exi (Type S – PtRh10-Pt): Uses a 10% rhodium-platinum alloy element per EN 60584. Therefore, it provides continuous intrinsically safe monitoring up to +1600°C.
  • TTRC-22Exi (Type R – PtRh13-Pt): Features a 13% rhodium-platinum alloy core. Consequently, it delivers higher thermoelectric output and stability up to +1600°C.
  • TTBC-22Exi (Type B – PtRh30-PtRh6): Built with a 30% / 6% rhodium-platinum junction. Thus, it handles ultra-high hazardous temperatures up to +1700°C continuous (+1800°C peak).

Working Principle

The sensor operates continuously using noble-metal junctions sealed inside a gas-tight ceramic tube within an intrinsically safe circuit. First, radiant and convective heat transfers cleanly through the Mullite C610 or Corundum C799 protection sheath. As a result, dense ceramic walls block toxic furnace vapors from contaminating the platinum wires. Next, the noble-metal measuring junction captures extreme temperature shifts instantly. Thus, it generates a precise thermoelectric millivolt signal. Furthermore, the Type AA connection head routes this low-energy signal through an approved Ex i barrier. Finally, your safe-area PLC receives drift-free readings without any ignition risk.

Key Specs

Technical Parameter Manufacturer Specification
Explosion Protection ATEX / IECEx Certified Intrinsically Safe (Ex ia IIC / Ex ia IIIC) for Gas & Dust Zones
Noble-Metal Elements Type S (TTSC-22Exi), Type R (TTRC-22Exi), Type B (TTBC-22Exi) per EN 60584-1
Temperature Range 0°C to +1600°C (Type S/R) / +600°C to +1700°C continuous (+1800°C peak)
Protection Tube Gas-tight Mullite C610 (up to +1500°C) or Corundum C799 (up to +1700°C)
Outer Diameters 10 mm, 12 mm, 15 mm, 20 mm, or 24 mm ceramic tubes with metallic holding neck
Connection Head Heavy-duty cast aluminum Type AA head with certified Ex cable gland entry

Product Models & Functional Configurations

The Limatherm TTSC-22Exi, TTRC-22Exi, and TTBC-22Exi catalog offers tailored constructions. Moreover, it includes verified hazardous-area electronics options:

  • Mullite C610 vs. Corundum C799 Sheaths: Configured with Mullite C610 tubes for high thermal shock resistance up to +1500°C, or Corundum C799 tubes for extreme heat up to +1700°C.
  • Single or Double Tube Build: Available with a single ceramic sheath or a double-tube assembly. Consequently, the inner ceramic tube maximizes gas tightness and mechanical strength.
  • Mounting Flanges & Holding Necks: Paired with heat-resistant steel necks, sliding flanges, or threaded bushings. Thus, technicians set exact reactor wall immersion depths cleanly.
  • Terminal Block or AP-Ex Transmitter: Equipped with a ceramic block for direct Ex i wiring, or an AP-Ex head transmitter. As a result, it outputs an intrinsically safe 4–20 mA or HART loop.

Advantages

  • ATEX / IECEx Hazardous Zone Safety: Certified Ex ia circuitry limits electrical and thermal energy strictly. As a result, you monitor ultra-high temperatures safely inside explosive gas and dust atmospheres.
  • Extreme Heat Endurance up to +1700°C: Platinum-rhodium junctions and Corundum C799 sheaths operate reliably where base-metal probes fail. Therefore, your plant maintains uninterrupted process control.
  • Gas-Tight Contamination Shielding: Dense ceramic walls block reducing gases and metallic vapors from poisoning the thermoelements. Consequently, you prevent calibration drift and extend service life.
  • Spacious Type AA Connection Head: The rugged aluminum housing offers ample internal clearance. Thus, technicians install double-element blocks or Ex-certified transmitters effortlessly.

Applications

Process safety and thermal engineers integrate Limatherm TTSC-22Exi, TTRC-22Exi, and TTBC-22Exi thermocouples across hazardous high-heat environments:

  • Petrochemical Cracking Furnaces: Monitors extreme firebox and reactor tube temperatures safely inside Zone 1 or Zone 2 areas.
  • Chemical Thermal Oxidizers & Incinerators: Tracks high-heat combustion chambers handling volatile organic compounds and flammable vapors.
  • Hydrogen & Syngas Reformers: Supervises continuous catalytic reforming zones up to +1700°C with strict intrinsic safety.
  • Hazardous Waste & Coal Gasification Kilns: Delivers drift-free temperature feedback inside combustible dust and gas processing lines.
About Limatherm

Products & Features

Limatherm specializes in industrial temperature measurement and control solutions. Core Products & Services are 

  • Temperature Sensors: wired and head sensors, mineral-insulated (sheathed) RTD and Thermocouples
  • Hazardous Area Solutions: intrinsically safe (Exia) and flameproof (Exd) 
  • Accredited Laboratory: acc. to ISO/IEC 17025 standard
  • High-Temperature Patent:  up to 2300°C
  • Material Diversity: acid-resistant steel, borosilicate glass, ceramics (e.g., Hexoloy)

Key Benefits

  • Reliability in Extreme Environments: Suitable for high-temperature and harsh conditions (e.g., molten metal, acidic environments).
  • Adaptability: Suitable for diverse industries such as metallurgy, chemical processing, and food production.
  • Easy Installation: Features like replaceable inserts and flexible mineral-insulated cables reduce maintenance time and cost.