Let me give you a quick overview on our highlights this year:
Pressure Gauges with mechanical stabilizer movement
- Silicon Jelly Stabilizer Movement - no glycerine oil filling or maintenance required, no risk of contamination
- Rugged Construction:
- Seamless Tube Bourdon, Socket SS316L - NACE MR 0175
- White Aluminium re-adjustable Dial
- Safety Glass
- Case SS304, NBR Gasket, IP 66 protected
- Temperature compensated Neopren Rubber Blow Out Disc
- TIG welding - TÜV - Helium Leak tested
- Dual display bar/psi
- Laser printed serial number for clear identification and warranty tracking
- opt. with Diaphragm Seal, (threaded, welded, clamp-on, capillary, etc.)
Smart Pressure Transmitter
- European product, ATEX, IECEx, SIL2, CE, MID, DNV certified
- 5 years manufacturer warranty
- 4-20mA, HART
- Smart Display with backlight
- Accuracy 0,075% (0,05% on request)
- Absolute, Gauge and Vacuum, DP pressure of gases, vapors and liquids.
- Range: min -7 to 7 mbar, max 0 to 1000 bar (DP min 0-2 mbar, max 0-70 bar)
Applications: Boiler, DP level, pressure
Flap Flowmeter
- flow display on glass pane or pointer display
- robust device - vertical or horizontal installation
- grey cast iron, SS, ruber lining
- opt. limit switches or 4-20mA output
- DN 15 to 200
Applications: Slurries, Oil Water Separation
Oval Wheel Flowmeter
- mid/high viscosity liquids
- high accuracy, ±0,01% to ±0,3%
- low pressure loss
- 25 to 100 mm, 8 l/min to 1,000 l/min
Applications: liquefied gases, acids, alkaline solutions, fats, alcohols, solvents, dispersions, polymers, poly-condensates, paints, colors and adhesives
Electro-Magnetic Flowmeter
- easy installation - low maintenance
- high accuracy (±0.5-1.0%), repeatability, linearity
- low pressure loss, low interference
- for high temp (upto 250°C), outdoor use, ex-proof
- compact/remote type
- RS 485, MODBUS RTU
- Pipe size 15 - 2000 mm
- lining options: PTFE, Fluorsilicone, CR, PFA, F4
Application: Waste Water retention pont, river backflow
Vortex Flowmeter
- for aggressive/corrosive gases, steam, liquids, superheated & saturated steam
- with pressure and temp. compensation
- no moving wear off parts inside, no abrasion
- fully welded SS304 body (opt. SS316)
- Easy installation and flow conversion
Application: Steam Boiler, Biogas
Itabar Pitot Tube Sensors
- liquids, gas & flue gas, saturated and super heated steam
- low installation time and cost, short up/down straight run
- low pressure loss- bidirectional - no moving parts
- long term accuracy ±1%
- up to 400 bar, 1200°C (steam 600°C), pipe size DN 20 - 12000
- free choice of DP Transmitter brand
- options for self air-cleaning and installation/removal during operation (pressure)
Application: Flue Gas Chimneys, Steam Boilers, Exhaust Air
Magnetic Level Indicator
- reliable, maintenance-free, break-resistant construction
- max process pressure 320 bar - temperature -50 through 400 °C
- no power supply needed
- continuous, vibration resistant reading
- Makrolon, Aluminium or SS rails, corrosion free, up to 12 m
- steam jackets for viscous media
- opt. switch/alarm contacts
Application: Tank farm, Storage Tanks
Float or Displacer Level Gauge & Transmitter
- level, interface, volume, mass and SG measurement
- independent of pressure, temperature, conductivity, dielectric, foam or vapor
- Reliable, robust measuring system
- Indicator, no power supply needed
- Suitable for mobile or stationary containers
- MIN-/MAX-alarm limit switches, NAMUR, Ex ia, ATEX
Application: Tank farm, Storage Tanks
Capacitance Level Switch & Transmitter
- measurement of conductive liquid, non-conductive liquid, granulated materials with solid particles, adhesive and acid/basic liquids
- no moving parts
- high pressure and temperature design
- modular structure with easy assembly
- not affected by foam, liquid splashes
- not affected by vibration, robust mechanical structure
- easy zero span adjustment
- reverse assembly
- opt. explosion proof
Application: Tank farm, Storage Tanks
We are looking forward to seeing you and giving you a hands-on demo experience at our booth.
