The DX-EFSs high precision flowswitch from Ensim detects flow or no flow of water, lubricating oils, gases and aggressive media inside a pipe without the need of cooling the liquid:

• high precision
• easy assembly and adjustment
• explosion proof, CE certified
• relay circuit contactless with liquid
• low pressure drop

Small Rheonik Coriolis Mass Flowmeters with 5 mm pipe size are the ideal choice for AC coolant and refrigerant filling:

• fast filling cylces
• excellent filling performance, accuracy and repeatability
• compact design - easy retro fitting and replacement
• ready for transition from Rxxx to CO2 - environmently friendly

The probe of surface mounted temperature sensors is screwed, clamped or fixed with a magnet on a flat or curved surface or connected to a handgrip. The overbraided leadwire are Fiberglass, Silicone or Teflon insulated and can be connected to a portable temperature reader, electrical plug or extension.

Surface sensors are used in machines, vehicles, HVAC, water pipes, low pressure steam, refrigerants, food products, autoclave, ovens, etc.

HVAC sensors for temperature measurement in buildings, offices, radiator surfaces, industrial work spaces, semi-liquids and lose materials, ventilation channels, open spaces with optional 4-20mA transmitter.

The Kirchner MSKW limit switch are used for remote monitoring of measuring limits in variable area flow meters with borosilicate glass tubes. The reed switch is actuated by a magnet installed in the float to switch contacts.

• changeover, normally closed or open model options
• easy to adjust over the complete measuring range
• fiberglass-reinforced polyamide or stainless steel housing
• no power supply needed
• for use in explosive areas

RHT Climate Transmitters Wall Mount (WM) and Duct Mount (DM) models from Limatherm incorporate high-precision, stable sensors for measuring

• temperature and
• relative humidity

Measurements of exhaust air to regulate drying chambers in brick factories.

Brick drying happens in drying chambers that are fed with pallet trucks. The goal is to reduce any residual moisture to optimise the following burning process.

EFS Flow switches from Ensim detect if there is liquid flow in pipes. They can be mounted horizontally or vertically. The set switch value can be adjusted by rotating the washer inside the body.

• Mounted between flanged or pipe unions (treaded)
  
• protective tube – customized scales specific to the medium
  
• For liquids, gases, aggressive, corrosive media
  
• Limit switches or linear position sensor

• Gas and liquid flow - VA float principle
  
• stainless steel VA w. PTFE lining or fully PP/PVC
  
• Low Pressure Loss
  
• Indication via Magnetic Coupling
  
• Individually calibrated - medium specific scale
  
• Accuracy: ±1.6%