Electro Magnetic Flowmeter
The flow and volume will be displayed at the electronic transmitter
No disturbance or restriction of flow
No moving parts - no wear and tear, virtually no pressure loss
Insensitive to fluid density, temperature, pressure, viscosity
Can be used for different types of conductive liquids (calibration with water required)
Ultrasonic Clamp-On Flowmeter
Ultrasonic Clamp-On Flowmeter series measure the velocity of a wide range of liquids and pipe sizes up to 5000 mm diameter with high accuracy and reliability to calculate the volume flow. The clamp-on transducer with a high quality PEI sensor can be easily connected outside the pipe during flow operation without interruption of the pipe flow. No pipe cutting or adjustment is required. Maintenance is low as there are no moving parts involved in the non-intrusive ultrasonic measuring process.
Portable Ultrasonic Clamp-On Flowmeter
The Schmierer SEA UFP1.0 portable clamp-on ultrasonic flowmeter is the ideal flow measurement tool for short or long-term monitoring of several flow points, data logging and verification of buit-in flowmeters.
The transducers are easily set up and can be used for pipe sizes from DN 25 to 5000. The ergonomically designed handheld transmitter comes with a metal protection case against corrosion and a backlit color digital display. The recharchable battery lasts for 12 hours of continuous operation.
Vortex Flowmeters measure the volumetric flow of fluids (gases, vapors, liquids) in closed pipes. It is based on the Vortex shedding principle, (or Karman Vortex Effect). The fluid passing through the measuring tube is separated by a triangular prism with a broad flat front and generates two lines of eddies or vortices, the Karman Vortex shedding street. The vortex shedding frequency is proportional to the flow rate.It is detected by a sensor with 4 piezo-electric elements and converted into an electronic output signal.
Turbine Liquid Flowmeter
Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pickup, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.
- High accuracy, ±0.2%, ±0.5%, ±1.0%
- Small, compact and lightweight, easy install and maintenance, wide range
- opt. Sanitary Versions: clamp-on, anti corrosive material
Notice: Filter is necessary if the liquid is not clean (containing solid particles, etc.)