The Presys multi-function Process Calibrator MCS-XV with all instrumentation signals: electrical, temperature, frequency and pressure

• Measures and generates mA, mV, Volts, Ohms, RTD, TC, Hz.
  
• Up to four pressure sensors of ranges from 250 mmH₂O to 10,000 psi.
  
• Full-Hart Configurator.
  
• Ethernet, Wi-Fi, Pen-drive, Hart and USB Host/Device.

The T-PH dry block calibrator series from Presys controls temperature of an insert in order to calibrate thermocouples, thermoresistances, glass thermometers, thermoswitches and infrared pyrometers:

• Generates temperatures from ambient up to 650 °C or 1200 °C
  
• Dry Block and Black Body Inserts
  
• Horizontal mounting facilitates infrared thermometer calibration
  
• Automatic calibration and documentation facilities

The Dry Block Calibrators economic line from Presys perform functions that would require three different types: a dry block, standard thermometer and a calibrator for RTDs, TCs, mA, mV, ohms and thermoswitches for a temperature up to 1200°C.

The super thermometer ST-501 measure temperatured with high accuracy, ( resolution of 0.001 °C).  It uses platinum resistance thermometers sensors and it also accepts standard thermocouples. The digital electronic indicator can be offered complete including the temperature sensor and calibration certificate of the pair.

The PRESYS Digital Multi-Point Indicator/Controller DMY-2015 with up to 12 inputs for monitoring process variables found in industrial plants, such as, flow, level etc.,as well as totalization of voltage and current linear inputs. It has non-volatile internal memory (E2PROM) to store calibration values. Its accuracy is warranted by autocalibration techniques based on a high thermal stability voltage reference.

The Presys PSV Workstations are transportable, compact, digital, and easy to operate stations for the testing and calibration of all sorts of Pressure Safety/Relief Valves in the range of ½” – 10″ and up to 5000 psig (350 bar).

The unique digital registration system allows the automatic detection of the set pressure and the reseating pressure.

The Workstations communicate with the Isoplan® Calibration Software to produce complete documented calibration and test reports.

The Presys PCON Pressure Calibrator Y18 provides a complete solution for test and calibration of pressure gauges, transmitters and pressure switches. Automatic tasks can be easily created and executed to issue a fnal calibration report. It communicates and integrates easily with your existing application or your CMMS computerized maintenance management system.

As regional business partner for a variety of European I&PC manufacturers Schmierer SEA will be at the OGA 2023:

Venue:   KL Convention Center

Place:   Hall 4 - booth 4603

Date:     13 - 15 September

The Presys intrinsically safe multi-function Process Calibrator MCS-XV-IS with all instrumentation signals: electrical, temperature, frequency and pressure

• Up to four pressure sensors from 250 mmH2O to 10.000 psi, opt barometric reference
  
• Touch Screen with  2 simultaneous variables, intuitive navigation
  
• Full Hart configurator (optional), which configures all available HART® devices, with DD library from FieldComm Group
  
• Data Logger function for data acquisition and graphical visualization
  
• Wi-Fi, Pen drive, Hart®, USB connection Host / Device.
  
• Automated calibrations and generation of calibration report (PDF or with connected USB printer)

PDF Datasheet

The SRU25X lightweight, stainless steel pressure gauge with heavy duty mini diaphragm seal is the ideal choice for

• corrosive, viscous, sedimentous process media
• with a high temperature
• or high pressure

The diaphragm is AISI 316L welded to the body to ensure separation of the filling fluid from the process medium.