The SRU25X lightweight, stainless steel pressure gauge with heavy duty mini diaphragm seal is the ideal choice for

• corrosive, viscous, sedimentous process media
• with a high temperature
• or high pressure

The diaphragm is AISI 316L welded to the body to ensure separation of the filling fluid from the process medium.

The PTX-36 Pressure Transmitter from Schmierer SEA with local display with

• both analog (solid front gauge case)
• and 4-20 mA output for PLC/PID and data loggers

shows clear reading in the case of power failure.
It is used in Pharmaceutical, OIL&GAS, Refrigeration, HVAC and Compressor industries. 

Rough industrial work environments with

• vibrations
• sudden pressure changes or
• high purity demands

require a special protection mechanism for the pressure gauge movement with the needle pointer. The Manodamp® technology offers this solution.

Bopp & Reuter Filling and Dosing Solutions for water-based media in the Beverage, Chemical and Pharmaceutical Industry:

• shortest filling time: < 0.1 second
• highest measuring accuracy: 0.01%
  
• lowest conductivity: >1µS/cm

Complete systems with flow meter, batch controller, valves and nozzles and flow computing operator terminal.

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures:

• for hydrocarbons, highly aggressive chemicals, beverages, pastes, foams
• high accuracy (up to 0.01%) - custody transfer - long term stability
• tuning fork principle - robust design - maintenance free
• 400 point correction table for customized parameterization
• Output signals scalable for density and concentration, HART
• Ex protection: flameproof or intrinsically safe

The DIMF liquid density meter from Bopp & Reuther is used for continuous measurement of the density/concentration of liquids or liquid mixtures

• acids and bases (hydrochloric/sulphuric/nitric acid, sodium hydroxide, aromatic chlorine solution, ammonia, urea, chlorine, caustic soda,…)
• alcohol and solvents (ethanol, methanol, DMAC, methyl butanol, aceton, glycol, adblue, anti-freeze…)
• solids in liquids (porcelain, ketchup, fat in milk, sugar/Brix, water/starch, tartaric acid…)
• Density measurement (hydro carbons, bio fuel, air bubbles in water …)

The dydaqlog datalogger from Mueller Industrie Elektronik for

• flexible, adjustable input - for 16 different analog sensors
  
• reliable data recording with simple, intuitive setup and operation
• inbuilt webserver:no extra charge for webservice or software

The measured data are available anytime, anywhere in the Industrial Internet of Things IIoT.

The pharmaceutical industry is highly regulated and has a need for measurement performance and traceability. 

Rheonik sanitary sealless mass flow sensors do not contain any elastomer seals and are available with fully wetted materials traceability. 

Rheonik meters offer preferred materials and high performance measurement with a reduction in documentation burden for all sanitary flows.

The probe of surface mounted temperature sensors is screwed, clamped or fixed with a magnet on a flat or curved surface or connected to a handgrip. The overbraided leadwire are Fiberglass, Silicone or Teflon insulated and can be connected to a portable temperature reader, electrical plug or extension.

Surface sensors are used in machines, vehicles, HVAC, water pipes, low pressure steam, refrigerants, food products, autoclave, ovens, etc.

The  alternative to PLCs to realize comprehensive solutions for the control, regulation and visualization of processes up to evalution.

• Programming with function blocks
• Drag & Drop
• Reducing the programming effort
• PLC programming not required
• High time saving compared to PLC programming